Hello Crafty Friends! Laurie here again! I am sharing My Floral Bridge Card using the Fragrant Layers Bundle by Stampin’ Up! I decide to make a triple panel bridge card to show off the beautiful die cuts from the Fragrant Layers Dies. Don’t you just love it when the card is closed, and the insides are hidden creating a nice surprise as the recipient opens the card!
The Details of My Floral Bridge Card
For my card, I wanted to showcase the Lovely & Beautiful Specialty Designer Series Paper with its metallic gold foil details.
First, I created the card base and cut it according to the measurements below. I went with larger side panels since I didn’t want too much space on either side of my central die cut panel. Plus, the “floral bridge” limited how wide it could be too.
Close Up of Focal Point
I thought it would be a fun bridge if I used the largest solid floral to join my two side panels! Old Olive leaves tie in the DSP colours and added some interest.
The sentiment was stamped in Old Olive and die cut using the flag in the die set.
For the central panel, I used the background floral die and layered the Lovely & Beautiful DSP behind it. Love that it peeks through!
Second Panel inside Card
For the inside, I love how the gold accents on the DSP are revealed as you open the card! A Basic White message piece was stamped in Peach Pie and added to the card base.
Third Panel Inside Card
A scattering of Pearlized Faceted Circles added some sparkle to the front.
Instructions:
Score and cut card base.
Die cut the central panel with the background floral die
Embossed the Basic White panels with the Eyelet Embossing Folder and adhere to side panels
Using a strong glue, like liquid glue, adhere the Peach Pie floral die cut to side panels. Tuck in Old Olive leaves.
Stamp sentiment and pop up
Adhere the DSP to the back of the central panel
Stamp flower on inside Basic White piece and adhere making sure to line up with the DSP
Inks: Old Olive Classic Stampin’ Pad (147090), Peach Pie Classic Stampin’ Pad (163810)
Paper: Fresh Freesia (155613), Basic White (166780), Peach Pie (163799), Old Olive (100702), Lovely & Beautiful 12” x 12” Specialty Designer Series Paper (166957)
Accessories: Eyelet 3D Embossing Folder (163414), Pearlized Faceted Circles (166978), Paper Trimmer (152392), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Multipurpose Liquid Glue (110755)
Close Up of Floral Die Cut
Measurements:
Fresh Freesia:
5 ½” x 8 ½” scored 4 ¼” and cut at 1 ¼” and 4 ¼”
Basic White:
4-1/8” x 1-1/8” (2 Pieces)
4” x 2 ¾”
Scrap for Sentiment
Peach Pie:
2 ½” x 4”:
Old Olive:
Scrap for Leaves
Lovely & Beautiful Specialty Designer Series Paper:
4” x 2 ¾”
More Information on My Floral Bridge Card
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Beautiful Valentine Cards using the Special Delivery January 2026 Paper Pumpkin Kit by Stampin’ Up! I made 5 alternative cards including 3 with fun folds and 2 as regular cards.
But, first, here are the three cards that the kit makes. Craft the prettiest handmade valentines with the Special Delivery Paper Pumpkin Kit! These charming floral cards are perfect for sweet messages to friends and loved ones, with gold foil and nostalgic postage stamp designs to make every note feel special.
Special Delivery January 2026 Paper Pumpkin Kit
The Details of My Beautiful Valentine Cards
My Gate Fold Card
For my card, I used one of the note cards in the kit but scored it at 1-7/8” and 5-5/8” to create my gate. Next, I cut apart a blue envelope from the kit to decorate the front of my card. I trimmed down the front of the envelope so that the address label was centred. I kept 2 strips of leftover envelope for the inside of my card.
My Gate Fold Card
For my focal point, I used the blue flowers ephemera and centred it in the address label. I stamped the “Love Heart” sentiment in Blueberry Bushel and used a circle die to cut it out. Then, I used a Spotlight in Nature die to die cut a Blueberry Bushel mat. A scattering of Rhinestones added sparkle.
Inside Panel of Gate Fold Card
For the inside gate part, I used the postage die from the Beautiful Blooms Add-on Dies to die cut a Basic White piece on which I stamped the sentiment and roses from the Kit. This was matted with a Blueberry Bushel mat. A strip of the envelope was tucked in behind this to tie in the front.
Inside Gate Fold Card
Since the original fold for the card was on the inside, I added a Blueberry Bushel mat to cover it up. Then, I stamped the sentiment on Basic White and added a strip of the envelope making sure that it lined up with the strip on the inside gate part.
Supplies:
Stamps: January 2026 Special Delivery Paper Pumpkin Kit
Inks: Blueberry Bushel (147138)
Paper: Basic White (166780), Blueberry Bushel (146968), Blue Envelope in Kit
Accessories: Rhinestone Basic Jewels (144220), Beautiful Blooms Add-on Dies (168666), Stylish Shapes Dies (159183), Spotlight on Nature Dies (163580), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Close Up of Focal Point
Measurements:
Basic White: (3 Pieces)
3 ¾” x 2 ½”
4 ¾” x 3 ½”
Scrap for Sentiment
Blueberry Bushel: (4 Pieces)
4-7/8” x 3-5/8” (2 Pieces)
4” x 2 ¾”
Scrap for Sentiment
Envelope:
3 ¾” x 3 ½” (Front)
3/8” x 3 ½”
3/8” x 1-7/9”
Note Card Base from Kit:
Scored at 1-7/8” and 5-5/8”
From Kit:
Blue Flowers Ephemera
Top View of Gate Fold Card
My Bridge Card
For my next alternative card, I decided to create a bridge card using the pink plaid card base from the Kit. The floral postage ephemera was perfect for this kind of card! So, I cut the front at 1” and 4 ½” up to the fold to create my 3 panels.
My Bridge Card
Next, I stamped my “Love Heart” sentiments in various places while I had the floral ephemera in place. Then, I used the Foam Adhesive Sheets to die cut a Poppy Parade “Beautiful” from the Beautiful Blooms Add-on Dies. I only added 2 popped up flowers to my card front and reserved the other one for the inside.
Inside Panel of Bridge Card
Once the front was done, it was time to work on the inside panel. Again, I stamped the “Love Heart” sentiments but made sure they were hidden when the card was closed. I used the postage die from the Beautiful Blooms Add-on Dies to die cut a Garden Green piece for my background. I decorated it with 2 postage stamp ephemeras and the remaining flower.
Inside Bridge Card
For the inside, I placed strips of leftover envelope from the prior card and placed them on either side. Then, I stamped the 2 sentiment stamps to complete my card.
Supplies:
Stamps: January 2026 Special Delivery Paper Pumpkin Kit
Inks: Poppy Parade (In Kit)
Paper: Poppy Parade (119793), Garden Green (102584)
Accessories: Beautiful Blooms Add-on Dies, Bone Folder (102300), Foam Adhesive Sheets (152815), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Close up of Focal Point
Measurements:
Poppy Parade:
Scrap for Sentiment
Blue Envelope:
4-1/8”x 1-1/8” (2 Pieces)
Garden Green:
3 ¾” x 2 ½”
Card Base from Kit:
Cut front at 1” and 4 ½” up to the fold
From Kit:
3 Flower Ephemeras
2 Postage Stamp Ephemeras
My Easel Card
For my next alternative card using the January 2026 Special Delivery Paper Pumpkin Kit, I made an easel card.
Easel Card
For this card, I used the leftover frame from the punched out postage ephemera. I love this idea of repurposing pieces that would otherwise be thrown out!
First, I created my card base according to the measurements below. Then, I added a Poppy Parade mat and a stamped Bubble Bath mat so that the stamping would show through the empty spots in the frame.
Easel Card Open
Next, I decided to use the leftover postage ephemeras from the card above but popped them up from the frame. I placed 4 of them in their matching spots but I moved the small rose one to give support to my “Beautiful” die cut. To add interest and fill in space, I added a heart puffy sticker from the Softest Spring Mix & Match Puffy Stickers above the “Beautiful” sentiment.
Side View of Easel Card
Finally, for the inside, I used a leftover strip from the blue envelope and matted it with Poppy Parade. “Sending Love” was stamped on a circle from the kit and popped up.
Supplies:
Stamps: January 2026 Special Delivery Paper Pumpkin Kit
Accessories: Beautiful Blooms Add-on Dies, Softest Spring Mix & Match Puffy Stickers (166986), Bone Folder (102300), Foam Adhesive Sheets (152815), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Close Up of Card
Measurements:
Basic White Card Base:
10 ½” x 4-5/8” scored at 2-5/8” and 5 ¼”
Poppy Parade:
5-1/8” x 4 ½”
1-1/8” x 4-3/8”
Scrap for Sentiment
Bubble Bath:
5” x 4-3/8”
Blue Envelope:
1” x 4-3/8”
From Kit:
White Rectangle
4 Postage Stamps Ephemera
Sentiment Circle
Leftover Frame from Postage Stamps
My Other Alternative Cards
Here are my other alternative cards that created using the Special Delivery January 2026 Paper Pumpkin Kit. These final cards are regular card bases using the elements from the Kit with the addition of card stock and the Beautiful Blooms Add-on Dies.
MySketch Card
Stampin’ Up! has a sketch challenge going on and I thought the postage stamps ephemera lent themselves to it. #CreativeChallengeSU
Stampin’ Up! Sketch
I used one of the card bases and added a strip from one of the green envelopes to the top of my card. To add interest, I added a die cut gold “Beautiful” and a thin gold border to my header. Then, I layered the ephemera according to the sketch. I decided to add some gold embossed “Love Heart” sentiments as the smaller elements in the sketch. These were punched out with a 1” punch from my stash. I also gold embossed the “Happy Valentine’s” sentiment. Lots of golden accents for this card!
My Sketch Card
Puppy Valentine Card
For my last alternative card, my puppy literally ate part of my card! Lol! I was working on my cards and noticed that my puppy was chewing! I had dropped the green leaves and he discovered them. The top is a photo of what was left of it after he snacked on it.
Leftovers from Puppy
So, it became part of one of my alternative cards! I kept the background the same as the card in the kit but added a Garden Green backdrop to my rose. For the rose, I cut the bottom row of petals off, glued them down and then used dimensionals to pop up the central part. It gave it a fun 3D look!
Puppy Valentine Card
Then, I tucked in the remaining leaves around the rose. I used the Foam Adhesive Sheets to die cut a poppy Parade “Beautiful” from the Beautiful Blooms Add-on Dies. Can you tell I love this die cut word! I used it on 4 of my 5 alternative cards! Lol!
As a finishing touch I added a butterfly puffy sticker from the Softest Spring Mix & Match Puffy Stickers.
More Information on My Beautiful Valentine Cards
For more of my Stampin’ Up! Paper Pumpkin cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Fall for Toile Alternative Cards using the Fall for Toile September 2025 Paper Pumpkin Kit by Stampin’ Up! I made a total of 6 alternative cards, but I’m only sharing 5 here. The other one will be posted soon.
But, first, here are the three cards that the kit makes. Celebrate the harvest season with elegant cards inspired by autumn’s beauty. The Fall for Toile Paper Pumpkin Refill includes printed card bases and coordinating envelopes, precut paper and foil pieces, grosgrain ribbon, and everything else you need to continue crafting upscale cards with rich seasonal details.
Fall for Toile September 2025 Paper Pumpkin Kit
The Details of My Fall for Toile Alternative Cards
My Centre-Step Card
For my first alternative card, I used my favourite fun fold and create a centre-step card! I thought this fold would be a fun way to have the leaves extend past the centre panel. I created my focal point using the directions from the kit but just placed it on the centre panel. For the centre panel, I embossed a piece of Cajun Craze with the Sunflower 3D Embossing Folder to add visual interest without detracting from the focal point.
My Centre-Step Card
Next, I stamped the white printed card base pieces with the leaves just like in the original directions. A piece of the grid printed card base was added at the bottom.
Side View of My Centre-Step Card
Measurements:
Pecan Pie Card Base:
11” x 4 ¼” cut/scored according to template below
Cajun Craze Centre Panel:
2-1/8” x 4 ½”
2 Side Strips:
7/8” x 4-3/8”
Bottom Grid Panel:
7/8” x 4-1/8”
Other Pieces from Kit:
2 Precut Foil Leaves
2 Precut Leaves
Sentiment Circle
Grosgrain Ribbon
My Double Z-Fold Card
For my second alternative card, I decided to create a double z-fold card. I thought it would be a fun alternative card for this Paper Pumpkin.
My Double Z-Fold Card
So, I cut apart a toile card base to use it for the two layers. For the front, I made it similar to the design used in the kit and matted it with Cajun Craze card stock.
Top View of My Double Z-Fold Card
Since the other z-fold was inside, I kept is simple and just added the toile paper and a Cajun Craze mat to keep it from being too bulky.
Inside of My Double Z-Fold Card
Finally, I added a piece of Very Vanilla to the inside on which I stamped a sentiment and leaves.
Measurements:
Mossy Meadow Card Base:
10 ¾” x 5 ½” scored at 1-5/8”, 3 ¼”, 7 ½” and 9-1/8”
Cajun Craze:
5” x 3 ¾”
4 ¼” x 3”
Toile Card Base:
4 ¾” x 3 ½”
4″ x 2 ¾”
Very Vanilla:
5 ¼” x 4”
Other Pieces from Kit:
Precut Frame
Precut Stamped Circle
Thankful Sentiment
My Triple Panel Bridge Card
For my next Fall for Toile Alternative Card using Fall for Toile September 2025 Paper Pumpkin Kit, I made a triple panel bridge card.
My Triple Panel Bridge Card
So, I took a white printed card base and cut with my Paper Trimmer 1” in on either side of the front to create 3 panels. The Precut Corn Field fit perfectly for my bridge on the front. I added the pumpkins and used the Gift of Fall August 2019 Paper Pumpkin to stamp the “Happy Thanksgiving”.
Middle Panel of My Triple Panel Bridge Card
For the middle panel, I added a piece of the grid printed card base and then mounted the round circle with the stamped the sentiment. A scattering of die cut leaves using the Circle of Seasons Dies added a whimsical feel. Two strips of Cajun Craze embossed with the Sunflower 3D Embossing Folder were adhered to the card base on either side of the middle panel.
Inside of My Triple Panel Bridge Card
Finally for the inside, I stamped a sentiment from the same Gift of Fall Paper Pumpkin Kit since we have a friend coming for Thanksgiving. The embossed Cajun Craze pieces frame the sentiment perfectly.
Measurements:
White Printed Card Base:
Front of card cut at 1″ and 4 ½”
Grid Piece:
4-1/8” x 3 3/8”
Cajun Craze (2 Pieces):
4-1/8” x 7/8”
Scraps Timid Tiger and Darling Duckling
Other Pieces from Kit:
Precut Corn Field
Precut Pumpkins
Flag Sentiment
Precut Stamped Circle
My Easel Card
For this alternative card, I decided to create a simple easel card using the same design as the kit but added a score down the front at 2-1/8” to create my fold.
My Easel Card
For the inside, I cut apart an envelope and used a strip from the flap to add interest. The circle with the acorn was popped up to create my stopper.
Side View of My Easel Card
Measurements:
Grid Card Base:
8 ½” x 5 ½” scored at 2-1/8”
Envelope:
1” x 5 ¼”
Other Pieces from Kit:
Corn Field
Precut Fox
Precut Pumpkins
Flag Sentiment
Precut Stamped Circle
My Hello Thanksgiving Card
For my last alternative card, I had a number of pieces leftover and decided to use what I could. So, I use the leftover toile card base and added a Cajun Craze border. This I mounted onto a white printed card mat and then onto a Cajun Craze card base.
My Hello Thanksgiving Card
To help anchor the leaves, I die cut a circle using the Circle of Seasons Dies from the leftover envelope. Next, I die cut the “Hello” and added it to the circle. The Happy Thanksgiving was stamped using the same Gift of Fall Paper Pumpkin Kit onto the flag. The acorn circle helped to finish off the sentiment and balance out the one copper leaf I had leftover.
Close Up of Focal Point
Measurements:
Cajun Craze:
8 ½” x 5 ½” scored at 4 ¼”
3-3/8” x 5-3/8”
Scrap for hello
Envelope:
Scrap
White Printed Card:
4-1/8” x 5-3/8”
Other Pieces from Kit:
Precut Foil Leaf
2 Precut Leaves
Acorn Circle
Sentiment Flag
More Information on My Fall for Toile Alternative Cards
For my other alternative tri-fold shutter card using the Fall for Toile Paper Pumpkin Kit, please click here or on the photo.
Thankful Shutter Card
Downloadable Centre-Step Card Template
To download a PDF of the Centre-Step Card Template, please click here or on the picture.
Centre-Step Card Template
For more of my Stampin’ Up! Paper Pumpkin cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Home for the Holidays Alternatives using the Home for the Holidays Paper October 2023 Pumpkin Kit by Stampin’ Up! When I saw this kit, I knew that I wanted to make some alternative cards! In fact, I had so much fun that I made 5 of them! Lol! I went into detail for two of them and have posted the others along with a downloadable Faux-Step Template at the end of this post.
The Details of My Home for the Holidays Alternatives
For my cards, I thought a faux-step card would be perfect way to use the detailed pre-cut village scenes! Plus, it allowed me to move the faux step to where I thought it worked best on each card!
So, I cut one of the card bases from the Paper Pumpkin Kit creating a 3” piece and a 2 ½” piece. Thus, allowing me to make two cards from this one card base! Next, I used my Paper Trimmer to cut a Thick Basic White and a Night of Navy card bases using the template at the end of this post for measurements.
Basic White Alternative Card
For the Basic White card, I used the back of an envelope from the Warm Wishes Cards & Envelopes to cut a piece of the red diagonal stripes for behind my scene. I love how it makes the scene pop! Next, I placed the faux step in the centre since you can see the trees on it through the village.
Basic White Alternative Card
The rest of the card was built according to the placement in the instructions. I just made sure that the dimensionals for the village were on the narrow band at the bottom and my sentiment was attached to the faux step.
Side View of First Card
Night of Navy Alternative Card
For my Night of Navy card, I used one of the cards from the 5” x 7” Warm Wishes Cards & Envelopes. I love that the night scene continues onto the back of the cards! This allowed me to cut a 5-3/8” piece of the night sky with the trees making sure that I did not include the moon in my piece (we did not need two moons on the final card! Lol!). However, this left a scored line on my final card. So, to cover the score line, I placed the faux step to the right. It also helped to balance out the smaller pre-cut village that I used.
In addition to this, I added a strip of snow from my cut-up Warm Wishes Card on the final card base under my village.
Night of Navy Alternative Card
Since the smaller pre-cut village ended short on my card, I decided to place the glittery strip and stamped sentiment to the left covering the void. I used my paper snips to trim them down.
Side View of Second Card
The final thing was to add the glitter glue that came in the Kit to the snowy villages for both cards.
Supplies:
Stamps/Bundles/Dies: Home for the Holidays Paper Pumpkin Refill (163969)
Inks: Real Red Spot (in Kit)
Paper: Thick Basic White (159229), Night of Navy (100867), Warm Wishes Cards & Envelopes (163985)
Accessories: Paper Trimmer (152392), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Stampin’ Seal (152813), Mini Glue Dots (In Kit)
Measurements:
Thick Basic White/Night of Navy Card Bases:
8 ½” x 5 ½” cut/scored according to template below
Home for the Holidays (1 card):
3” vertical cut and folded (leaving 2 ½” piece for other card)
Warm Wishes Cards & Envelopes:
5-3/8” x 3” (2 pieces – one envelope and one card)
5 ½” x 1” (strip of snow)
More Information on My Home for the Holidays Alternatives
Downloadable Faux Centre-Step Template
To download a PDF of the Faux Centre-Step Template, please click here or on the picture.
Downloadable Faux Centre-Step Template
These are three other alternative cards that I made using the Paper Pumpkin Kit and the matching Warm Wishes Cards and Envelopes.
Other My Home for the Holidays Alternatives
Bridge Card Instructions
Card base cut at 1-1/8” from either end leaving 3 ¼” centre piece. Inside diagonal red pieces are from a Warm Wishes Envelope and measure 4” x 1”.
Triple Layer Alternative Bridge Card
Easel Card Instructions
I made the card according to the kit’s instructions, but I scored a fold into the card base at 1-1/2” up from the bottom. I used a 1/2” x 5 1/4″ strip of sky from a card from the Warm Wishes Cards for a ledge for my houses to rest against.
Alternative Easel Card
Box Card Instructions
I used back of a card base and a piece of Warm Wishes Card measuring at at 5 1/2” x 4 1/4” scored both pieces at 1/2”, 1” on each horizontal side for both pieces. For centre scene inside card, I cut front of one card 3 1/8” x 4 1/4” tall.
Alternative Box Card
More of my alternative Paper Pumpkin cards, please click here.