Daisy Daydream Alternative Cards

Daisy Daydream Alternative Cards - 5 cards with daisies on them
Daisy Daydream Alternative Cards

Hello Crafty Friends! Laurie here again! I am sharing my Daisy Daydream Alternative Cards using the Daisy Daydream March 2025 Paper Pumpkin Kit by Stampin’ Up! I loved this kit with its pretty paper pieces (especially those bees!), printed cards and envelopes! So, I made five alternative cards with only adding Balmy Blue card stock to two of them.

But, first, here are the three cards that the kit makes. Perfect for all occasions, these beautifully crafted cards bring a touch of nature-inspired charm to your handmade creations.

Three cards with daisies on them
Daisy Daydream March 2025 Paper Pumpkin Kit

The Details of My Daisy Daydream Alternative Cards

My Centre-Step Card

For my first alternative card, I used my favourite fun fold and create a centre-step card! The beautiful printed card bases lend themselves to this fun fold. The only extra product that I added was the Balmy Blue card base which was cut and scored according to the template below.

A card with daisies on it with a fun fold
My Centre-Step Card

For the centre panel, I cut the front of one of the daisy cards in half and used the right side for my centre panel. Next, I popped up a large daisy at the top and tucked in a honeycomb piece so that it hung off the edge.

The side panels were from the envelope with the daisies on the front that I cut apart. Since the panels were so thin, I was able to cut both panels using just the front left side of the envelope.

Side view of card
Side View of Centre-Step Card

For the bottom panel, I added the daisy chain behind my sentiment and tucked in another honeycomb hanging off the edge of the centre panel. The daisy chain was a little long. So, I used my paper snips and trimmed off the green leaves on either side of it.

The finishing touch was the bee popped up on the centre panel. You might notice that I again had the bee hanging off the edge of the centre panel. I loved this look which added visual interest and brought the eye to the back panels.

Measurements:

  • Card Base:
    • 11” x 4 ¼” cut/scored according to template below
  • Centre Panel:
    • 2-1/8” x 5-3/8”
  • 2 Side Strips (from Envelope):
    • 7/8” x 4-3/8”
  • Other Pieces from Kit:
    • Daisy Precut Paper Pieces
    • Bee Precut Paper Piece
    • Honeycomb Paper Pieces
    • Sentiment Piece

My Easel Card

For my second alternative card, I decided to create an easel card with the daisy chain being used inside as my stopper. So, I scored the front of the Blue Card Base from the Kit in half at 2-1/8” to create my fold.

I used the remaining half of the Daisy card front and cut the back of that card base in half to use one panel for the front and the other panel on the inside.

Another card with Daisies on it
My Easel Card

For my focal point, I layered several elements from the Kit. I used the leftover circle from the Circle Layered piece to matt the green circle. Then, I added the full-length daisy making sure that when the card was in easel layout that the daisy did not extend beyond the card at the bottom. I tucked in a honeycomb behind my sentiment and popped up the bee. Note: Only add adhesive to the bottom of this circle focal point.

Card open
Easel Card Open

For the inside, I added the final panel from the daisy card base and popped up the daisy chain to create the stopper. I love how this looks when the card is in easel form with the daisy chain mirroring the daisies on the card front.

Measurements:

  • Blue Card base (from Kit):
    • 4 ¼” x 5 ½” scored at 2-1/8”
  • Daisy Card Base (3 Pieces):
    • 2” x 5-3/8”
  • Other Pieces from Kit:
    • Daisy Precut Paper Pieces
    • Bee Precut Paper Piece
    • Honeycomb Paper Piece
    • Green Circle
    • Leftover Circle
    • Sentiment Piece

My Faux-Step Card

For my next alternative card using the Daisy Daydream March 2025 Paper Pumpkin Kit, I made a faux-step card.

I used two of the yellow card bases from the kit to create my card. One I trimmed 3 ½” off the full card base to create my centre panel. For the back panels, I used a full card base and scored it according to the measurements listed below. There was a score from the original card that I ignored. Once that panel with the original score was covered up with the card stock and the printed envelop, it was not noticeable. Hence why my mats are 1/8” instead of ¼” …less card base showing.

A card with a daisy and bee on it
My Faux-Step Card

For this card, the only extra product that I used was some Balmy Blue Card Stock to mat my pieces. The rest was from envelops which included the front right of the blue envelop and the envelope with the bee on the front. Once the envelope with the bee was cut apart, I was able to use the front piece for the back panel that ran the length of the card. Then, I used the back of the envelope for the bottom panel.

Sid elf Card
Side of My Faux-Step Card

Again, for my focal point, I layered several pieces from the kit together.

Measurements:

  • 2 Yellow Card Bases:
    • 4 ¼” x 5 ½” scored at 1 ¼”, 2 ½” and 5 ½”
    • 3 ½” x 8 ½” scored at 4 ¼”
  • Balmy Blue (3 Pieces):
    • 3-3/8” x 4-1/8” (Centre Panel)
    • 1-1/8” x 5-3/8” (Bottom Panel)
    • 2-7/8” x 5-3/8” (Back Panel)
  • Envelope Pieces:
    • 3 ¼” x 4” (Blue Envelope)
    • 1” x 5 ¼”
    • 2 ¾’ x 5 ¼”
  • Other Pieces from Kit:
    • Daisy Precut Paper Piece
    • Bee Precut Paper Piece
    • Honeycomb Paper Piece
    • Green Circle
    • Sentiment Piece

My Birthday Card

For this alternative card, I decided to use the circle layer on top of the daisy card to create a peekaboo to the daisies below. I added several Daisy Pre-cut Paper Pieces around the sentiment and popped up the bee.

A birthday card with Daisies and a bee on it
My Birthday Card

Measurements:

  • Pieces from Kit:
    • Daisy Card Base
    • Circle Layer
    • Daisy Precut Paper Pieces
    • Bee Precut Paper Piece
    • Sentiment Piece

My Thank You Card

For my last alternative card, I had the daisy part leftover from the blue envelop and thought it would be pretty peeking through the circle layer.

A Thank You Car with daisies and two bees on it
My Thank You Card

The daisy just fit in the circle to the point that I adhered it directly to the circle layer. If I had popped it up, the edges would have been noticeable. So, instead, I popped up the whole circle layer.

Once again, I layered several pieces, including a large daisy, sentiment, honeycomb, vellum and a bee, from the kit for my focal point. I added an extra bee since I had one leftover.

Measurements:

  • Blue Envelope
    • Leftover from faux-step card
  • Other Pieces from Kit:
    • Blue Card Base
    • Circle Layer
    • Daisy Precut Paper Piece
    • Bee Precut Paper Pieces
    • Honeycomb Paper Piece
    • Vellum Piece
    • Sentiment Piece

More Information on My Daisy Daydream Alternative Cards

Downloadable Centre-Step Card Template

To download a PDF of the Centre-Step Card Template, please click here or on the picture.

Centre-Step Card Template
Centre-Step Card Template

For more of my Stampin’ Up! Paper Pumpkin cards, please click here.

You will find the items listed above in my online store.

My Butterfly Wishes Card 

My Butterfly Wishes Card - Birthday card with lady holding cake and butterflies flying around
My Butterfly Wishes Card

Hello Crafty Friends! It’s Laurie here! I am sharing My Butterfly Wishes Card as my Design Team Inspiration Card for Conie Fong Art & Design using the Butterfly Wishes image from the Butterfly Wishes Kisses Bundle. She is perfect for those birthday cards we all need! This purchase includes 2 Images:

  • Title1: Butterfly Wishes
  • Title2: Butterfly Kisses

The Details of My Butterfly Wishes Card

I had a lot of fun colouring the Butterfly Wishes image from the bundle with my Copic markers to match my Mintay paper. I thought the Peony Garden paper suited the image since she had peonies in her hair. Finally, I added Wink of Stella to the butterflies to make them shimmer and Glossy Accents to the candle flame.

For my card, I decided to go with a faux-step card so that the beautiful Mintay paper can be visible on the background layer, even behind my focal point. I had a scrap of that paper left over. So, I trimmed it down, turned it over, and added to my front panel where the sentiment was located. Next, I tucked in a Butterfly Border behind this panel since it was perfect for my butterfly motif and added a fun whimsical feel.

Side View of Card
Faux-Step Side View

For the birthday sentiment, I used my Glimmer Hot Foil System (a new toy!) and die cut it out. Then I fussy cut the tea cup and two of the butterflies from the Mintay paper. I love that these images match the papers! I tucked in the sentiment and one of the butterflies around the tea cup to create my sentiment cluster. The other butterfly was added to the top left of my coloured image so that it hung over the edge between the layers.

The finishing touch was a scattering of rhinestones to add even more sparkle to my card.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E29/E27/E25/E23/E21
Pinks: R35/R32/R11/R000 
Blues: BG13/BG11/BG10
Yellows: Y35/Y11 
Greens: G99/G94/G21
Whites: C3/C1/0

Close Up of lady holding cake
Close Up of Digital Stamp

————————–

Card Recipe for My Butterfly Wishes Card:

Butterfly Wishes Kisses Bundle, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Peony Garden 8” x 8” Paper Pad, Mintay Papers
Curved Everyday Sentiments Hot Foil Plate & Die Set, Spellbinders Paper Arts 
Glimmer Hot Foil System, Spellbinders Paper Arts
Gold Foil Paper, Spellbinders Paper Arts
3 ¾” and 3 ½” Layering Stitched Rectangles, Memory Box
Champagne Rhinestones Basic Jewels, Stampin’ Up!
Butterfly Border Die, Joy Crafts
Paper Snips, Stampin’ Up!
Wink of Stella, Stampin’ Up!
Glossy Accents, Ranger

Finished card size: 5 ½” x 5 ½”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Butterfly Wishes Kisses Bundle for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

Home for the Holidays Alternatives

Home for the Holidays Alternatives - two Christmas cards with village scenes on them
Home for the Holidays Alternative Cards

Hello Crafty Friends! Laurie here again! I am sharing my Home for the Holidays Alternatives using the Home for the Holidays Paper October 2023 Pumpkin Kit by Stampin’ Up! When I saw this kit, I knew that I wanted to make some alternative cards! In fact, I had so much fun that I made 5 of them! Lol! I went into detail for two of them and have posted the others along with a downloadable Faux-Step Template at the end of this post.

The Details of My Home for the Holidays Alternatives

For my cards, I thought a faux-step card would be perfect way to use the detailed pre-cut village scenes! Plus, it allowed me to move the faux step to where I thought it worked best on each card!

So, I cut one of the card bases from the Paper Pumpkin Kit creating a 3” piece and a 2 ½” piece. Thus, allowing me to make two cards from this one card base! Next, I used my Paper Trimmer to cut a Thick Basic White and a Night of Navy card bases using the template at the end of this post for measurements.

Basic White Alternative Card

For the Basic White card, I used the back of an envelope from the Warm Wishes Cards & Envelopes to cut a piece of the red diagonal stripes for behind my scene. I love how it makes the scene pop! Next, I placed the faux step in the centre since you can see the trees on it through the village.

First Christmas card with village scene on it
Basic White Alternative Card

The rest of the card was built according to the placement in the instructions. I just made sure that the dimensionals for the village were on the narrow band at the bottom and my sentiment was attached to the faux step.

Side View of Card
Side View of First Card

Night of Navy Alternative Card

For my Night of Navy card, I used one of the cards from the 5” x 7” Warm Wishes Cards & Envelopes. I love that the night scene continues onto the back of the cards! This allowed me to cut a 5-3/8” piece of the night sky with the trees making sure that I did not include the moon in my piece (we did not need two moons on the final card! Lol!). However, this left a scored line on my final card. So, to cover the score line, I placed the faux step to the right. It also helped to balance out the smaller pre-cut village that I used.

In addition to this, I added a strip of snow from my cut-up Warm Wishes Card on the final card base under my village.

Second Christmas Card with village scene
Night of Navy Alternative Card

Since the smaller pre-cut village ended short on my card, I decided to place the glittery strip and stamped sentiment to the left covering the void. I used my paper snips to trim them down.

Side View of Second Card
Side View of Second Card

The final thing was to add the glitter glue that came in the Kit to the snowy villages for both cards.

Supplies:

Stamps/Bundles/Dies: Home for the Holidays Paper Pumpkin Refill (163969)

Inks: Real Red Spot (in Kit)

Paper: Thick Basic White (159229), Night of Navy (100867), Warm Wishes Cards & Envelopes (163985)

Accessories: Paper Trimmer (152392), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Stampin’ Seal (152813), Mini Glue Dots (In Kit)

Measurements: 

  • Thick Basic White/Night of Navy Card Bases:
    • 8 ½” x 5 ½” cut/scored according to template below
  • Home for the Holidays (1 card):
    • 3” vertical cut and folded (leaving 2 ½” piece for other card)
  • Warm Wishes Cards & Envelopes:
    • 5-3/8” x 3” (2 pieces – one envelope and one card)
    • 5 ½” x 1” (strip of snow)

More Information on My Home for the Holidays Alternatives

Downloadable Faux Centre-Step Template

To download a PDF of the Faux Centre-Step Template, please click here or on the picture.

Downloadable Faux Centre-Step Template
Downloadable Faux Centre-Step Template

These are three other alternative cards that I made using the Paper Pumpkin Kit and the matching Warm Wishes Cards and Envelopes.

Other My Home for the Holidays Alternatives

Bridge Card Instructions

Card base cut at 1-1/8” from either end leaving 3 ¼” centre piece. Inside diagonal red pieces are from a Warm Wishes Envelope and measure 4” x 1”.

Another alternative card with a fun fold
Triple Layer Alternative Bridge Card

Easel Card Instructions

I made the card according to the kit’s instructions, but I scored a fold into the card base at 1-1/2” up from the bottom. I used a 1/2” x 5 1/4″ strip of sky from a card from the Warm Wishes Cards for a ledge for my houses to rest against.

Another Alternative fun fold card
Alternative Easel Card

Box Card Instructions

I used back of a card base and a piece of Warm Wishes Card measuring at at 5 1/2” x 4 1/4” scored both pieces at 1/2”, 1” on each horizontal side for both pieces. For centre scene inside card, I cut front of one card 3 1/8” x 4 1/4” tall.

Another alternative fun fold card
Alternative Box Card

More of my alternative Paper Pumpkin cards, please click here.

More of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.