Hello Crafty Friends! Laurie here again! I am sharing The Adventure Continues Card using the Scenic Coast Suite Collection by Stampin’ Up! I made this WV fun fold card for my Hubby for our Anniversary.
For my card, I knew that I wanted to use both of the sailboat and lighthouse scenes from the Sunset Coast Dies for my card. My Hubby grew up sailing with his family. So, I knew these dies would be perfect for him!
The Details of The Adventure Continues Card
First, I scored my Basic White card bases according to the measurements below. Then, embossed the Blueberry Bushel strip with the Forever Plaid 3D Embossing Folder. Once that was done, I adhered the strip of DSP, the embossed piece and the larger piece of DSP to the main card base.
Front of Card
For the smaller card base, I made it 3 ½” square when folded to fit the die cut scenes with a slight border around it. Next, I die cut the scenes from the square Blueberry Bushel pieces and used my White Gel Pen to add some highlights to the die cuts.
Tip: I adhered the die cuts directly to the DSP to save paper. I wanted to use the same Sunset DSP for both scenes (a continuation of the scene), but that meant I had to cut the DSP into 3” pieces. If I had popped the Blueberry Bushel up, you would have seen the ends of the DSP. So, instead I adhered them together and popped up the finished focal points on the square card base. The square card base was directly adhered to the main card base centering it.
Top View of Card
Next, I stamped the sentiments in Highland Heather on the Basic White pieces. I wrapped a piece of Linen Thread around the front sentiment and tied it into a knot. The front sentiment was popped up with the Crumb Cake shells tucked in around it. The inside sentiment was adhered to a Night of Navy mat before adding it to the main card base.
The Adventure Continues Card
All that was left was to add some Night of Navy seagulls and matching Sunset Sparkle Sequins.
Supplies of The Adventure Continues Card:
Stamps Sunset Coast Bundle (167781)
Inks: Highland Heather (147103)
Paper: Basic White (166780), Blueberry Bushel (146968), Night of Navy (100867), Crumb Cake (120953), Scenic Coast Designer Series Paper (167773)
Accessories: Forever Plaid 3D Embossing Folder (164049), Sunset Sparkle Sequins (167785), Linen Thread (104199), White Gel Pens (166642), Paper Trimmer (152392), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Detail Scissors (170902)
Sailboat Focal Point
Measurements of The Adventure Continues Card:
Basic White:
5 ½” x 11” scored at 1 ¾”, 3 ½” x 5 ¼”, 7”
3 ½” x 7” scored at 3 ½” along 7” side
3-3/8” x 3-3/8” (Inside Sentiment)
Scrap for Front Sentiment
Blueberry Bushel:
3-3/8” x 3-3/8” (2 Pieces)
5-3/8” x 1-3/8”
Night of Navy:
3 ½” x 3 ½”
Scraps for Birds
Crumb Cake:
Scraps for Shells
Scenic Coast Designer Series Paper:
3” x 3” (2 Pieces)
5-3/8” x 1-3/8” (Front)
5-3/8” x 3-7/8” (Inside)
Lighthouse Focal Point
More Information on The Adventure Continues Card
Here is another WV card that I made in the same format, but with a Night of Navy card base, Basic Black for the silhouettes and embossed sentiment.
Basic Black Version of my Card
One final card that I made, using the same design, but with Gorgeous Grape card stock and white seagulls.
Gorgeous Grape Version of my Card
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing My Birthday Hooray Cards using the Hooray for Birthdays July 2026 Paper Pumpkin Kit by Stampin’ Up! I made 7 alternative cards including 6 with fun folds and a mini slimline card.
But, first, here are the three cards that the kit makes. The Hooray for Birthdays Paper Pumpkin gives you more of the good stuff, including soft pastels, lined card bases, and precut focal pieces, so you can keep creating without starting from scratch. Get back to making birthday cards that come together fast and feel just as fun the second time around.
Hooray for Birthdays July 2026 Paper Pumpkin Kit
The Details of My Birthday Hooray Cards
My Triple Panel Bridge Card
For my first alternative card, I decided to create a triple panel bridge card using a Basic White Card base that I cut according to the measurements below. The Half Circle was perfect for this kind of card! I decorated it according to the directions included in the Kit.
My Triple Panel Bridge Card
Next, I layered my Melon Mambo mats with the matching card panels and adhered them to the card base. Then, I added glue to the sides of the Half Circle and adhered it to the two side panels.
Second inside Panel
Once the front was done, it was time to work on the inside panels. I die cut the circle from the Detailed Flora Dies and stamped the sentiments on it. It is perfectly hid by the Half Circle when closed.
Third Inside Panel
For the inside, I adhered the embossed strips of Melon Mambo on either side. Then, I stamped the sentiment on the Basic White piece and matted it with the Melon Mambo mat which was adhered down.
All that was left was to add the butterflies and ribbon. Note: make sure that the ribbon is only wrapped around the first layer.
Supplies:
Stamps: July 2026 Hooray for Birthdays Paper Pumpkin Kit
Inks: Timid Tiger (In Kit), Melon Mambo (147051)
Paper: Melon Mambo (115320), Basic White (166780)
Accessories: Detailed Flora Dies Add-on (168664), Lazy Daisy 3D Embossing Folder (167196), Brushed Brass Butterflies, Black & White 1/4″ Gingham Ribbon, Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Measurements:
Basic White
Card Base: 5 ½” x 8 ½” scored 4 ¼” and cut at 1 ¼” and 4 ¼”
4” x 2 ½” (Inside)
3” x 3” (Circle)
Melon Mambo (6 Pieces):
4-1/8” x 1-1/8” (4 Pieces)
4-1/8” x 2-7/8” (2 Pieces)
Pink Card from Kit:
4” x 1” (2 Pieces)
4 x 2 ¾”
From Kit:
Half Circle Shape
“birthday” sentiment
Sentiment Flag
Flowers with Centres and Leaves Ephemera
My Gate Fold Card
For my alternative next card, I created a gate fold card. Again, the half shape was perfect for this kind of card. So, I decorated the half circle according to the directions in the Kit.
My Gate Fold Card
Next, I scored my Basic White card base according to the measurements below. Then, I added the ribbon on the front left and right panels before I added the Hydrangea Hue mats and card bases on top. I adhered the half circle focal point to the right panel.
Top View of Card
The inside was decorated next with the Hydrangea Hue mats and Hydrangea Hue card pieces on the panels. The stamped sentiment was then adhered to the centre panel.
Inside of Card
The finishing touch was to add some 2026–2028 In Colour Butterflies in matching colours.
Supplies:
Stamps: July 2026 Hooray for Birthdays Paper Pumpkin Kit
Inks: Melon Mambo (147051)
Paper: Hydrangea Hue (167687), Basic White (166780)
Accessories: 2026–2028 In Colour Butterflies (167656), Black & White 1/4″ Gingham Ribbon, Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Measurements:
Basic White:
4 ¼” x 11” scored at 2 ¾” and 8 ¼”
4” x 5 ¼” (Inside Sentiment)
Hydrangea Hue (5 Pieces):
4-1/8” x 2-5/8” (4 Pieces)
4” x 5 ¼”
Hydrangea Hue Card from Kit (4 Pieces):
4” x 2 ½”
From Kit:
Half Circle Shape
“birthday” sentiment
Sentiment Flag
Flowers with Centres and Leaves Ephemera
My Square Pillar Card
For my third card using the July 2026 Hooray for Birthdays Paper Pumpkin Kit, I made a square pillar card.
My Square Pillar Card
For this card, I scored the card base according to the measurements below to create my pillar. I adhered the ½”tab to the card base by folding two of the panels flat (like you would when placing it in a card) against the card base and tucking in the flap to get placement. I decorate the panels with the Hydrangea Hue mats and the pink card base pieces.
Side View of Card
Then, I decorated the oval according to the kit’s directions. I folded the same two panels flat (like you would when placing it in a card) against the card base and added glue to the centre panel making sure that the oval was centred in the card front.
Next, I added the bouquet ephemera to the inside panel keeping the smaller flowers for another card.
For the back, I stamped the sentiment and added the Hydrangea Hue mat and it to the back of the card.
Back of Card
The finishing touch was to add some 2026–2028 In Colour Butterflies and Brushed Brass Butterflies.
Supplies:
Stamps: July 2026 Hooray for Birthdays Paper Pumpkin Kit
Inks: Timid Tiger (In Kit)
Paper: Basic White (166780), Hydrangea Hue (167687)
Accessories: 2026–2028 In Colour Butterflies (167656), Brushed Brass Butterflies, Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Measurements:
Basic White:
5 ½” x 8 ½” scored at ½”, 1 ¾”, 3”, and 4 ¼”
5 ¼” x 4” (Back Sentiment)
Hydrangea Hue (5 Pieces):
5-1/8” x 1-1/8” (3 Pieces)
5-1/8” x 2-7/8”
5-1/8” x 4-1/8” (Back Mat)
Pink Card from Kit:
5” x 1” (3 Pieces)
5” x 2 ¾”
From Kit:
Oval Shape
“happy” sentiment
Sentiment Flag
Flowers with Centres and Leaves Ephemera
My Centre-Step Card
For my fourth card, I used my favourite fun fold and create a centre-step card! The beautiful shapes of the Kit lend themselves to this fun fold. I have included a downloadable template at the end of this post.
My Centre-Step Card
First, I scored and cut the Basic White card base according to the template below. Then, I decorated the panels with the Hydrangea Hue Card pieces. The focal point was decorated the same as the Kit’s instructions.
Side View of Card
For the inside, I used a mat of Timid Tiger for the Basic White stamped piece.
Inside of Card
The finishing touch was adding ribbon tied in a bow and a scattering of matching In Colour Butterflies.
Supplies:
Stamps: July 2026 Hooray for Birthdays Paper Pumpkin Kit
Inks: Timid Tiger (In Kit), Melon Mambo (147051)
Paper: Basic White (166780), Timid Tiger (165626)
Accessories: 2026–2028 In Colour Butterflies (167656), Black & White 1/4″ Gingham Ribbon, Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Measurements:
Basic White:
11” x 4 ¼” cut/scored according to template below
4 ¼” x 4” (Inside Sentiment)
Hydrangea Hue Card from Kit (4 Pieces):
2-1/8” x 4-3/8 (Centre Panel)
4 ¼” x 7/8” (2 Side Strips)
7/8” x 4-1/8” (Bottom Panel)
Timid Tiger:
4-3/8” x 4-1/8”
From Kit:
Diamond Shape
“hooray” sentiment
Sentiment Flag
Flowers with Centres and Leaves Ephemera
My Other Alternative Cards
For my last three cards, I created two z-fold cards using the card bases provided and a mini slimline card using the leftover bits.
Hooray Z-Fold Card
My Hooray Z-Fold Card
Supplies:
Stamps: July 2026 Hooray for Birthdays Paper Pumpkin Kit
Inks: Melon Mambo (147051)
Accessories: 2026–2028 In Colour Butterflies (167656), Brushed Brass Butterflies, Black & White 1/4″ Gingham Ribbon, Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Measurements:
Pink Card Base (In Kit):
11” x 4 ¼” scored 2 ¾” and 5 ½”
From Kit:
Diamond Shape
Oval Shape
“hooray” sentiment
Sentiment Flag
Flowers with Centres and Leaves Ephemera
Happy Z-Fold Card
My Happy Z-Fold Card
Supplies:
Stamps: July 2026 Hooray for Birthdays Paper Pumpkin Kit
Inks: Melon Mambo (147051)
Paper: Basic White (166780)
Accessories: Detailed Flora Dies Add-on (168664), 2026–2028 In Colour Butterflies (167656), Brushed Brass Butterflies, Black & White 1/4″ Gingham Ribbon, Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Measurements:
Pink Card Base (In Kit):
11” x 4 ¼” scored 2 ¾” and 5 ½”
Basic White (3 Pieces):
3” x 4-3/8” (2 Pieces)
3” x 3”
Hydrangea Hue Card from Kit:
2-7/8” x 4 ¼”
From Kit:
“happy” sentiment
Sentiment Flag
Flowers with Centres Ephemera
Mini Slimline Card
My Mini Slimline Card
Supplies:
Stamps: July 2026 Hooray for Birthdays Paper Pumpkin Kit
Inks: Timid Tiger (In Kit)
Paper: Basic White (166780), Hydrangea Hue (167687), Timid Tiger (165626), Old Olive (100702), Bubble Bath (161718)
Accessories: Detailed Flora Dies Add-on (168664), Brushed Brass Butterflies, Black & White 1/4″ Gingham Ribbon, Bone Folder (102300), Stampin’ Dimensionals (In Kit), Adhesive Roll (In Kit)
Inside of Card
Measurements:
Basic White (3 Pieces):
7” x 6” scored at 3 ½”
3 ¼” x 5 ¾” (Inside Sentiment)
3” x 3“
Hydrangea Hue:
3-3/8” x 5-7/8” (2 Pieces)
Scraps for Flowers
Hydrangea Hue Card from Kit:
2-1/8” x 5 ½”
Pink Card Base:
3 ¼” x 5 ¾”
Scraps for Flowers
Old Olive:
Scraps for Flowers
Timid Tiger:
Scraps for Flowers
From Kit:
Leftover Sentiment Frame: 2 ¾” x 5 ¼”
“hooray” sentiment
Sentiment Flag
More Information on My Birthday Hooray Cards
Downloadable Centre-Step Card Template
To download a PDF of the Centre-Step Card Template, please click here or on the picture.
Centre-Step Card Template
I hope you My Birthday Hooray Cards using the Hooray for Birthdays July 2026 Paper Pumpkin Kit by Stampin’ Up!
For more of my Stampin’ Up! Paper Pumpkin cards, please click here.
You will find the items listed above in my online store.
Cookie Consent
We use cookies to improve your experience on our site. By using our site, you consent to cookies.