wedding card - Stamp With Laurie

My Wedded Bliss Card

May 28, 2024 2 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing My Wedded Bliss Card using the digital stamp Wedding Bells by Tiddly Inks Stamps! This past weekend, we celebrated a wonderful couple who tied the knot!

The Details of My Wedded Bliss Card

For my card, I decided to colour with my Copic markers the couple on the card to look like the bridal couple who were getting married. I added Silver Gelly Roll Pen to the Bride’s tiara, her ring and the veil to tie in the silver embossed sentiment. Next, I used Clear Wink of Stella on her veil for even more sparkle.

The Lady’s Diary papers created an elegant look which tied in the masculine with the pinstripes and the feminine with the florals. The flowers and leaves were also punched out using the matching papers in the Lady’s Diary Pad.

Since this was a wedding card and I wanted an elegant look, I decided to emboss the sentiment before die cutting it out. I added a silver foil border to some leafy vellum that I tucked behind the sentiment. I also silver embossed the inside sentiment, added a silver foil border and a strip of the floral paper.

Finally, for embellishments, I added two heart charms, some silver metallic pearls to mirror the embossed silver accents and pearl jewels for the flower centres.

————————–

Copic Markers

Groom
Skin: E04/E11/E21/E00/E000
Hair: E49/E47/E44/E43/E42
Suit/Tie: B99/B97/B95/B93
Shirt: C3/C1/0

Bride
Skin: E04/E11/E21/E00/E000/R20
Hair: C9/C7/C6/C4/C3
Dress/Veil: B000/B00/0/Silver Gelly Roll Pen
Necklace: B97/B95/B93/R85/Star Dust Stickles

————————–

Card Recipe for My Wedded Bliss Card

Wedding Bells, Tiddly Inks Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Lady’s Diary 6” x 6” Paper Pad, P13
Silver Foil Sheet, Stampin’ Up!
Vellum Basics 12” x 12” Specialty Designer Series Paper, Stampin’ Up!
Something Fancy Dies, Stampin’ Up!
Lifetime of Love Stamp Set, Stampin’ Up!
Special Celebrations Stamp Set, Stampin’ Up!
Versamark Ink, Stampin’ Up!
Silver Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
Hydrangea Punch, Martha Stewart
Leaf Punch, EK Success
Heart Charms, Stampin’ Up!
Festive Pearls, Stampin’ Up!
Pearl Basic Jewels, Stampin’ Up!
Silver Gelly Roll Pen, Sakura
Star Dust Stickles, Ranger
Clear Wink of Stella, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

I also made a Bridal Shower card a while back for the Bride-to-Be using Uptown Couple Emily and Ryan Under the Umbrella by Stamping Bella and thought I would share it here as well.

Bridal Shower Card with a couple kissing under an umbrella — Bridal Shower Card

To view my other Copic Marker cards, please click here.

I hope you liked My Wedded Bliss Card using the digital stamp Wedding Bells by Tiddly Inks Stamps!

Thank you for stopping by!

Hugs,
Laurie

The Perfect Day Card

September 6, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here! I am sharing The Perfect Day Card using the digital stamp After the Vows by Tiddly Inks Stamps. This past weekend we attended a wedding, and this was the card I made for the happy couple to celebrate their love!

The Details of My Card

The digital stamp comes with the couple in full length, but I thought a close-up of the couple kissing would be a lovely focal point. So, I coloured the couple with my Copic markers in tones befitting my couple. The bride has gorgeous flowing locks of hair, and this stamp was perfect to represent her! I added a light coating of white pencil over the veil to differentiate where the veil was on her hair. Unfortunately, it is hard to see in the photo. Finally, I added Clear Wink of Stella to the bride’s veil to give it shimmer. For the groom, I coloured the skin and hair to look like the groom’s Pilipino heritage. This was the first time colouring this skin tone and I was quite happy with how it turned out!

For my card, I decided to create lots of pretty layers with the lace ribbon, heart doily and die cut hearts. The beautiful Craft O’Clock paper was the perfect backdrop with lace, flowing script, worn wood planks and flowers on it!

The sentiment was stamped in VersaMark ink and heat embossed with silver embossing powder to match the sparkly rhinestones and then die cut out. The die cut “love” sentiment was the epitome of what brought these two together to be married.

Finally, I couldn’t resist adding one more heart in the form of the sliver heart charm under the sentiment.

————————–

Copic Markers

Guy
Skin: E04/E11/E21/E00/E000
Hair: W9/W7/W4/W3
Suit: C9/C7/C6/C4
Shirt: C3/C1/0
Tie: YG67/YG63/YG03

Girl
Skin: E04/E11/E21/E00/E000/R20
Hair: E39/E37/E35/E33/E31
Dress/Veil: B00/B000/0/Wink of Stella on Veil/Prismacolor White Pencil Crayon
Pink Flowers: R85/R83/R81
Yellow Flowers: E15/Y17/Y15/Y11
Purple Flowers: V09/V06/V04
Leaves: YG67/YG63/YG03

————————–

Card Recipe for The Perfect Day Card

After the Vows, Tiddly Inks Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Greenery Invitation 6” x 6” Paper Pad, Craft O’Clock
Your Perfect Day Stamp Set, Stampin’ Up!
Sunshine Wishes Thinlits Dies, Stampin’ Up!
Love Notes Framelits Dies, Stampin’ Up!
Meadow Dies, Stampin’ Up!
VersaMark Ink, Tsukineko
Silver Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
1 ½” Lace Ribbon, Celebrate It, Michaels Arts & Crafts
White Heart Lace Doily, Celebrate It, Michaels Arts & Crafts
Heart Charms, Stampin’ Up!
Rhinestone Stickers, Craft Dollarama
Clear Wink of Stella, Stampin’ Up!
Prismacolor White Pencil Crayon
Powder Pink and Mossy Meadow Cardstock

Finished card size: 5 ½” x 5 ½”

————————–

To view my other Copic Marker cards, please click here.

Hope you like my card using the digital stamp After the Vows by Tiddly Inks Stamps.

Thank you for stopping by!

Hugs,
Laurie

My Happy Couple Card

July 19, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here! I am sharing My Happy Couple Card using the digital stamp Wedding Couple by Krista Smith Stamps. This past weekend we had a wedding in our family, and this was the card I made for the happy couple to celebrate them!

The Details of My Card

I made a bridal shower card for the bride a few months ago and based my colouring on the couple getting married. They both loved the card (I will post it at the end)! So, I decided to do the same thing and colour these two cuties the same way. I went with green for the guy’s suit since I knew he would be wearing green. White Gelly Roll Pen was added to their eyes to make them sparkle and the girl’s lips to make them glossy. I added Glossy Accents to the Champagne glasses to make them shine. Clear Wink of Stella was added to the lace trim of the bride’s dress to make it sparkle.

Since I knew that their flowers were going to be wildflowers, I again went with the Dainty Flowers Designer Series Paper and matching Dainty Delight Dies like I did with the shower card.

I knew that I wanted to use the arbour frame with a shimmery white card stock, but with my coloured couple in the centre rather than the generic bride and groom shadows that came in the frame. So, I used my paper snips to cut the shadows out.

The sentiment was stamped in VersaMark ink and heat embossed with gold embossing powder to match all the gold accents including the frame around the arbour piece, the gold dots, and the strip of gold under the sentiment. I used my Paper Snips to add an angle to the sentiment piece.

A scattering of heart shaped pearls around the sentiment, along with the wooden heart embellishment, added to my theme of love.

————————–

Copic Markers

Guy
Skin: E04/E11/E21/E00/E000
Hair: E18/E08/YR18/YR14
Suit: G99/G94/G21
Shirt: C3/C1/0
Eyes: B18/B16/B12/B01/C3/C1/0

Girl
Skin: E04/E11/E21/E00/E000/R20
Hair: E35/E53/Y21
Dress/Veil: C3/C1/0/Wink of Stella on Lace Trim
Eyes: E59/E57/E55/C3/C1/0
Lips: R83/R81

Champagne: E50/Y21/Y26
Champagne Glasses: C3/C1/C0/B00/0/Glossy Accents
Green Showing Through Glasses: YG11

————————–

Card Recipe for My Happy Couple Card

Wedding Couple, Krista Smith Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Shimmery White Card Stock, From My Stash
Dainty Flowers Designer Series Paper, Stampin’ Up!
Dainty Delight Dies, Stampin’ Up!
Wedding Vows Frame Die, Cheery Lynn Designs
Happiness Abounds Stamp Set, Stampin’ Up!
VersaMark Ink, Tsukineko
Gold Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
White Gelly Roll Pen
Glossy Accents Ranger
Clear Wink of Stella, Stampin’ Up!
Gold Glitter Enamel Dots, Stamin’ Up!
Heart Pearls, Stampin’ Up!
Sending Love Embellishments, Stampin’ Up!
Paper Snips

Finished card size: 6 ½” x 5”

————————–

To view my other Copic Marker cards, please click here.

To view My Bridal Shower Card using the digital stamp Engagement by Krista Smith Stamps, please click here or on the photo.

A bridal shower card with a couple on it — My Bridal Shower Card

Hope you like my card using the digital stamp Wedding Couple by Krista Smith Stamps.

Thank you for stopping by!

Hugs,
Laurie

Magic in the Air Card

June 22, 2023 Leave a comment

A Card with a Fairy Sitting on a mushroom — Magic in the Air Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Magic in the Air Card as my Design Team Inspiration Card for Conie Fong Art & Design using Sitting Pretty on Mushroom. I coloured this beautiful image twice this month using the Kit and Clowder Whimsical Wonders Class as inspiration. This is my second card, but I will include a link to the other card at the end of this post.

The Details of My Card

For my card, I used the alternative colour choice from the Kit and Clowder class and gave her a sparkly dress using a White Gelly Roll Pen and lots of dots!

Two Fairies Coloured — My Colouring of Sitting Pretty on Mushroom

Once she was coloured, I pulled out some DSP with mushrooms on it to match her mushrooms. A mushroom border die in Poppy Parade also added to this theme.

Some greenery flourishes were added behind the sentiment and in the opposite corner for a splash of colour. I love how the swirls come from below to overlap the image adding depth and interest.

The sentiment was from Rosabelle by Kraftin’ Kimmie Stamps. Perfect sentiment for a fairy, don’t you think?

I brushes some Vintage Photo ink to the edges of the image, sentiment and DSP to give it an earthy feel to match the distressing in places on the Pool Party piece of DSP.

I added for embellishments brass butterflies beside the sentiment and fairy with red rhinestones in the other corner.

For shimmer, I added stickles to her wings! Every fairy should have sparkly wings!

————————–

Card Recipe for Magic in the Air Card:

Sitting Pretty on Mushroom, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Painted Seasons Designer Series Paper, Stampin’ Up!
Rosabelle, Kraftin’ Kimmie Stamps
VersaFine Ink Pad Onyx Black, Tsukineko
Mushroom Border Die, C.C. Designs
Elegant Flourish Small Die, Paper Roses
Brushes Brass Butterflies, Stampin’ Up!
Red Rhinestone Basic Jewels, Stampin’ Up!
Vintage Photo Distress Ink, Ranger
Blending Brushes, Stampin’ Up!
Star Dust Stickles, Ranger

Poppy Parade, Crumb Cake, Call Me Clover Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 5 ½”

————————–

This is the other card that I created using the Sitting Pretty on Mushroom. To view it, please click here or on the photo.

A birthday card with a fairy sitting on mushrooms — My Fairy Wishes Card

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Sitting Pretty on Mushroom for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

Have a Mice Day!

April 30, 2023 2 Comments

A card with a mouse holding a flowers and three daisy flowers beside her. — Have a Mice Day! Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Have a Mice Day! as my Design Team Inspiration Card for Conie Fong Art & Design using the Daisy Mouse And Hailey Hamster Bundle.

This Bundle includes 8 images:

Title 1: Daisy Mouse JPG format
Title 2: Hailey Hamster JPG format
Title 3 & 4: Daisy Flower Right JPG / PNG format
Title 5 & 6: Daisy Flower Left JPG / PNG format
Title 7 & 8: Have A Mice Day! Sentiment JPG / PNG format

The Details of My Card

For my card, I decided to create a CAS (Clean and Simple) card using Daisy Mouse and a bouquet of daisies. It’s funny that I find making CAS so hard. I keep wanting to add things to it! Lol!

I knew that I wanted to create a mini slimline card with Daisy on one side and the bouquet of daisies on the other side with the sentiment. Once I laid out my design in Microsoft Word, I coloured the images with my Copic Markers. I thought colouring the daisies in yellow would have them pop off the white paper.

For embellishments, I only added some epoxy stickers that look like dew drops on a petal of each flower. To add a bit of sparkle, I used Clear Wink of Stella on Daisy’s bow on her tail.

I felt the card still needed a little something and decided to use a multi liner pen and a ruler to draw in a border around the whole card. I thought about free handing it but decided that I didn’t want to chance ruining my project! Lol! So, in the end, I found the straight lines helped to ground Daisy while adding a fun element!

————————–

Copic Markers:

Daisy
Fur: E35/E34/E31/E30/R20
Bow/Nose: R85/R83/R81

Close Up of Mouse holding a flower — Close Up of Daisy Mouse

Daisies
Petals: E15/Y17/Y15/Y01
Leaves: YG17/YG13/TG03
Daisy Centres: E29/E27/E25/E23

Close Up the flowers on the card — Close Up of Daisies

————————–

Card Recipe for My Have a Mice Day! Card:

Daisy Mouse And Hailey Hamster Bundle, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Clear Epoxy Shapes, Stampin’ Up!
0.3 Multi Liner Pen, Copic
8” Cut-Align Ruler, My Sweet Petunia
Clear Wink of Stella, Stampin’ Up!
Microsoft Word/Printer
Rococo Rose Card Stock, Stampin’ Up!

Finished card size: 6” x 3 ½”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Daisy Mouse And Hailey Hamster Bundle for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

Best Wishes Birthday Card

January 12, 2023 Leave a comment

A Birthday Card with wisteria on it — Best Wishes Birthday Card

Hello Crafty Friends! Laurie here again! I am sharing my Best Wishes Birthday Card using the Wisteria Wishes Bundle by Stampin’ Up! For my card, I decided to create a birthday card, but this card could also be used for a wedding or an anniversary.

The Details of My Card

Wisteria comes in all different colours, but I just love wisteria in different tones of purples! So, it was a given that I would use Gorgeous Grape and Highland Heather for mine.

I decided to create several layers to build up to the wisteria focal point. The Brick & Mortar 3D Embossing Folder created a nice blank background while creating a bit of interest. The beautiful filigree die from the Fancy Frames Dies added to the delicateness of my wisteria and guided the eye to my focal point.

My wisteria needed a background to separate it from the filigree frame. So, the largest of the Tailor Made Tags was perfect. I die cut it twice using Basic White and the script sheet from the Vellum Layering Designs. I wanted the tag to be popped up and by adding the Basic White behind the vellum, it made it sturdy enough to do so.

Tip: to add glue to vellum so that you do not see it, use a Silicone Craft Sheet with a sponge and dab liquid glue onto the back.

A tip on how to apply liquid glue to vellum — Vellum and Liquid Glue Tip

The sentiment was heat embossed in white on a flag from the Stylish Shapes Dies.

For embellishments, I added some Linen Thread and a scattering of Opal Rounds.

Supplies:

Stamps/Bundles/Dies: Wisteria Wishes Bundle (158860), Fancy Frames Dies (159176), Tailor Made Tags Dies (155563), Stylish Shapes Dies (159183)

Inks: VersaMark Ink (102283)

Paper: Gorgeous Grape (146987), Highland Heather (146986), Old Olive (100702), Basic White (159276), Vellum Layering Designs (157764)

Accessories: Brick & Mortar 3D Embossing Folder (149643), Basics Embossing Powder (155554), Embossing Additions Tool Kit (159971), Heat Tool (129053), Opal Rounds (154289), Linen Thread (104199), Multipurpose Liquid Glue (110755), Silicone Craft Sheet (127853), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Gorgeous Grape (2 pieces):
- 5 ½” x 8 ½” scored at 4 ¼”
- Scrap
Basic White (2 pieces):
- 4” x 5 ¼”
- 1 ¾” x 3-7/8”
Highland Heather (2 pieces):
- 3” x 4 ½”
- Scrap
Old Olive (2 pieces):
- 3” x 2”
- 2-3/8” x 5/8”
Vellum Layering Designs:
- 1 ¾” x 3-7/8”

More Information on My Best Wishes Birthday Card:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

A Magical Ever After Card

September 21, 2022 Leave a comment

Hello Crafty Friends! It’s Laurie here! I am sharing A Magical Ever After Card using Magical Wedding by Paper Nest Dolls for my Design Team Inspiration Card.

The Details of My Card

Don’t you just love the mouse ears on these cuties! This stamp is so perfect for a magical wedding card! If you know anyone getting married at Disney, this stamp is for them!

I had fun colouring these cuties with my Copic markers. I decided to give the groom a light gray suit with darker trim on which I used Wink of Stella to give the trim a satin look. For the matching pops of red on the Bride and Groom, I used Star Dust Stickles to give them some sparkle. For the Bride, I went with the traditional white. The banner, I kept quite simple with white for the banner and white doves.

The background cathedral lace frame was perfect to set off these cuties! I popped it up from paper that had a Disney theme. You could use a more Disney themed piece, but I went with a black/white stripe with confetti on it. Very elegant!

I decided to add a cluster of embellishments at the bottom right side that consisted of some flowers, a black glimmer die cut Mickey balloon and a red glimmer die cut “love”. These all tied in the theme and colours perfectly! The only other embellishment was a scattering of rhinestones to add more sparkle.

————————–

Copic Markers:

Groom
Skin: E000/E00/E21/E11/E04
Hair: E57/E43/E53
Suit: C5/C4/C2/C2
Suit Trim: C9/C7/C6/Clear Wink of Stella
Ears/Shoes: C9/C7/C6/C4
Reds: R39/R37/R35/R32/Star Dust Stickles

Bride
Skin: E000/E00/E21/E11/E04/R20
Hair: E49/E47/E44/E43/E42
Dress/Veil/Shoes: C3/C1/0
Ears: C9/C7/C6/C4
Reds: R39/R37/R35/R32/Star Dust Stickles
Bouquet: R39/R37/R35/R32/C3/C1//0/Y17/Y15/Y11/YG67/YG03

Banner
Just Married Part: C3/C1/0
Birds: C3/C1/0/YR04/YR02/YR01

————————–

Card Recipe for A Magical Ever After Card:

Magical Wedding, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Value Pack Cards & Envelopes by Recollections, 5” x 6 ½”, Michaels
Magical Adventure 2, 6 x 6 Paper Pad, Echo Park Paper Co.
Doily Die-Cathedral Lace Frame, Cheery Lynn
Magical Balloons Dies, Stamp AnnieThing
Sunshine Wishes Thinlits Dies, Stampin’ Up!
Real Red Glimmer Paper, Stampin’ Up!
Black Glimmer Paper, Stampin’ Up!
Rhinestone Basic Jewels, Stampin’ Up!
Mini Paper Flower Embellishments, Recollections, Michaels Arts & Crafts
Star Dust Stickles, Ranger
Clear Wink of Stella, Stampin’ Up!
Brother Scan & Cut
Real Red Card Stock, Stampin’ Up!

Finished card size: 5” x 6 ½”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team card using
Magical Wedding by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

My Summer Dreams Card

August 14, 2021 Leave a comment

Hello Crafty Friends! It’s Laurie here! I can’t believe that Summer is almost over! So, in the hopes of making the summer last a little bit longer, I am sharing My Summer Dreams Card as my Design Team Card for Conie Fong Art & Design. My card is using the sweet Summer Dreams. This image would be perfect for so many occasions like Birthday, Mother’s Day, Thinking of You, Wedding to name just a few!

Details of My Card

For my card, I coloured this sweet image with my Copic markers to match the beautiful Botanical Tea paper by Graphic 45. I had a lot of fun colouring all those waves and curls in her hair and look at those pleats! Omgoodness! Such colouring fun!

I have been wanting for a while to use the Stitched Greenery Dies by Stampin’ Up! and thought that they would make a perfect subtle mat for my focal point. I die cut the Botanical Tea paper and my coloured image with the Labels Seventeen in two consecutive layering dies. I used my Blending Brush to add some Vintage Photo ink to the edges of all my paper and die cuts. Next, I turn the larger one on its side and punched two holes in it at one end and threaded ribbon through the holes for an unexpected touch.

To add to the botanical theme, I added a leaf trinket so that it looks like it is attached to the ribbon. I found a paper flower that matched my colouring perfectly. To add some matching blue embellishments, I coloured rhinestones with my B34 Copic markers and scattered them here and there.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: YR31/E33/E35/E37
Pinks: R81/R83/R85/R89
Blues: B34/B23/B32
Browns: E70/E71/E74/E77
Flowers: B34/B32/R85/R81/Y17
Stems: YG03/YG63/YG67/G99
Sky: BG000/BG0000
Rhinestones: B34

————————–

Card Recipe for My Summer Dreams Card:

Summer Dreams, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Botanical Tea Paper Pad, Graphic 45
Pink Buttons 6” x 6.5” Card Stock Paper, Recollections, Michaels Arts & Crafts
Nestabilities Labels Seventeen, Spellbinders
Stitched Greenery Dies, Stampin’ Up!
¼” Handheld Hole Punch, In my Stash
Marina Mist ¼” Cotton Ribbon, Stampin’ Up!
Tip Top Taupe Dotted Lace Trim, Stampin’ Up!
Bird Ballad Trinkets, Stampin’ Up!
Paper Flowers, Recollections, Michaels Arts & Crafts
Vintage Photo Distress Inks, Ranger
Blending Brushes, Stampin’ Up!
Basic Rhinestone Jewels, Stampin’ Up!
White Gelly Roll Pen
Marina Mist Card Stock, Stampin’ Up!

Finished card size: 5.75” x 5.75”

————————–

To view my other Conie Fong Art & Design cards, please click here.

Hope you like my Design Team Inspiration Card using
Summer Dreams for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

All Things Wedding Package

June 12, 2020 Leave a comment

Today I am sharing my All Things Wedding Package that I gave to one of my Carding Ladies who just got married. She asked me for a Thank you Card Kit that she could put together. This Package used something new, the Ornate Thanks Bundle from the new 2020/21 Annual Catalogue, something old, the retired Foral Boutique Designer Series Paper, and something blue, Night of Navy card stock. As soon as I saw her dress, I knew that I wanted to use the retired Floral Boutique Suite. So, I based my design on her gorgeous wedding dress.

In addition to the Thank You Card Kit, I included a wedding card from me that used that suite and tied it with some pretty White Glitter Ribbon.

My Wedding Card using the Floral Boutique Suite

I also made my own envelope using the Foral Boutique DSP.

My Custom Envelope, Wedding Card and Thank You Card

I packaged it all up in a tin from the Bird Ballad Laser Cut Cards and Tin and tied it all together with the same White Glitter Ribbon. You can never have too much glitter!

Inside of My All Things Wedding Package — Inside My All Things Wedding Package

My All Things Wedding Package Ready to Go

Supplies:

Stamps: Ornate Thanks Stamp Set (149471), Floral Phases Stamp Set (retired)

Inks: Night Of Navy Classic Stampin’ Pad (147110)

Paper: Night Of Navy (100867), Whisper White (100730), Floral Boutique Designer Series Paper (retired)

Accessories: Ornate Layers Dies (152726), Detailed Floral Thinlits (retired), Silver 3/8″ Metallic-Edge Ribbon (144213), Bone Folder (102300), Paper Snips (103579), Rhinestone Basic Jewels (144220), SNAIL Adhesive (104332), Stampin’ Dimensionals (104430)

Measurements:

Night Of Navy: 8 ½” x 5 ½”; scored at 4 ¼”
- 5” x 2”
Floral Boutique Designer Series Paper: 4” x 5 ¼”
Whisper White:
- 1 ¼” x 4 ¼” (for sentiment)
- 5 ½” x 2 ½”
- 4” x 5 ¼” (inside card)
Silver 3/8″ Metallic-Edge Ribbon: 2 pieces at 4”

Instructions:

Fold the Night Of Navy card stock in half to create the card base.
Stamp the sentiment on the Whisper White card stock in Night of Navy.
Die cut the sentiment out with the stitched die from the Ornate Layers Dies.
Die cut the Night of Navy card stock with the die that frames the sentiment piece.
Using the second largest piece of Whisper White, die cut it with the scallop frame that will layer the Night of Navy piece.
Adhere the DSP to the Night of Navy card base with SNAIL.
Wrap the Silver Metallic-Edge Ribbon around each end of the scalloped piece and adhere with SNAIL to the card base.
Using SNAIL, adhere the sentiment to the Night of Navy frame.
Attached the Night of Navy frame with dimensionals centered on the scalloped piece.
Add three Rhinestones to the card.

For Further Info:

Hope you like my All Things Wedding Package!

You will find the items listed above in my online store at: https://www.stampinup.com/ecweb/product/152726/ornate-layers-dies?dbwsdemoid=2103981.