Hello Crafty Friends! Laurie here again! I am sharing my Autumn Wishes Alternative Cards using the Autumn Abundance September 2024 Paper Pumpkin Kit by Stampin’ Up! Since this weekend is our Canadian Thanksgiving, I decided to create two alternative cards for the holiday!
But, first, here are the three cards that the kit makes. Perfect for this time of year!
Autumn Abundance September 2024 Paper Pumpkin Kit
The Details of My Autumn Wishes Alternative Cards
My Hey Pumpkin Card
For my first alternative card, I decided to do some colouring with my Stampin’ Blends using the girl with the pumpkins from the Warms My Heart Stamp Set. I thought she would suit my autumnal theme very well!
My Hey Pumpkin Card
I used the front half of the smaller leaves card to create a focal point for my girl. To separate her from the Leaf Fall 3D Embossing Folder that I used for the Wild Wheat background, I added a Cajun Craze die cut circle using the Spotlight on Nature Dies.
Next, I added the bronze foil leaf in the kit and two more leaves for which I used the add-on Every Celebration Dies. For embellishments, I added three Faux Glass Dots that matched my colour scheme.
Measurements:
Basic White Card Base:
8 ½” x 4 ¼”
3” x 2 ¼” (to stamp girl)
Wild Wheat:
5 ¼” x 4”
Scrap for leaf
Cajun Craze:
2-1/8” x 2-1/8”
Scrap for leaf
Kit Leaves Card Front:
4” x 4”
Other Pieces from Kit:
Bronze Leaf
Sentiment
My Triple Panel Card
For my second alternative card using the Autumn Abundance September 2024 Paper Pumpkin Kit, I made a triple panel card.
Since I had leftover the back of the smaller card, I used it for the front of this card. For the front panel, I die cut a Poppy Parade circle using the Spotlight on Nature Dies to layer behind my sentiment. I added some Linen Thread tied into a bow for my embellishment.
I made the Cajun Craze mat a little longer and scored it to create a tab that I tucked in behind the log DSP.
My Triple Panel Card
For the middle panel, I used the front of the log card base and then added a sentiment with stamped off leaves in Cajun Craze, Wild Wheat and Poppy Parade.
Panel 2 of My Triple Panel Card
Since I planned to send this card to my family for Thanksgiving, I wanted the final panel to say, “Happy Thanksgiving” and the sentiments from The Gift of Fall August 2019 Paper Pumpkin Kit were perfect for my card! They were stamped in Cajun Craze and Poppy Parade. One final leaf was stamped in Wild Wheat beside the sentiment.
Final Panel of My Triple Panel Card
Measurements:
Cajun Craze:
8 ½” x 4 ¼”
4 ¼” x 6” with score mark at 4 ¼” (tuck tab behind log DSP)
3 ½” x 3 ½”
Basic White:
3 ¼” x 3 ¼”
4” x 5 ¼”
Kit Leaves Card Front:
4” x 4”
Kit Log Card Front:
4” x 5 ¼”
Other Pieces from Kit:
Snail
Log
Mushroom
Leaves
Cajun Craze Strip
Sentiment
More Information on My Autumn Wishes Alternative Cards
For more of my Stampin’ Up! paper Pumpkin cards, please click here.
You will find the items listed above in my online store
Hello Crafty Friends! Laurie here again! I am sharing my Time for Cake Alternative Cards using the August Time for Cake Paper Pumpkin Kit by Stampin’ Up! I created three alternative cards using the Kit. Two fun folds and a regular card. But, first, here are the three cards that the kit makes. Perfect for those birthday cards that everyone needs!
Cards from the August Time for Cake Paper Pumpkin Kit
The Details of My Time for Cake Alternative Cards
Make a Wish Card
Make a Wish Card
For my first alternative card, I decided to create a Thick Basic White card base with the floral Night of Navy card base adhered to it. I trimmed down the candles DSP to fit on my card front and added a Pretty in Pink mat to one side.
Close Up of Focal Point
I couldn’t resist cutting apart one of the Pretty in Pink envelopes to use as a strip on my card! I turned the tag over to stamp on the white side and added a candle over the hole to hide it. The other sentiment was stamped on the Pretty in Pink piece from the cake card. Finally, I added some Rhinestone Jewels to the candle flames for sparkle.
Measurements:
Basic White Card Base:
8 ½” x 4 ¼”
Pretty In Pink Mat:
2” x 4”
Candle DSP:
3” x 3 ¾”
Envelope DSP:
2” x 4 ½”
Other Pieces from Kit:
Floral Night of Navy
Tag
Pretty in Pink Sentiment Strip
Candle
Triple Fold Bridge Card
For my second alternative card using the Time for Cake August 2024 Paper Pumpkin, I made a triple fold bridge card! Love the free stamp set with the numbers! Perfect for those special milestone birthdays!
Triple Fold Bridge Card
I took the Petal Pink card base and cut 1” on either side up to the card fold to create three panels.
For the front, I used part of the candle DSP and stamped 80th on it from the free stamp set. This was matted with Night of Navy and then a strip of Pretty in Pink was added to make sure that this bridge was securely in place.
Close Up of Focal Point
Next, I stamped the Happy birthday sentiment on the banner. To make the banner stand out from the white in the background, I sponged Pretty in Pink onto the edges. The Hooray was die cut from some Rose Gold Foil that I had from another project. The finishing touch was some Rhinestone Jewels to the candle flames for sparkle.
Inside Panel of Card
Now that the front was decorated, it was time to decorate the inside panel. I used half of the balloon DSP from the Kit and matted it with Night of Navy. Since the balloons had a white space in the centre, it was the perfect place to add my sentiment. I love that the sides of inside layer of the card can be seen before you open it!
Inside of Card
For the inside of the card, I used strips of the envelope DSP from the previous card to add borders to a Basic White piece. These were both matted with Night of Navy. The sentiment was stamped, and a candle added.
Measurements:
Card Base:
From Kit
Pretty In Pink Mat:
3 ¼” x 4 ½”
Night of Navy Mats:
4” x 3 ¾” (Front)
3 ½” x 2 ½” (Balloon Piece)
4”x 5 ¼” (Inside)
Candle DSP:
3 ¾” x 3 ½”
Balloon DSP:
3 ¼” x 2 ¼”
Envelope DSP (2):
3 5/8” x ¾”
Basic White (Inside):
3 ¾” x 5”
Other Pieces from Kit:
Banner
Pretty in Pink Sentiment Strip
Candle
Pop-up Box Card
Here is my last alternative card using the Time for Cake August 2024 Paper Pumpkin, I made a fun pop-up box card that is sure to impress!
Pop-up Box Card
For my card, I thought it would be fun to have the balloons suspended over a box! To make my card, I used a lot of bits from the different cards and envelopes, but it was well worth it!
So, I created the box according to the measurements below and added the tabs for the balloons on the inside. Note: adhere the tabs to one side of box. Then, adhere to the other side of tabs and box tab. Fold flat and tuck in the tabs so that they adhere to the other side of box.
I used the Candle DSP to decorate the top flaps. For the front flap, I added the banner and two candles. Unfortunately, the banner does stick out when the card is folded down. So, I had to use a larger envelope for it.
View of the Balloons
Next, I used pieces of an envelope to decorate the outside of the box. You could decorate the top outside flaps too, but I decided not to since I didn’t want to use another envelope.
The balloon DSP was left over from the other card, and I trimmed it down to fit.
Top View
For the balloons, I used a thin strip of Window Sheet that I adhered to the balloons and to the tabs. I made sure to hold them in place while the glue set. I placed the larger balloon at the back with the smaller ones at a slight angle in front of it. Note: make sure that when the card is closed that the balloons do not extend above the card top or sides.
Back View
The final piece was the stamped Basic White piece for the message.
Measurements:
Card Base:
5 ½” x 8 ½”:
Score at 2”, 4” 6” 8” along 8 ½” side
Score down middle at 2 ¾” of 5 ½” side
Cut each score mark until reach middle score mark (2 ¾”)
Cut off the narrow tab at 2 ¾” and trim at angle the remaining piece
Tabs (2):
¾” x 3 ¼”
Score at 5/8” on both sides
Candle DSP:
2 ½” x 1-7/8” (3 pieces)
Envelope DSP:
2 ½” x 1-7/8” (3 pieces)
Balloon DSP:
3 ¼” x 1-7/8”
Basic White (Sentiment):
5 ¼” x 1 ¾”
Window Sheet: 1 ½” X ½” (3 pieces)
Other Pieces from Kit:
Banner
Candle
Hooray
Balloons
More Information on My Time for Cake Alternative Cards
For more of my Stampin’ Up! Paper Pumpkin cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Painted Petals Alternative Card using the July Painted Petals Paper Pumpkin Kit by Stampin’ Up! I created some alternative cards using the Kit and shared three of them the other day (will include a link to the post at the end). So, I thought I would share this fun fold alternative card today. But, first, here are the three cards that the kit makes. They are so pretty!
Three Cards from the Kit
The Details of My Painted Petal Alternative Card
For my last alternative card, there was a fun fold that I wanted to try, and I thought this kit would be perfect for it especially with those die cut flowers! So, I used the Melon Mambo card base and one of the matching envelopes. I kept the extra products down as much as possible by only adding card stock.
Card Front
I love how when it’s folded down you can’t see all the layers, but as you open it, the layers keep on going! And there is a hidden card at the end that you don’t expect! How cool is that!
Small Inside Card Opened
I trimmed the Melon Mambo card base from the Kit in half separating the back from the front. For the front of the card base, I cut it in half and then trimmed it to 1 ½” so that I could have as much of the flowers showing as possible. Then, I trimmed the top and bottom to make these panels 5” tall.
Once that was done, I used the back of the card base for all the other smaller panels.
For the card inside, I used the envelope and trimmed it down to show only the flowers.
Inside of Card Laid Flat
I adhered all these pieces to the Melon Mambo mats and then adhered them to the Basic White card base. The floral die cut fitted perfectly on the front. I stamped two sentiments and adhered one to the front and one to the inside of the smaller card. For the inside of the smaller card, I added the Melon Mambo strip from the kit under the sentiment.
The finishing touch was adding three of the sequins that came in the kit to the front.
Close Up of Card Front
Measurements of My Painted Petals Alternative Card:
Card Base:
12” x 5 ½” cut/scored according to template below
4 ¼” x 6 ½” (for inside card)
Mats:
1” x 1 ¾” (4 pieces)
5 ¼” x 3 ¾” (2 pieces)
5 ¼” x 3 ¾”
4 ¼” x 3-1/8” (for inside card)
1st DSP:
5” x 1 ½” (2 pieces)
2 ½” x 1 ½” (2 pieces)
2nd DSP:
¾” x 1 ½” (4 pieces)
4” x 3” (for inside card)
More Information on My Painted Petals Alternative Card
Downloadable Creative Fold Card Template
To download a PDF of the Creative Fold Card Template, please click here.
Creative Fold Template
Here are the other alternatives cards that I have made with this Kit. They are centre-step cards. For more information on them, please click here.
Side View of Cards
For more of my Paper Pumpkin Alternative cards, please click here.
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Painted Petals Centre-Step Cards using the July Painted Petals Paper Pumpkin Kit by Stampin’ Up! When I saw this kit, I was in love with it, especially how the die cuts all layer on top of the card fronts! So many ideas came flooding into my head! Lol! In fact, I created five alternative cards using the Kit. But, first, here are the three cards that the kit makes. They are so pretty!
Three Cards from the Kit
The Details of My Painted Petal Centre-Step Cards
For my three alternative cards, I decided to use my favourite fun fold, a centre-step! I kept the extra products down as much as possible by only adding card stock and the Eyelet 3D Embossing Folder.
For the rose flower card, I decided to use the Eyelet 3D Embossing Folder for the various strips to add some interested. I also decided to use the Old Olive card backing from one of the cards instead of the matching card front for variation.
Rose Centre-Step Card
For the daisy flower card, I had some of the Old Olive card backing from the previous card. So, I used it for the two side strips. The bottom strip was left over from the front of the card when I trimmed it down. I love that you can see the splotches on it! I decided to use the matching card front for the centre panel and layered the die cut on top of this panel.
Daisy Centre-Step Card
For the poppy flower card, I used all the bits from the card base. Since the poppy die cut was longer than the others, I decided not to trim down the centre panel as much, leaving the sides of the bottom panel free for the sentiment on one side and the embellishments on the other.
Poppy Centre-Step Card
Measurements of My Painted Petals Centre-Step Cards:
Card Base:
11″ x 4 ¼” cut/scored according to template below
Centre Panel:
2-1/8″ x 4-3/8″
2 Side Strips:
7/8″ x 4-3/8″
Bottom Strip:
7/8″ x 4-1/8″
Side View of Cards
More Information on My Painted Petals Centre-Step Cards
Stay tune for my other alternative cards using this kit. I made two more fun folds cards, but different than these ones.
Downloadable Centre-Step Card Template
To download a PDF of the Centre-Step Card Template, please click here or on the picture.
Centre-Step Card Template
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Best Father’s Day Card using The Best There Is May 2024 Paper Pumpkin by Stampin’ Up!
The Details of My Alternative Cards
I had so much fun playing with the kit that I made the 3 cards in the kit. This kit’s wood grain textured designs are perfect for making masculine and all-occasion cards.
Cards in The Best There Is May 2024 Paper Pumpkin
In addition to them, I also made 6 alternative cards that included 3 thank you cards, a sympathy card, a birthday card and a Father’s Day card. For 4 of the cards, I also use the Add-on Thanks & Beyond Dies. Please see them below.
My Alternative Cards
The Details of My Best Father’s Day Card
For my final two cards, I thought I would go into more in-depth details. I decided to create a Flippy Fun Fold card that was sure to wow! I made a Father’s Day card using the stamp in the kit and a birthday card using the Throughout the Year Stamp Set.
Best Father’s Day Card
The largest of the circles from the Stylish Shaped Dies fitted the preprinted tree circle perfectly with a nice border! So, I die cut the circle from the Misty Moonlight card base towards the top to leave enough space for my sentiment. Next, I die cut a circle from Early Espresso on which I mounted the preprinted tree circle.
Inside of My Best Father’s Day Card
For my inside, I cut and scored a Basic Beige card base according to the instructions below. I adhered this card base to the Misty Moonlight card base with the larger panel at the back and the smaller tab panel at the front. Note: make sure you only add glue to the top and bottom of the small tab panel. You will see the smaller tab panel showing through the die cut circle. Using my Paper Snips, I cut where the small tab panel over lapped the circle on the front and adhered that to the back of the larger panel thus hiding it.
Inside of Card Flat
Next, I decorated the inside with the striped paper and the Early Espresso mats. For the Basic White panel, I stamped in Early Espresso the trees that came in the Kit to match the trees on the preprinted circle and then matted it with the Early Espresso mat.
Once the inside was done, I closed my card, added glue to only the part of the panel that can be seen through the die cut circle and adhered the Early Espresso circle in place.
Inside of Card Standing Up
Finally, I added a couple of strips to my sentiment piece to tie in the inside papers and to balance out my circle focal point.
The finishing touch was to add some Adhesive-Backed Textured Dots to my card.
Supplies:
Stamps/Bundles/Dies: The Best There Is Paper Pumpkin Refill Kit (165001), Throughout the Year Stamp Set (162312), Thanks & Beyond Dies (164397), Stylish Shapes Dies (159183)
Inks: Misty Moonlight Classic Stampin’ Pad (in Kit), Early Espresso Classic Stampin’ Pad (147114)
Paper: Basic White (159276), Early Espresso (119686), The Best There Is Paper Pumpkin Refill Kit (165001)
Accessories: Adhesive-Backed Textured Dots (163338), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)
Fop View of Card Showing Inside Folds
Measurements:
Misty Moonlight Card Base (from Kit):
8 ½” x 5 ½” scored at 4 ¼”
Basic Beige Card Base (from Kit):
6-7/8 x 5 ½” scored at 2-1/8”, 4 ¼” and 6-3/8”
Basic White:
1-5/8” x 5”
Early Espresso:
1-7/8” x 5 ¼” (3 pieces)
3 ¼” x 3 ¼”
The Best There Is Paper Pumpkin Refill Kit:
1-5/8” x 5” (Stripe Paper – 2 pieces)
½” x 3” (Basic Beige Strip from Card Base)
¼” x 3 ½” (Stripe Paper)
Preprinted Tree Circle
More Information on My Best Father’s Day Card
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store
Hello Crafty Friends! Laurie here again! I am sharing my alternative Fancy Fold Step Card using the March 2024Memorable Meadows Paper Pumpkin. I have made this fun fold several times for different recipients, and it’s always Wowed them!
This Kit makes 9 cards of which I made three. I always like to make one set of the cards in the kit and then play with it to see what alternatives I can design.
Cards from March 2024 Memorable Meadows Paper Pumpkin Kit
I made a total of nine cards with six being alternatives. I had a lot of fun playing with this kit! My alternatives included a bridge card, a faux-centre step card, a z-fold card, a fancy fold step card and two others.
My Other Alternative Cards
The Details of My Fancy Fold Step Card
For this fun-fold card, I used 3 card bases front and back from the Paper Pumpkin Kit. I loved that the card bases were printed with a continual scene from front to back! With some careful measuring, this made it easy to create my card.
Front of Card
To decorate the front of my card, I used the arch from the Garden Meadow Dies and one of the sheets from the Meandering Meadows 6” x 6” Designer Series Paper that had some Daffodil Delight on it. I knew I wanted to use the daffodil die from The Love of Spring Dies to decorate my inside. So, I wanted to bring this colour throughout my card. The Radiating Stitches Die was a perfect backdrop for my arched focal point!
Front of My Card
I used the Adhesive-backed iridescent embellishments, the wooden tree, and some Adhesive-Backed Dragonflies & Birds to decorate my card front.
Inside of card
For the larger panels, I used the same card base for the panels that when folded are side by side. For example, I used the larger tree card base for the two front panels that are shown when the card is close. Then, I used the smaller panoramic card base for the two large inside panels. I trimmed the left and right card base sides at 2 ½” wide making sure I used the matching panels when they were adhered. I saved the scored pieces for the large squares. Luckily, the decorations hid the score lines well.
First Opening of Inside of Card
Next, I used the daisy card base for six of the small squares. I did not mat these since the squares are already so small. Again, I made sure to cut them so that they matched when laid down in a row. The centre square was left over from the scraps.
Second Opening of Inside of Card
To decorate my card, I stamped the sentiments in Garden Green on the different precut pieces with gold foil. I layered the leaves and daffodils behind the two inside my card using the vellum pieces that come in the kit to accent them.
Third Opening of Inside of Card
More adhesive-backed iridescent embellishments, Adhesive-Backed Dragonflies & Birds and two Paper Butterfly Accents were used to decorate the inside.
Card Fully Opened
Supplies:
Stamps/Dies/Bundles: March 2024Memorable Meadows Paper Pumpkin, The Love of Spring Dies (164396), Garden Meadow Dies (162740), Radiating Stitches Dies (161595)
Inks: Garden Green Spot (In Kit)
Paper: Gorgeous Grape (146987), Fresh Freesia (155613), Basic White (159276), Old Olive (100702), Mossy Meadow (133676), Daffodil Delight (119683), Meandering Meadows 6” x 6” Designer Series Paper (162735)
Accessories: Adhesive-backed iridescent embellishments (in Kit), Pressed wood embellishments (in Kit), Adhesive-Backed Dragonflies & Birds (162743), Paper Butterfly Accents (162612), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Stampin’ Seal (152813), Mini Glue Dots (In Kit)
Top View of Card
Measurements:
Gorgeous Grape cut/scored according to template below (3 pieces):
7 ¾” x 6” (2 pieces)
10” x 6”
Fresh Freesia: (6 pieces)
2 ¾” x 5 ¾” (4 pieces)
3 ¾” x 3 ¾” (2 pieces)
Basic White:
4” x 5 ½”
Old Olive:
Scraps for leaves (2 pieces)
Mossy Meadow:
Scraps for leaves (2 pieces)
Daffodil Delight:
Scraps for flowers (2 pieces)
Meandering Meadows 6″ x 6″ Designer Series Paper:
3” x 4 ½” (for arch on front of card)
Memorable Meadows Paper Pumpkin:
2 ½” x 5 ½” (4 pieces)
3 ½” x 3 ½” (2 pieces)
1 ¾” x 1 ¾” (7 pieces)
Collage of Different Layers
More Information on My Fancy Fold Step Card
Here is a video of my card in action.
Fancy Fold Step Card Instructions & Template
To download a PDF of the Fancy Fold Step Card Instructions & Template, please click here or on the picture.
Fancy Fold Step Card Instructions & Template
Finished card size: 6” x 6”
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Home for the Holidays Alternatives using the Home for the Holidays Paper October 2023 Pumpkin Kit by Stampin’ Up! When I saw this kit, I knew that I wanted to make some alternative cards! In fact, I had so much fun that I made 5 of them! Lol! I went into detail for two of them and have posted the others along with a downloadable Faux-Step Template at the end of this post.
The Details of My Home for the Holidays Alternatives
For my cards, I thought a faux-step card would be perfect way to use the detailed pre-cut village scenes! Plus, it allowed me to move the faux step to where I thought it worked best on each card!
So, I cut one of the card bases from the Paper Pumpkin Kit creating a 3” piece and a 2 ½” piece. Thus, allowing me to make two cards from this one card base! Next, I used my Paper Trimmer to cut a Thick Basic White and a Night of Navy card bases using the template at the end of this post for measurements.
Basic White Alternative Card
For the Basic White card, I used the back of an envelope from the Warm Wishes Cards & Envelopes to cut a piece of the red diagonal stripes for behind my scene. I love how it makes the scene pop! Next, I placed the faux step in the centre since you can see the trees on it through the village.
Basic White Alternative Card
The rest of the card was built according to the placement in the instructions. I just made sure that the dimensionals for the village were on the narrow band at the bottom and my sentiment was attached to the faux step.
Side View of First Card
Night of Navy Alternative Card
For my Night of Navy card, I used one of the cards from the 5” x 7” Warm Wishes Cards & Envelopes. I love that the night scene continues onto the back of the cards! This allowed me to cut a 5-3/8” piece of the night sky with the trees making sure that I did not include the moon in my piece (we did not need two moons on the final card! Lol!). However, this left a scored line on my final card. So, to cover the score line, I placed the faux step to the right. It also helped to balance out the smaller pre-cut village that I used.
In addition to this, I added a strip of snow from my cut-up Warm Wishes Card on the final card base under my village.
Night of Navy Alternative Card
Since the smaller pre-cut village ended short on my card, I decided to place the glittery strip and stamped sentiment to the left covering the void. I used my paper snips to trim them down.
Side View of Second Card
The final thing was to add the glitter glue that came in the Kit to the snowy villages for both cards.
Supplies:
Stamps/Bundles/Dies: Home for the Holidays Paper Pumpkin Refill (163969)
Inks: Real Red Spot (in Kit)
Paper: Thick Basic White (159229), Night of Navy (100867), Warm Wishes Cards & Envelopes (163985)
Accessories: Paper Trimmer (152392), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Stampin’ Seal (152813), Mini Glue Dots (In Kit)
Measurements:
Thick Basic White/Night of Navy Card Bases:
8 ½” x 5 ½” cut/scored according to template below
Home for the Holidays (1 card):
3” vertical cut and folded (leaving 2 ½” piece for other card)
Warm Wishes Cards & Envelopes:
5-3/8” x 3” (2 pieces – one envelope and one card)
5 ½” x 1” (strip of snow)
More Information on My Home for the Holidays Alternatives
Downloadable Faux Centre-Step Template
To download a PDF of the Faux Centre-Step Template, please click here or on the picture.
Downloadable Faux Centre-Step Template
These are three other alternative cards that I made using the Paper Pumpkin Kit and the matching Warm Wishes Cards and Envelopes.
Other My Home for the Holidays Alternatives
Bridge Card Instructions
Card base cut at 1-1/8” from either end leaving 3 ¼” centre piece. Inside diagonal red pieces are from a Warm Wishes Envelope and measure 4” x 1”.
Triple Layer Alternative Bridge Card
Easel Card Instructions
I made the card according to the kit’s instructions, but I scored a fold into the card base at 1-1/2” up from the bottom. I used a 1/2” x 5 1/4″ strip of sky from a card from the Warm Wishes Cards for a ledge for my houses to rest against.
Alternative Easel Card
Box Card Instructions
I used back of a card base and a piece of Warm Wishes Card measuring at at 5 1/2” x 4 1/4” scored both pieces at 1/2”, 1” on each horizontal side for both pieces. For centre scene inside card, I cut front of one card 3 1/8” x 4 1/4” tall.
Alternative Box Card
More of my alternative Paper Pumpkin cards, please click here.
Hello Crafty Friends! Laurie here again! I am sharing my alternative Tri-Fold Shutter Card using the May 2023 Exploring In Color Paper Pumpkin Kit. I made one of these for Father’s Day (I will post it at the end) using the same kit but using a different card. It was a huge hit! So, I thought I would make one as a birthday card for a teenager who loves to camp!
The Details of My Card
For my fun-fold card, I used a full card base front and back from the Paper Pumpkin Kit. Loved that the card bases were printed with a continual scene from front to back! Therefore, with some careful measuring, this made it easy to create my card!
Front of Card Folded To A2 Card Size
Since the PP card base is 5 ½” tall (same as my card base), I trimmed ¼” off top and bottom to make it fit onto my card base with mats. I didn’t mat the two centre scene strips since they were so thin already. They also have the fold from the PP card base in them, but you really don’t notice it.
Next, the stamped images were from the stamp set that came in the kit. I made the boots look like they were walking. Lol! Since the stamped pieces filled the space so nicely, I didn’t need to mat them.
Card Laid Flat
Finally, the only things that I added to my card was the card base, some In Color card stock and Adhesive-Backed Solid Gems. The linen thread, binoculars and sentiment pieces were all from the kit.
Supplies:
Stamps: May 2023 Exploring In Color Paper Pumpkin Kit, Gone Fishing Stamp Set (For Father’s Day Card) (161535)
Inks: Copper Clay Spot (In Kit)
Paper: Very Vanilla 12” x 12” Cardstock (144239), Copper Clay (161721), Boho Blue (161724), Wild Wheat (161725), Pebbled Path (161722)
Accessories: Adhesive-Backed Solid Gems (161300), Rustic Metallic Adhesive-Backed Dots (For Father’s Day Card) (159082), Linen Thread (In Kit), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Stampin’ Seal (152813), Mini Glue Dots (In Kit)
Measurements:
Very Vanilla:
12” x 5 ½” (cut/scored according to template below
Copper Clay: (3 pieces)
1 ¾” x 5 ¼” (2 pieces)
2” x 3 ½”
Boho Blue:
2 ¼” x 1 ¾” (2 pieces)
2 ¼” x 3 ¾”
Wild Wheat:
1 ¼” x 1 ¾” (2 pieces)
Pebbled Path (3 pieces):
1 ¼” x 1 ¾” (2 pieces)
Card Pieces:
1” x 5” (2 pieces) (long vertical pieces)
1 ¼” x 3 ¾” (2 pieces) (long horizontal pieces)
2” x 1 ½” (2 pieces)
More Information on My Tri-Fold Shutter Card
Lastly, here is my Father’s Day Card using the May Exploring In Color Paper Pumpkin Kit. Same measurements as above, but a Basic White card base, different Paper Pumpkin card from the kit and Rustic Metallic Adhesive-Backed Dots. The sentiment is from the Gone Fishing Stamp Set.
My Father’s Day Card
Downloadable Tri-Fold Shutter CardTemplate
To download a PDF of the Tri-Fold Shutter Template, please click here or on the picture.
Tri-Fold Shutter Template
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing A Toast for Your Birthday! using the Lots of Pun Paper Pumpkin Past Kit. I had so much fun playing with this Paper Pumpkin Kit! I made some alternative cards (see at end of post for photos) when it was first released in January, but I had some leftover bits and decided to make a fun fold card. The only things I added was some card stock, adhesive and a toast sentiment! Everything else is from the kit.
Video of Pop & Twist Card in Action
This card is for a 12-year-old boy whose birthday is today! Every year I create an interactive card for him. Last year I created a card with the Give a Whirl Dies and in the past years, I created a Never-Ending Card, a Slider card, a wobble card and so on. He always says that I make the best cards EVER! Got to love that!
Details of My Pop & Twist Card
For my card, I decided to create a Pop & Twist card. I love how when you open the card, the images on the inside fold out and pop up!
The front of the card is one of the designs from the kit. I just cut it to fit a portrait card. I added a couple of stamped party hats from the stamp set that is included in the kit. A mat of Granny Apple Green was added behind the focal point.
Close Up of Card Front
The inside is where I got creative! There are four panels and I thought that incorporating each of the die cuts (eggs, cherries, banana, and toast) that came with the kit, would work well!
Pop-Up Inside Card
First Panel
For the first panel, I used an egg theme. I love the pun “have an egg-cellent day” and couldn’t resist using “egg-cited for you” too! Just too fun! I used one of the card bases that I cut down with a Granny Apple green mat to fit my panel.
First Panel of Pop-Up Inside of Card
Second Panel
The next panel had the theme of cherries. So, I used the inside of one of the envelopes for the background pattern. I thought the red dots went perfectly with those sweet cherries! This is one of the things I love about the kits! The envelopes are printed both on the outside and the inside. So, once you cut them open, you can reverse the coordinating patterns to suit your design.
Second Panel on Pop-Up Inside Card
Third Panel
For the third panel the theme was the banana. Again, I used the inside of an envelope for the background. The speech bubbles are so fun!
Third Panel on Pop-Up Inside Card
Fourth Panel
For the last panel, the theme was the toast. I didn’t have an appropriate sentiment. So, I printed one off on my computer to suit the birthday theme. I used the inside of an envelope once again for my background piece. Aren’t the glasses on the toast fun!
Fourth Panel on Pop-Up Inside Card
I added a scattering of the Enamel stickers that came with the kits on all the panels.
Product Details of the Lots of Pun Paper Pumpkin Past Kit
Make cards to “loaf” with the Lots of Pun Paper Pumpkin Past Kit! Restock on cute ‘n’ colorful die-cut snacks and one-of-a-kind patterns and designs. Keep the laughs rolling and those knees slapping with everything you need to make fun ‘n’ fresh cards all year long. Don’t miss out on this egg-cellent opportunity to craft with the Lots of Pun Paper Pumpkin Kit!
Kit includes:
9 printed card bases: 3 each of 3 designs 9 printed envelopes Precut paper pieces Precut vellum pieces Enamel stickers Twine Adhesive
Completed card size: 4-1/4″ x 5-1/2″
Product colors: Crumb Cake, Daffodil Delight, Early Espresso, Granny Apple Green, Pool Party, Poppy Parade
Supplies:
Stamps/Bundles/Dies: Lots of Pun Paper Pumpkin Past Kit (159304)
Inks: Early Espresso Spot (From Kit)
Paper: Pool Party (122924), Granny Apple Green (146990), Printer Paper for toast sentiment
Accessories: Paper Snips Scissors (103579), Bone Folder (102300), Dimensionals (from kit), Stampin’ Seal (152813), Mini Glue Dots (from kit)
Measurements:
Pool Party:
Card Base: 4 ¼” x 11” scored a 5 ½”
Panel Strip: 10” x 3 ½” scored on long side at 2 ½”, 5” & 7 ½”
Pop Out Mechanism: 8” x 3 ½” scored on short side at 1 ¾”
Mark long side at 2 ¼” & 5 ¾” (both sides) and score diagonally
Hello Crafty Friends! Laurie here again! I am sharing my Beyond the Horizon Alternative Cards using the March 2022 Beyond the Horizon Paper Pumpkin. I loved this kit! It was perfect for all those masculine cards that you need to make. And I loved that it coordinated with the New Horizons Suite Collection!
I loved this Kit so much, that I created several alternative cards! I have gone into detail for my Mini Slimline Tri-Fold Window. At the end of this post, I have photos of all the other alternative cards with brief descriptions.
Details of My Mini Slimline Tri-Fold Window Card
For my first card, I decided to create a mini slimline Tri-Fold Window Card by combining the Paper Pumpkin Kit and the New Horizons Suite Collection. I thought it would be neat to see the beautiful water coloured scene peeking out of the windows between the mountain die cuts that came with the kit!
How to Cut the Card Base
The Misty Moonlight card base is 6” x 10.5” and scored at 3.5” and 7” along the long side to create 3 panels. I used the 2 largest retired Stitched Squares to create my windows for the scene. The largest Square on the outside panel and the next size down on the inside panel.
The Front Panel
Front of Tri-Fold Card
I cut apart 2 envelopes to use for my background pieces in Old Olive and Bumblebee. The Old Olive piece was on the front panel and the Bumblebee was on the right inside panel.
Tip: since the envelopes are thinner than card stock, you can glue them down and cut both the panel and the envelope at the same time.
The envelopes are printed on both sides. So, I was able to flip over leftover pieces where I needed another design such as the cross hatching on the front panel and the Misty Moonlight dotted piece.
I used a small piece of the In Good Taste DSP for my fence to give it a wooden look. Don’t you just love the Pebbles Enamel Shapes! I couldn’t resist using them on three of my panels!
Close Up of Scene Through The Windows
The Right Inside Panel
I thought that the mountain dies that came in the Kit would be perfect to layer on the bottom of the Bumblebee window. Almost like you are looking through mountains at the scene.
Right Inside Panel
For this panel, I stamped the sentiment in Misty Moonlight onto a die cut Crumb Cake wood piece. Then I and layered it in front of a scrap of the dotted Misty Moonlight envelope.
Mountain Die Cuts with Scene
The Inside Panels
For the inside panels, I used leftover pieces of the envelopes under the windows and layered the leftover stitched squares on top.
For the left panel, I created a scene using the die cut trees from the Collection and the circle from the kit. Don’t you think the circle looks like a sun! I even used the trimmed top of the water-coloured piece for my sky behind the stitched square. I don’t throw anything out just in case I can use it.
Inside With All Panels Open
For the inside panel on the right, I used the sentiment from the floral stamp set that was the gift in the kit. I added some grasses and those pebbles again.
For the center piece, I added a Basic White mat to frame the water-coloured piece allowing an area to write.
Supplies:
Stamps/Bundles/Dies: New Horizons Suite Collection (157782)
Paper: Misty Moonlight (153081), Basic White (159276), Old Olive (100702), In Good Taste Designer Series Paper (152494), New Horizons 6″ x 6″ Designer Series Paper (157768)
Accessories: 1/8″ Cotton Ribbon Combo Pack Paper (158140), Pebbles Enamel Shapes (158141), Retired Stitched Rectangles, Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)
My Other Alternative Cards
Second Alternative Card
Second Alternative Card
This one of my alternative cards using the March Paper Pumpkin that I made for my Father-in-law’s birthday! It is based on the mini slimline design that they show on the back of the instruction sheet, but, of course, with a few tweaks from me.
I decided to use In Good Taste DSP for my fence to give it a wood texture. Since the card was for my FIL, I decided to use Old Olive card stock for the Time to Celebrate sentiment with the Lovely Labels Pick a Punch. A simple knot suited my FIL’s taste more than a bow. I used my Stampin’ Blends in Dark Old Olive and Dark Misty Moonlight to colour some rhinestones to match the New Horizons DSP.
Third Alternative Card
Third Alternative Card
I based this alternative on a mini slimline card, but I used the remainder of the New Horizon Designer Series Paper from the previous card. Since the DSP didn’t fill the background, I added a leftover piece of envelope behind the white embossed piece. I decided to use the Shaded Spruce die cut mountains that matched the jagged piece from the kit to create a base for my sentiment. For embellishments, I used the ribbon and the rhinestones from the Kit.
Fourth Alternative Card
Fourth Alternative Card
For this alternative, I decide to make a full A2 card using Misty Moonlight for the card base. I framed the scene with a Basic White frame, but if you were carefully with your trimming, you could use the card front with no frame. Then I add the wooden fence with die cut grass in front to balance the die cut mountains, circle and sentiment.
Fifth Alternative Card
Fifth Alternative Card
For my last alternative, I decided to cut apart one of the card fronts and added them to an Old Olive card base. I layered the sentiment on some leftover pieces from the Kit. I then added Misty Moonlight ribbon and rhinestones for my embellishments.
The Cards from the Kit
The Cards That the Kit Makes
More Information on my Beyond the Horizon Alternative Cards:
For more of my Stampin’ Up! cards, please click here.
To view my Paper Pumpkin Alternatives for other kits, please click here.
