Masculine Cards - Stamp With Laurie

My Wedded Bliss Card

May 28, 2024 2 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing My Wedded Bliss Card using the digital stamp Wedding Bells by Tiddly Inks Stamps! This past weekend, we celebrated a wonderful couple who tied the knot!

The Details of My Wedded Bliss Card

For my card, I decided to colour with my Copic markers the couple on the card to look like the bridal couple who were getting married. I added Silver Gelly Roll Pen to the Bride’s tiara, her ring and the veil to tie in the silver embossed sentiment. Next, I used Clear Wink of Stella on her veil for even more sparkle.

The Lady’s Diary papers created an elegant look which tied in the masculine with the pinstripes and the feminine with the florals. The flowers and leaves were also punched out using the matching papers in the Lady’s Diary Pad.

Since this was a wedding card and I wanted an elegant look, I decided to emboss the sentiment before die cutting it out. I added a silver foil border to some leafy vellum that I tucked behind the sentiment. I also silver embossed the inside sentiment, added a silver foil border and a strip of the floral paper.

Finally, for embellishments, I added two heart charms, some silver metallic pearls to mirror the embossed silver accents and pearl jewels for the flower centres.

————————–

Copic Markers

Groom
Skin: E04/E11/E21/E00/E000
Hair: E49/E47/E44/E43/E42
Suit/Tie: B99/B97/B95/B93
Shirt: C3/C1/0

Bride
Skin: E04/E11/E21/E00/E000/R20
Hair: C9/C7/C6/C4/C3
Dress/Veil: B000/B00/0/Silver Gelly Roll Pen
Necklace: B97/B95/B93/R85/Star Dust Stickles

————————–

Card Recipe for My Wedded Bliss Card

Wedding Bells, Tiddly Inks Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Lady’s Diary 6” x 6” Paper Pad, P13
Silver Foil Sheet, Stampin’ Up!
Vellum Basics 12” x 12” Specialty Designer Series Paper, Stampin’ Up!
Something Fancy Dies, Stampin’ Up!
Lifetime of Love Stamp Set, Stampin’ Up!
Special Celebrations Stamp Set, Stampin’ Up!
Versamark Ink, Stampin’ Up!
Silver Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
Hydrangea Punch, Martha Stewart
Leaf Punch, EK Success
Heart Charms, Stampin’ Up!
Festive Pearls, Stampin’ Up!
Pearl Basic Jewels, Stampin’ Up!
Silver Gelly Roll Pen, Sakura
Star Dust Stickles, Ranger
Clear Wink of Stella, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

I also made a Bridal Shower card a while back for the Bride-to-Be using Uptown Couple Emily and Ryan Under the Umbrella by Stamping Bella and thought I would share it here as well.

Bridal Shower Card with a couple kissing under an umbrella — Bridal Shower Card

To view my other Copic Marker cards, please click here.

I hope you liked My Wedded Bliss Card using the digital stamp Wedding Bells by Tiddly Inks Stamps!

Thank you for stopping by!

Hugs,
Laurie

Aim to Misbehave Card

May 17, 2024 2 Comments

Hello Crafty Friends! It’s Laurie here to share my Aim to Misbehave Card using Space Western Stamp Set by Kindred Stamps! This card was for a good friend’s birthday. I know he loves the TV show Firefly and the movie Serenity! So, I knew this stamp set would be perfect for him!

The Details of My Aim to Misbehave Card

For my card, I wanted to include all the characters on his card. So, I went with a fun fold that is called an Accordion fold which is a booklet that unfolds like an accordion! I have included a video at the end to show my card in action.

But first, I coloured all the characters with my Copic markers. Then, I cut them out with my Brother Scan n’ Cut. Once that was done, I built my booklet using the Accordion Template that I have included at the end of this post. I also created a belly band with the ship to keep my card closed.

Next, I decorated the pages with the Stargazing Designer Series Paper by Stampin’ Up! Perfect for my space theme! I even used the Reach for the Stars Dies by Stampin’ Up! for the Holographic stars and for my planet on the belly band.

I used three sentiments from the stamp set and I created the one on the inside with my computer and printed it out.

Since the card was so bulky already, the only embellishments I added were a scattering of Holographic die cuts throughout the booklet.

————————–

Copic Markers:

Kaylee
Skin: E000/E00/E21/E11/E04/R20
Hair: E49/E47/E44/E43
Overalls: YG99/YG97/YG95
Shirt: RV17/RV13/E11
Boots: E39/E37/E35
Wrench: C3/C1

Kaylee - Mechanic — Kaylee, the Mechanic

Wash
Skin: E000/E00/E21/E11/E04
Hair: E25/YR24/Y26/Y21
Overalls: YG99/YG97/YG95
Shirt: C3/C1/YG97
Shoes: E39/E37/E35
Dinosaurs: YG67/YG63/YG03

Inara
Skin: E57/E55/E53/E51
Hair: C9/C6/C4/C3
Dress: E09/E08/E07
Dress Trim: Gold Gelly Roll Pen

Inara, the Companion and River, the Warrior

River
Skin: E000/E00/E21/E11/E04/R20
Hair: E18/E17/E15/E13
Outfit: YG99/YG97/YG95
Shoes: E39/E37/E35
Weapons: C3/C1

Jayne
Skin: E000/E00/E21/E11/E04
Hair: E49/E47/E43
Shirt: YG99/YG97/YG95
Hat: YR04/YR02/YR01/YR07/YR09
Shoes: E39/E37/E35
Socks: C6/C3
Pants: E33/E31/E30
Boots/Belt: E39/E37/E35
Weapon: C6/C3

Zoë
Skin: E15/E13/E11/R20
Hair: E49/E47/E44/E43
Shirt: YG99/YG97/YG95
Vest: E09/E08/E07
Shoes: E39/E37/E35
Pants: E33/E31/E30
Boots/Belt: E39/E37/E35
Weapon: E39/E37/C3/C1

Captain
Skin: E000/E00/E21/E11/E04
Hair: E39/E37/E35/E3
Shirt: E09/E08/E07
Pants: E33/E31/E30
Jacket: E18/E15/E13
Boots: E39/E37/E35
Gun: C6/C3
Suspenders: E39
Belt: E39/E37/E35

Serenity Ship
C6/C4/C3/C1/Y21/Y36
B000/B00

————————–

Card Recipe for My Aim to Misbehave Card:

Space Western, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Reach for the Stars Dies, Stampin’ Up!
Stargazing Designer Series Paper, Stampin’ Up!
Holographic Trio Specialty Designer Series Paper, Stampin’ Up!
Tuxedo Black Memento Ink, Stampin’ Up!
Brother Scan n’ Cut
Stitched Rectangle Dies, Stampin’ Up!
Metal Plate 3D Embossing Folder, Stampin’ Up!
Gold Gelly Roll Pen, Sakura
Glossy Accents, Ranger
Starry Sky, Basic White and Basic Gray Card Stock Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

Downloadable Accordion Card Template

To download a PDF of the Accordion Card Template, please click here or on the picture.

For more of my Kindred Stamps Copic cards, please click here.

Hope you like my Aim to Misbehave Card using the
Space Western Stamp Set by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

My Birthday Notes Card

April 29, 2024 2 Comments

Hello Crafty Friends! Laurie here again! I am sharing My Birthday Notes Card using the Nature’s Sweetness Suite Collection which includes the Notes of Nature Bundle, the Lovely & Sweet Bundle, the Nature’s Sweetness 12” x 12” Specialty Designer Series Paper and the Adhesive-Backed Cork Rounds all by Stampin’ Up! As I was exploring this gorgeous Suite, I ended up making 2 cards. I used one card for a swap, and this is the second card that I created. I will include a link to the other card at the end of this post. Some of these items are retiring! So, make sure you shop before they are gone!

The Details of My Birthday Notes Card

Like the other card, I thought it would be fun to continue the distressed field journal idea for my card front.

First, I stamped the Field Notes in Pecan Pie and added some distressing with the grunge stamp in Pebbled Path on the Basic White “page”. I added a Pecan Pie tab at the top and the die cut holes like a spiral notebook. To add a worn look to the “page”, I spritzed it with water and crumpled it. Then, by placing dimensionals in strategic locations on my unraveled “page”, I was able to keep a lot of dimension in it.

The sentiment was stamped in Pecan Pie, and I used a Pebbled Path label to make it pop from the “page”.

For this card, I decided to use the cross hatch and the text pieces of the DSP to create a booklet look behind my journal. To match the gold accents on the DSP I added a strip of gold foil on my base and die cut leaves on the Field Notes “page”.

The finishing touch was a scattering of Adhesive-Backed Cork Rounds that come in the Nature’s Sweetness Suite Collection.

Close Up of Field Journal Page — Close Up of Focal Point

Supplies:

Stamps/Bundles/Dies: Notes of Nature Bundle (162640), Lovely & Sweet Bundle (162627)

Inks: Pecan Pie (161665), Pebbled Path (161648)

Paper: Pebbled Path (161722), Basic White (159276), Pecan Pie (161717), Gold Foil Sheets (132622), Nature’s Sweetness Specialty Designer Series Paper (162616)

Accessories: Adhesive-Backed Cork Rounds (162643), Stampin’ Spritzer (126185), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683), water

Measurements:

Pecan Pie
- 8 ½” x 5 ½” scored at 4 ¼”
- Scrap for Tab
Basic White (2 pieces):
- 3” x 4”
- Scrap for Sentiment
Pebbled Path
- Scrap for Label
Gold Foil Sheets:
- ¼” x 5 ¼”
- Scrap for Leaves
Nature’s Sweetness Specialty Designer Series Paper (2 pieces):
- 1” x 5 ¼”
- 3” x 5 ¼”

More Information on My Birthday Notes Card

To find out more about my other card using the Nature’s Sweetness Suite Collection, please click here or on the photo.

My Field Notes Card - a birthday card — My Field Notes Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

My Fishing Birthday Card

April 9, 2024 8 Comments

Hello Crafty Friends! Laurie here again! I am sharing My Fishing Birthday Card using the Gone Fishing Bundle which includes the Gone Fishing Stamp Set and the Gone Fishing Dies by Stampin’ Up! I am so happy that this set is carrying over to the new Annual Catty!

The Details of My Fishing Birthday Card

This past weekend was my Father-in-law’s birthday and I decided to create a fun pop-up card with this bundle! I had a lot of fun decorating my tackle box and the front of the card!

Front of My Card

For the front of my card, I decided to use the tool box frame die and cut different pieces of DSP that represented my fishing theme. I used 4 different pieces of DSPs to fill the openings and the frame was from one of them being turned over.

For the sentiment, I stamped the “Let’s celebrate you!” from the Celebrate with You Tags Stamp Set in Misty Moonlight, die cut it with the Nested Essential Dies and matted it with a piece of Pebbled Path. The red/white baker’s twine was from my stash which I tied in a fun knot.

The die cut fishing rod from the retired Rugged Icon Dies was perfect for the theme of my card! So, I couldn’t resist using it and die cut it in the Galvanized Metallic Paper. I also cut it a second time so that I would have a Real Red fish to add interest.

A few fishing lures die cut in silver foil and a round float finished off the front of my card.

Inside of My Card

I had a lot of fun creating the inside of my card with the fun pop-up! If you want to learn how to make the pop-up mechanism, Rachel Tessman has a video.

Once I built my tackle box, I stamped and decorated it with the different pieces that come with the Gone Fishing Dies including another round float, lures, hooks, and all paraphernalia that a fisherman may need! Lol!

For the sentiment, I stamped the “Happy Birthday” from the Celebrate with You Tags Stamp Set in Misty Moonlight on Very Vanilla card stock and placed it on the top half of the inside of the card.

Hope you like My Fishing Birthday Card using the Gone Fishing Bundle which includes the Gone Fishing Stamp Set and the Gone Fishing Dies by Stampin’ Up!

Supplies:

Stamps/Bundles/Dies: Gone Fishing Bundle (161542), Celebrate with Tags Stamp Set (159974), Nested Essential Dies (161597), Rugged Icon Dies (Retired)

Inks: Misty Moonlight (153081), Real Red (147084), Wild Wheat (161651), Parakeet Party (159208), Calypso Coral (147101)

Paper: Real Red (102482), Basic White (159229), Very Vanilla (101650), Pebbled Path (161722), Parakeet Party (159259), Let’s Go Fishing Designer Series Paper (161534), Holographic Trio Specialty Paper (161744), Galvanized Metallic Paper (Retired)

Accessories: Red/White Baker’s Twine (from my stash), Bone Folder (102300), Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683), Paper Snips Scissors (103579)

Measurements:

Real Red:
- 5 ½” x 8 ½” scored a 4 ¼”
- 1” x 5” each scored at ½”, 2 ½” and 3” (2 pieces for mechanism)
Pebbled Path:
- Scraps for die-cutting full tray twice and half tray twice:
  - 1 ½” x 4-7/8”3 ½” x 4-7/8”
- ½” x 2 ½” scored at ½”, 1 ¼” and 1 ¾” (2 pieces for mechanism)
- 2” x 3”
Very Vanilla (2 pieces):
- 3” x 5 ¼”
- 1 ¾” 2 ½”
Basic White, Holographic Trio Specialty Paper, Galvanized Metallic Paper:
- Scraps for stamping and die-cutting tackle pieces
- Scraps for fishing rod
Let’s Go Fishing Designer Series Paper (4 pieces):
- 3 ½” x 4-7/8”

More Information on My Fishing Birthday Card:

For more of my Stampin’ Up! cards, please click here.

You will find the other items listed above in my online store.

Go Boldly Birthday Card

February 21, 2024 Leave a comment

Boldly Go Birthday Card - a space birthday card with Star Trek Next Generation characters on it. — Go Boldly Birthday Card

Hello Crafty Friends! It’s Laurie here to share my Go Boldly Birthday Card using The Next Space Explorers Stamp Set by Kindred Stamps! It was my brother’s birthday recently and he loved Star Trek Next Gen growing up! He loved it so much that one year we even had a Next Gen murder mystery birthday party for him! Lol!

The Details of My Go Boldly Birthday Card

For my card, I wanted to include all the characters on his card. So, I went with a fun fold that is like a booklet where you open each page to a new layout! I have included a video at the end to show it in action.

First Page of Booklet Card with two more characters — First Page of Booklet Card

But first, I coloured all the characters with my Copic markers and cut them out with my Brother Scan n’ Cut. Once that was done, I built my booklet using the template that I have included at the end of this post.

Next, was decorating the pages. The Stargazing Designer Series Paper by Stampin’ Up! was perfect for my space theme. I even used the Reach for the Stars Dies by Stampin’ Up! to create my ringed planet with Holographic DSP for the rings.

Second Page of Booklet with a final character — Second Page of Booklet Card

I used two sentiments from The Next Space Explorers stamp set and one with the Star Trek Symbol from the Space Explorers stamp set to fill the pages facing the characters.

Since the card was so bulky already, the only embellishments I added were a scattering of Holographic die cut stars throughout the booklet.

————————–

Copic Markers:

Captain Jean-Luc Picard
Skin: E000/E00/E21/E11/E04
Hair: C3/C1/C0
Reds: R29/R27/R24
Blacks: C9/C6/C4

Commander William Riker
Skin: E000/E00/E21/E11/E04
Hair: E29/E27/E25/E23
Reds: R29/R27/R24
Blacks: C9/C6/C4

Lieutenant Commander Data
Skin: E42/E41
Hair: E49/E59/E57/E55
Golds: Y28/Y26/Y21
Blacks: C9/C6/C4

Counselor Deanna Troi
Skin: E000/E00/E21/E11/E04/R20
Hair: C9/C6/C4
Outfit: V17/V15/V12
Grays: C4/C3/C1

Chief Engineer Geordi La Forge
Skin: E15/E13/E11
Hair: C9/C6/C4
Golds: Y28/Y26/Y21
Blacks: C9/C6/C4
Visor: W6/W4/W2/W0

Close Up of Two Characters on Inside of Card — Close Up of Characters on First Page

Lieutenant Worf
Skin: E15/E13/E11
Hair: C9/C6/C4
Golds: Y28/Y26/Y21
Blacks: C9/C6/C4
Bat’leth: W6/W4/W2/W0/E27

Star Trek Symbol
Golds: Y28/Y26/Y21
White Gelly Roll Pen

————————–

Card Recipe for My Go Boldly Birthday Card:

The Next Space Explorers, Kindred Stamps
Space Explorers, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Reach for the Stars Dies, Stampin’ Up!
Stargazing Designer Series Paper, Stampin’ Up!
Holographic Trio Specialty Designer Series Paper, Stampin’ Up!
Tuxedo Black Memento Ink, Stampin’ Up!
Brother Scan n’ Cut
White Gelly Roll Pen, Sakura
Paper Snips, Stampin’ Up!

Night of Navy and Tahitian Tide, Card Stock Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

Downloadable Booklet Card Template

To download a PDF of the Booklet Card Template, please click here or on the picture.

For more of my Kindred Stamps cards, please click here.

Hope you like my Go Boldy Birthday Card using the
The Next Space Explorers Stamp Set by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

Tool Time Father’s Day Card

February 16, 2024 Leave a comment

Hello Crafty Friends! Laurie here again! I am sharing my Tool Time Father’s Day Card using the Trusty Tools Bundle and the Trusty Toolbox 12” x 12” Designer Series Paper by Stampin’ Up! I love that the Trusty Tools Dies can cut out the tools from the Trusty Toolbox 12” x 12” Designer Series Paper which is free during Sale-a-Bration!

For my card, I decided to create a fun free standing pop-up card to display the die cut tools from the DSP on a pegboard! I made this card for a swap and used different tools from the DSP like the hammer, paint brush and wrenches while others, I fussy cut out. The thing that is great about these cards is that they fold flat to be mailed, but the recipient has that Wow! when they pop it up!

The Details of My Tool Time Father’s Day Card

For my pegboard, the die didn’t run the full length of the Crushed Curry card stock. So, I placed the die at the top leaving a small border. Next, I used liquid glue to adhere it to the Basic Black piece with a Basic White piece on the back for the message. I stamped the nuts and screw in Gray Granite in the corners of the Basic White piece to add interest. For the tools, I adhered them with liquid glue, as well since I wanted the pegboard piece to be as a flat as possible to allow it to slide.

Next, I scored and cut the Poppy Parade piece according to the instructions below. I have created a template that you can download at the end of this post.

Once that was done, I inserted the pegboard through cut and lined it up with the bottom of the folded Pappy Parade piece. Then I adhere it in place and then glue the other side of the bottom to it. This will create the pop-up mechanism.

To decorate my “work table”, I used Gray Granite strips embossed with the Metal Plate Embossing Folder to make it look industrial. The pencil and measuring tape were fussy cut out and laid down like they were just set down. The silver piece of Holographic Trio Specialty Paper was perfect for my nuts and screw to give them a metallic look.

The sentiment was stamped in Black with a trio of Rustic Metallic Adhesive-Backed Dots to add to my masculine theme.

Top View of Tool Bench — Top View of Card

Supplies:

Stamps/Bundles/Dies: Trusty Tools Bundle (162723)

Inks: Tuxedo Black Memento Ink Pad (132708), Gray Granite Classic Stampin’ Pad (147118)

Paper: Poppy Parade (119793), Gray Granite (146983), Crushed Curry (131199), Basic Black (121045), Basic White (159276), Holographic Trio Specialty Paper (161744), Trusty Toolbox Designer Series Paper (162978)

Accessories: Metal Plate 3D Embossing Folder (160766), Rustic Metallic Adhesive-Backed Dots (159082), Paper Trimmer (152392), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683), Multipurpose Liquid Glue (110755)

One of the Pop-Up Cards — Single Pop-Up Card

Measurements:

Poppy Parade:
- 11” x 4 ¼” scored at 1”, 2 ¾”, 3 ¾”, 5 ½”, 7 ¼”, 8 ¼” and 10”
- Vertical cut at 5 ½” score that is ¾” from the top and ¾” from the bottom
Gray Granite (4 pieces):
- 4” x ¾” (2 pieces)
- 4” x 1 ½” (2 pieces)
Basic Black: 2 ¾” x 5 ½”
Crushed Curry: 2 5/8” x 5 ¼”
Basic White (2 pieces):
- 2 5/8” x 4
- Scrap (Sentiment)
Holographic Trio Specialty Paper:
- Scrap
Trusty Toolbox Designer Series Paper:
- 3 tools, pencil and measurement tape

More Information on My Tool Time Father’s Day Card

Downloadable Free Standing Pop-Up Card Template

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Crackin’ Holidays Panel Card

November 13, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here! I am sharing my Crackin’ Holidays Panel Card as my Design Team Inspiration Card for Conie Fong Art & Design using the New Release Christmas Nutcracker Ensemble Bundle. This purchase includes 4 Images:

Image 1: Christmas Nutcracker Ensemble, PNG format
Image 2. Nutcracker Drummer, PNG format
Image 3. Nutcracker King, PNG format
Image 4. Nutcracker Soldier, PNG format

The Details of My Crackin’ Holidays Panel Card

For my card, I wanted to create a Nutcracker Ballet themed panel card that when closed, you see just the Soldier and Drummer and then you open it to see the King. So, I used the individual nutcrackers in the stamp set and coloured them in traditional colours with my Copic markers.

Front of Card with Soldier and Drummer Nutcrackers

For the panel card base, I used a premade card blank from Hunkydory, but you could easily create one yourself. I used a pencil and traced the edges of the card base onto the music DSP and then used my Paper Snips to cut it out. The music DSP was perfect to represent the March of the Nutcrackers music from The Nutcracker Ballet. Next, I brushed Vintage Photo onto the DSP. This was two-fold…one to cover where my cutting was not perfect and the other to add a finished edge to the base.

To highlight the nutcrackers in each of their panels, I layered each with a plaid piece of DSP that matched my colouring and a Real Red mat that I die cut out with the Mini Slimline Stackables from Lawn Fawn. For the smaller panels, I used nutcracker DSP with Real Red mats and a pair of glimmery ballet slippers to match my theme.

For embellishments, I added some distressed gold die cut garlands and ribbons at the top of each nutcracker panel. I also added some red rhinestones to add some sparkle, in addition, to the Clear Wink of Stella on all the gold trim of the nutcrackers.

To keep my card closed, I created a 1 ½” belly band of DSP and Real Red card stock with an ornament sticker from my stash.

————————–

Copic Markers:

Soldier Nutcracker
Skin: E000/E00/E21/E11/E04
Hair: E18/E15/YR23/Y21
Cheeks: R21/R20
Reds: R59/R29/R27/R24
Greens: G99/YG67/YG63/YG61
Blues: B37/B14/B12
Golds: YR24/YR23/Y21
Blacks: C9/C6/C4
Sword: C4/C3/C1/YR24/YR23/Y21

King Nutcracker
Skin: E000/E00/E21/E11/E04
Hair: C9/C6/C4
Cheeks: R21/R20
Reds: R59/R29/R27/R24
Greens: G99/YG67/YG63/YG61
Blues: B37/B14/B12
Blacks: C9/C6/C4
Golds: YG24/YG23/Y21

Drummer Nutcracker
Skin: E000/E00/E21/E11/E04
Hair: E37/E35/E33
Cheeks: R21/R20
Reds: R59/R29/R27/R24
Greens: G99/YG67/YG63/YG61
Blues: B37/B14/B12
Blacks: C9/C6/C4
Golds: YR24/YR23/Y21

————————–

Card Recipe for My Crackin’ Holidays Panel Card:

Christmas Nutcracker Ensemble Bundle, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Eastern Wishes Screen Shaped Card Blanks, Hunkydory Crafts
Christmas Around the World 12” x 12” Designer Series Paper, Stampin’ Up!
This Christmas Specialty 12” x 12” Designer Series Paper, Stampin’ Up!
Sparkle Glimmer Paper, Stampin’ Up!
Distressed Gold 12” x 12” Specialty Paper, Stampin’ Up!
Large Mini Slimline Stackables Dies, Lawn Fawn
Small Mini Slimline Stackables Dies, Lawn Fawn
Christmas Classics Dies, Stampin’ Up!
Little Happiness Ballet Shoes, Joy Crafts
Vintage Photo Ink Pad, Ranger
Blending Brushes, Stampin’ Up!
Versafine Onyx Black Ink Pad, Tsukineko
Crackin’ Holiday Stamp Set, Krafton’ Kimmie Stamps
Real Red & Garden Green Ribbon Combo Pack, Stampin’ Up!
Red Rhinestone Basic Jewels, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!
Ornament Sticker, From my Stash
Paper Snips, Stampin’ Up!

Real Red Card Stock, Stampin’ Up!

Finished card size: 4-¼” x 6-1/8”

My Card in Action

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using
Christmas Nutcracker Ensemble Bundle for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

It’s Showtime Birthday Card

November 2, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here to share my It’s Showtime Birthday Card using the Showtime Stamp Set by Kindred Stamps! It was my Hubby’s birthday this past weekend and this is the fun pop-up card that I made him!

The Details of My It’s Showtime Birthday Card

My hubby and I both grew up watching the Muppets and when I saw this stamp set, I knew he would get a kick out of it, especially the grumpy old men! They were always his favourite!

For my card, I decided to create a stage on the front with the Cast & Crew wishing him a Happy Birthday and then a fun pop up of the theatre box on the inside.

But first, I coloured all the characters with my Copic markers and cut them out. Once that was done, I built my stage. Since I didn’t have curtain dies, I used the Platform Pop-Up Hillside Inserts Dies to create one. They fit together perfectly for my curtains! I added a floor to the stage with some wood grain DSP.

The text for the word bubbles was created on my computer, printed out and die cut with the Conversations Bubbles dies.

Inside of Card show Theatre Pop-up Box — Inside of Card showing Theatre Pop-up Box

For the inside of my card, I used the Platform Pop-Up and Add-On dies to create my theatre box that the grumpy old men sit in it on the show. I had to trim their legs off to make them fit. Lol! I couldn’t resist adding Animal to the inside as well since he is another favourite of my Hubby, and I can see him climbing the box with his crazy antics! Lol!

Since the card was so bulky already, the only embellishments I added were a scattering of gold sequins.

————————–

Copic Markers:

Kermie
Skin: YG17/YG13/YG03/YG01
Mouth: R27/R24/R22
Tongue: R22/C6/C4
Eyes: C3/C1/0

Close Up of the Frog — Close Up of Kermit the Frog

Fozzie Bear
Fur: R08/YR68/Y38/YR31
Mouth: R27/R24/R22
Nose: R27
Eyebrows: E37
Hat: E37/E35/E34
Tie: C3/C1/0/R22

Close Up of the Bear — Close Up of Fozzie Bear

Miss Piggy
Skin: R20/R11/R000
Hair: E25/YR24/Y26/Y21
Dress/Shoes: R85/R83/R81
Belt: C6/C4/C3
Gloves/Pearls: C3/C1/0

Close Up of Pig — Close Up of Miss Piggy

Dr. Bunsen Honeydew
Skin: YG13/YG03/YG01
Medical Coat/Shirt: C3/C1/0
Pants: E39/E37/E35
Vest: YG97/YG93
Shoes: C6/C4
Tie: R22

Close Up of Doctor — Close Up of Dr. Bunsen Honeydew

Swedish Chef
Skin: E04/E11/E21/E00/E000
Hair: E37/E35/E34
Apron: C3/C1/0
Shirt/Pants: B39/B37/B34
Tie: R27/R24/R22
Shoes: E37/E34

Close Up of Chef — Close Up of Swedish Chef

Beaker
Skin: R20/R11/R000
Hair: E18/E08/YR18/YR14
Mouth: R22
Nose: E18/E08/YR18
Medical Coat: E43/E41/E40
Shirt/Shoes: C3/C1
Tie: YG97

Close Up of Medical Lab Assistant — Close Up of Beaker

Waldorf
Skin: E04/E11/E21/E00/E000
Hair/Shirt: C3/C1
Suit: E39/E37/E35/E34
Tie: R27/R24

Statler
Skin: E04/E11/E21/E00/E000
Hair/Shirt: C3/C1/0
Suit: B39/B37/B34
Tie: B34

Animal
Fur: E18/E08/YR18/YR14
Eyebrows: C9/C6/C4
Mouth/Tongue: R29/R22/C6/C4/YR24
Nose: R27/R24/R22
Shirt: E43/E25
Jacket: R27/R24/R22/YR24
Pants: B37/B34

Close Up of two old men in theatre box with another muppet climbing the box. — Close Up of Waldorf, Statler and Animal

————————–

Card Recipe for My It’s Showtime Birthday Card:

Showtime Stamp Set, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Platform Pop-Up Dies, Lawn Fawn
Add-On Platform Pop-Up Dies, Lawn Fawn
Hillside Inserts Platform Pop-Up Dies, Lawn Fawn
Conversations Bubbles Dies, Stampin’ Up!
Wood Textures Designer Series Paper, Stampin’ Up!
Guy Greetings Stamp Set, Stampin’ Up!
Tuxedo Black Memento Ink, Stampin’ Up!
Neutrals Adhesive-Backed Sequins, Stampin’ Up!
Paper Snips, Stampin’ Up!
Basic Black and Real Red, Card Stock Stampin’ Up!

Finished card size: 5 ½” x 5 ½”

It’s Showtime Birthday Card in Action

————————–

For more of my Copic cards, please click here.

Hope you like My Showtime Birthday Card using the
Showtime Stamp Set by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

My Vintage Christmas Card

October 25, 2023 2 Comments

Hello Crafty Friends! Laurie here again! I am sharing My Vintage Christmas Card using the Saint Nicholas Bundle by Stampin’ Up! which includes the Saint Nicholas Stamp Set and the Saint Nicholas Dies. My card was designed for a swap of the September-December 2023 Mini Catalogue.

The Details of My Vintage Christmas Card

For my card, I decided to make a vintage feel card since the Saint Nicholas is an old fashion Santa Claus. To achieve this feeling, I stamped Saint Nicholas on Very Vanilla card stock in Gray Granite Ink to give him a lighter, almost no-lines, look rather than the traditional Memento black that I usually use with my Stampin’ Blends. I have included some links at the end of this post with more Stampin’ Blends colouring tips.

My Colourings of Santa Claus — My Colourings of Saint Nicholas

Once Saint Nicholas was coloured with my Blends, I die cut him out with the matching Saint Nicholas Dies.

Next, I embossed the Crumb Cake card stock with the Distressed Tile 3D Embossing Folder and brushed Crumb Cake ink along the edges to give it a worn look. The sentiment was also brushed with Crumb Cake once it was stamped in Gray Granite and die cut out with the Countryside Corners Dies.

I loved the stockings and decided to create a DSP tag incorporating them and the sentiment. The tag was inspired by one of the cards in the catalogue. The catalogues are a great place for inspiration! Lol! I added a Real Red bow at the top of the tag to match my colour scheme.

A strip of music DSP with a Real Red matt helped to anchor my focal point. The final embellishments were a couple of gems from the Loose Holly Gems & Sequins.

Supplies:

Stamps/Bundles/Dies: Saint Nicholas Bundle (163859), Tailor Made Tags Dies (155563), Countryside Corners Dies (161471)

Inks: Gray Granite Classic Stampin’ Pad (147118), Crumb Cake Classic Stampin’ Pad (147116)

Paper: Thick Very Vanilla (144237), Real Red (102482), Crumb Cake (120953), Very Vanilla (101650), Joy of Christmas Designer Series Paper (161958)

Accessories: Distressed Tile 3D Embossing Folder (162189), Real Red Stampin’ Blends Combo Pack (154899), Crumb Cake Stampin’ Blends Combo Pack (154882), Shaded Spruce Stampin’ Blends Combo Pack (154903), Smoky Slate Stampin’ Blends Combo Pack (154904), Basic Black Stampin’ Blends Combo Pack (154843), Stampin’ Blends Light Combo Pack (159465), Stampin’ Blends Color Lifter (144608), Loose Holly Gems & Sequins (161981), Real Red & Burlap Ribbon Combo Pack (160386), Blending Brushes (153611), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683), Mulitpurpose Liquid Glue (110755)

Close Up of Santa Claus — Close Up of Saint Nicholas

Measurements:

Thick Very Vanilla:
- 8 ½” x 5 ½” scored at 4 ¼”
Real Red: (3 pieces)
- 5-3/8” x 4-1/8”
- 2-1/8” x 4”
- Scraps (Stockings)
Crumb Cake:
- 4” x 5 ¼”
Very Vanilla: (3 pieces)
- 2” x 3 ¾” (Saint Nicholas)
- 2-7/8” x 1-5/16” (Sentiment)
- Scraps (Stockings)
Joy of Christmas Designer Series Paper: (2 pieces)
- 2” x 4”
- 2” 3-7/8” (Tag)

More Information on My Vintage Christmas Card:

For more of my Stampin’ Blends cards, please click here.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

How to Use Stampin’ Blends
https://stampwithlaurie.com/wp-content/uploads/2020/08/Stampin-Up-Blends-2020.pdf

Part 1: Whiskey Business Card using Blending Different Colours Technique
Video Tutorial: Blending Different Colours Together

Part 2: Country Harvest Card using Light to Dark Technique
Video Tutorial: Light to Dark/Dark to Light Colouring

Part 3: Beautiful Poppy Birthday Card using Smooth Colouring Technique
Video Tutorial: Smooth Colouring

Part 4: Let’s Gather Together Card using Tip to Tip Blending Technique
Video Tutorial: Tip to Tip Colouring

Part 5: So Grateful Cardinal Card using Flicking Colouring Technique
Video Tutorial: Flicking Colouring

Part 6: Let’s Celebrate You Card using Flicking of Different Colours Technique
Video Tutorial: Flicking of Different Colours Technique

No-Lines Technique Cards: My Cardinal Anniversary Card and My Cardinal Card

How to Create a Scene:https://youtu.be/6w4fkxgA9rg

Our Steampunk Journey Card

September 28, 2023 4 Comments

My Steampunk Journey Card - an anniversary card with gears and love on it — My Steampunk Journey Card

Hello Crafty Friends! Laurie here again! I am sharing Our Steampunk Journey Card using the Stamperia Vagabond Series of paper and die cuts to create my anniversary card for my Hubby.

The Details of Our Steampunk Journey Card

My Hubby is always encouraging me to do what I love and explore mixed media more since I am still a novice. So, I decided to create a fun mixed media front with a steampunk feel for his anniversary card. He loves anything steampunk and I bought the Stamperia papers and all the bits in anticipation of making a card for him.

Angled View of Folds of the card — Angled View of Folds of the Card

For my card, I only used papers and die cuts…no stamping or colouring for me which is a rarity for me! Lol! But, when I saw the Stamperia papers, I knew that I wanted to create a 3-step fun fold card that would keep on going as my hubby opened it…almost like a mini album. I even decorated the back of it and made a custom envelope with the papers.

Fun with Mixed Media

For my mixed media, I sponged black gesso on my chipboards and then rubbed with my fingertips the Brushed Iron and Firebird waxes over the “Love” piece to help differentiate it from the other chipboard pieces. Next, I added some Gilding Flakes to give it some shimmer and brushed more wax where needed to give it a gritty feel. More gears that were rubbed with the Brushed Iron wax were adhered with glossy accents on top of the “Love” piece for dimension.

Mixed Media of gears and word love — Mixed Media

Once that was done, I added a gear frame tag behind the decorated chipboard that consisted of a snippet of paper with a small clock. The gears on this tag were lightly rubbed with the Brushed Iron wax as well. I added a few clear die cuts from Stamperia to represent my theme of a marriage being a journey, albeit a steampunk one! Lol!

Close Up of the gears and word love — Close Up of Mixed Media Focal Point

A monocle with an attached ball bead chain was glued in place with glossy accents. A scattering of red rhinestones added some sparkle and brightness to the front.

Part of Inside of Card — Inside of Card – Part 1

For my backdrop of my focal point, I decided to use a clock since it is the epitome of steampunk! I fussy cut two clocks out from the papers…one for the front and one for the back of the circle since you will see it when the card is opened. I needed a 5 ½” circle to mount these clocks and since I didn’t have a die that big, I pulled out my retired circle cutter from Stampin’ Up! It was what they used before they had dies!

Another Part of Inside of Card — Inside of Card – Part 2

Inside Our Steampunk Journey Card

For the inside of my card, I used several steampunk dies cuts and brushed the Brushed Iron wax on them to bring out the details. I even brushed it on the black edges of all the folds and card base. Of course, I used lots of die cut gears again with a stylized steampunk key, watch and wings! A few clear die cuts from Stamperia were added inside to continue my theme of a journey.

Since the back was so long, I used two different papers and pieced them together to create a continual scene of a pilot in flight on one side and flight gear on the other.

Full Back of Card with pilot and flight gear — Full Back of Card Laid Flat

————————–

Card Recipe for Our Steampunk Journey Card:

12” x 12” Paper, Sir Vagabond Aviator, Stamperia
6” x 6” Paper, Sir Vagabond Aviator, Stamperia
Sir Vagabond Aviator Collectables, Stamperia
Steampunk Greyboard Cuts and Scraps, Stamperia
Sir Vagabond Aviator Clear Die Cuts, Stamperia
Black Gesso, Deco Arts Americana
Makeup Sponges
Verdigris Gilding Flakes, Cosmic Shimmer
Art Alchemy-Metallique Wax – Brushed Iron, Prima Marketing
Art Alchemy-Metallique Wax – Firebird, Prima Marketing
Industrial Chic – Frame & Tag Dies, Sue Wilson, Creative Expressions
Industrial Chic – Mixed Essentials Dies, Sue Wilson, Creative Expressions
Garage Gear Thinlits Dies, Stampin’ Up!
Monocles, Idea-ology, Tim Holtz
6” Ball Bead Chain with Connector Clasp, Local Hardware Store
Red Rhinestone Jewels, Stampin’ Up!
Black Ribbon, From my Stash
Floral Romance Seal, Stampin’ Up!
Silicon Craft Mat, Stampin’ Up!
Glossy Accents, Ranger
Circle Cutter, Stampin’ Up!
Paper Snips, Stampin’ Up!
Liquid Glue, Stampin’ Up!

Basic Black and Very Vanilla Card Stock, Stampin’ Up!

Finished card size: 6” x 6”

Our Steampunk Journey Card in Action

A Pictorial of the Card — Different Views of the Card

————————–

To view my other mixed media piece, please click here.

To view my other steampunk cards, please click here.

Hope you like Our Steampunk Journey Card using the Stamperia Vagabond Series!

Thank you for stopping by!

Hugs,
Laurie

My Aloha Santa Card

September 15, 2023 4 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing My Aloha Santa Card for as my Design Team Inspiration Card for Paper Nest Dolls using Vacation Santa Set. There are 7 stamps, which include Surfer Santa, Ice-cream Santa, Santa with Reindeer Floatie, Santa & Mrs. Claus, Palm Tree and Flamingo & Gifts, that come in both rubber and digital stamps. I made cards with Ice-cream Santa and Santa with Reindeer Floatie from this set as well and will include a link to them at the end of this post.

The Details of My Aloha Santa Card

For my card, I thought to create an Aloha card since Hawaii is the perfect place for Santa to take a vacation before his busy time of year! Lol!

Once Santa was coloured with my Copic markers in bright vacation colours, I placed him on a stitched circle cut out from paper that looked like pool water. I thought it would be fun to place the “pool” off-centred on the card and trim a small piece off the one edge.

Don’t you just love the sparkle of the Aloha sticker, and it pulls out the orange that I used in my colouring! Of course, if Santa is in the land of paradise, he needs a sunny day to folic in the pool! Hence the die cut sun behind the Aloha. Lol!

For my card base, I used green DSP for my palm die cut frame and then some orange DSP with flowers behind it to add to my colour scheme. To mirror the palm die cut, I used a paper palm leaf in one corner.

I added some Star Dust Stickles to Santa’s hat trim, white Gelly Roll Pen for the shine on his floatie and Glossy Accents to Rudolph’s nose. Finally, for embellishment, I used a few sprinkles to match the colours of my card.

————————–

Copic Markers

Skin: E15/E13/E11/E00/E000
Beard: C3/C1/C0
Reds: R29/R27/R24/R22
Oranges: YR09/YR07/YR04/YR02
Reindeer: E35/E33/E31/E30/E31/E53/E51/E50/R29/R27/R24
Coconut Drink: R85/R83/R81/C3/C1/0/E33/E31/E30/E53/E51/E50

Close Up of Santa floating in a pool — Close Up of Santa

————————–

Card Recipe for My Aloha Santa Card

Vacation Santa Set, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Island Oasis 12” x 12” Designer Series Paper, Stampin’ Up!
Make a Splash Collection 6” x 6” Paper Pad, BoBunny
Spring Showers Dies, Lawn Fawn
Stitched Circle Layering Dies, Memory Box
Palm Leaf Frame Die, Paper Roses
Summer Glitter Assortment Sprinkles, Doodlebug Design Inc.
Paper Palm Leaves, The Paper Studio
Aloha Sticker, Crafter’s Square
White Gelly Roll Pen, Sakura
Star Dust Stickles, Ranger
Glossy Accents, Ranger
Tahitian Tide Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 3”

————————–

My Other Cards Using this Set

For more information on my card, please click here or on the photo.

A Christmas Card with Santa on a floatie in a pool. — My Interactive Tubing Santa Card

A card with Santa on a beach eating ice cream — Santa on Vacation Card

Hope you like my Design Team Inspiration Card using
Vacation Santa Set by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

My Achievement Unlocked Card

September 12, 2023 2 Comments

Hello Crafty Friends! Laurie here again! I am sharing My Achievement Unlocked Card using the Level Complete Stamp Set by Stampin’ Up! Tomorrow is National Video Games Day and this stamp set is perfect way to celebrate all those gamers in your life (and I have many! Lol!)!

The Details of My Achievement Unlocked Card

For my card, I decided to pull my fun colour scheme from the Bright & Beautiful DSP which I thought was perfect for a gamer card! Once I decided that, I stamped all the bits from the stamp set on a piece of Basic White in the various colours. I saved the controller stamp so that I could heat emboss it in white on a piece of Azure Afternoon which I then fussy cut out.

The Countryside Corners Dies were used to die cut out the stamped piece, the mat, and the Blueberry Bushel stamped sentiment. In addition to them, I used the smallest die to create coloured flags under the sentiment show the “different levels unlocked”.

Since I created this card for a swap, I went with a panel of three different papers for my card base. This allowed me to get more cards made using the paper with minimal waste. Plus, it permitted me to include a piece of the stars paper on each card. To me, stars are the personification of a gamer card!

To mirror the stars from the DSP, I die cut some stars from the Holographic Trio Specialty Paper using the Give It a Whirl Dies. Love that the colours seem to shift and change as you move holographic paper! Such a fun mesmerizing effect for a fun card!

Four gems from the Tinsel Gems Four-Pack were used to mimic the buttons on the controller and to add some colour the controller.

Supplies:

Stamps/Bundles/Dies: Level Complete Stamp Set (161563), Countryside Corners Dies (161471), Give It a Whirl Dies (154336)

Inks: VersaMark (102283), Blueberry Bushel (147138), Azure Afternoon (161663), Berry Burst (147143), Lemon Lolly (161666), Lemon Lime Twist (147145)

Paper: Blueberry Bushel (146968), Azure Afternoon (161719), Basic White (159276), Berry Burst (144243), Lemon Lolly (161720), Lemon Lime Twist (144245), Bright & Beautiful 6” x 6” Designer Series Paper (161449), Holographic Trio 12” x 12” Specialty Paper (161744)

Accessories: Basics Embossing Powder (155554), Heat Tool (129053), Tinsel Gems Four-Pack (161623), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of video controller on card — Close Up of Card

Measurements:

Blueberry Bushel (2 pieces):
- 8 ½” x 5 ½” scored at 4 ¼”
- 5” x 3 ½”
Azure Afternoon:
- 2 ¼” x 3”
Basic White: (2 pieces)
- Sentiment: 2 ¼” x ½”
- Background: 4 ½” x 3”
Lemon Lolly:
- Scrap
Berry Burst:
- Scrap
Lemon Lime Twist:
- Scrap
Bright & Beautiful 12” x 12” Designer Series Paper (3 pieces):
- 4” x 1-5/8”
Holographic Trio 12″ x 12″ Specialty Paper:
- Scraps

More Information on My Achievement Unlocked Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Santa on Vacation Card

July 25, 2023 2 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing my Santa on Vacation Card for Christmas in July and as my Design Team Inspiration Card for Paper Nest Dolls using Vacation Santa Set. There are 7 stamps, which include Surfer Santa, Ice-cream Santa, Santa with Reindeer Floatie, Santa & Mrs. Claus, Palm tree and Flamingo & Gifts, that come in both rubber and digital stamps.

The Details of My Card

For my card, I decided to create a summer beach scene with Santa enjoying his ice cream! I coloured Santa and the palm tree with my Copic Markers. I love that he has a candy cane in his ice cream! Lol! I added Glossy Accents to his glasses and the light bulbs on the palm tree. For the palm tree, I used Clear Star Gelly Roll Pen to make the star sparkle and Silver Gelly Roll Pen on the wires for the lights.

Next, onto the scene building! The sky was created with watercolor paper and blending two blue Distress Oxide Inks onto it with my blending brush. Then, I used my splatter brush to splatter water to create some texture. Once that was done, I die cut some sand dunes and embossed them to give them the texture of sand. Finally, the sun and cloud were added to finish off my scene.

For the sentiment, I wanted just “Merry and Bright” even though the sentiment was “May Your Days be Merry and Bright”. So, I used Scotch Tape (you could also use a post-it note) to mask off the text that I didn’t want. Remember to remove the tape before you stamp though! Once the sentiment was stamped, I heat embossed it in white and die cut it out.

My beachy scene was added to a piece of Make A Splash paper that had palm trees in a bright greens and blue sky to mirror my scene.

The only embellishments added were some red rhinestones scattered around my focal point.

————————–

Copic Markers

Santa
Skin: E15/E13/E11/E00/E000
Beard: C3/C1/C0
Reds: R29/R27/R24/R22
Greens: YG67/YG63/YG03
Ice Cream Cone: E35/E33/E31
Ice Cream: R85/R83/R81/E35/E33/E31/E53/E51/E50

Close up os Santa eating an ice cream cone — Ice-Cream Santa

Palm Tree
Trunk/Coconuts: E35/E33/E31/E30
Leaves: YG67/YG63/YG03
Wire: C3/C1/C0
Red Light Bulbs: R29/R27/R24
Green Lights Bulbs: YG67/YG63/YG03
Blue Lights Bulbs: B28/B24/B32
Yellow Lights Bulbs/Star: Y38/Y35/Y32

Card Recipe for My Santa on Vacation Card

Vacation Santa Set, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Make a Splash 6” x 6” Paper Pad, Bo Bunny
Watercolor Paper, Stampin’ Up!
Stitched Circle Layering Dies, Memory Box
Slimline Stitched Hillside Border Dies, Lawn Fawn
Spring Showers Dies, Lawn Fawn
Stylish Shapes Dies, Stampin’ Up!
Subtle Textured Embossing Folder, Stampin’ Up!
Simple Strips – Christmas, Taylored Expressions
Versamark Ink Pad, Stampin’ Up!
White Embossing Powder, Stampin Up!
Heat Tool, Stampin’ Up!
Salty Ocean Distress Oxide Ink, Ranger
Tumbled Glass Distress Oxide Ink, Ranger
Blending Brush, Stampin’ Up!
Tim Holtz Splatter Brush, Ranger
Glossy Accents, Ranger
Clear Star Gelly Roll Pen, Sakura
Silver Gelly Roll Pen, Sakura
Red Rhinestone Jewels, Stampin’ Up!
Scotch Tape

Real Red, Crumb Cake, Crushed Curry and Basic White Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 3”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team Inspiration Card using
Vacation Santa Set by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

Tri-Fold Shutter Card

July 21, 2023 Leave a comment

Hello Crafty Friends! Laurie here again! I am sharing my alternative Tri-Fold Shutter Card using the May 2023 Exploring In Color Paper Pumpkin Kit. I made one of these for Father’s Day (I will post it at the end) using the same kit but using a different card. It was a huge hit! So, I thought I would make one as a birthday card for a teenager who loves to camp!

The Details of My Card

For my fun-fold card, I used a full card base front and back from the Paper Pumpkin Kit. Loved that the card bases were printed with a continual scene from front to back! Therefore, with some careful measuring, this made it easy to create my card!

Since the PP card base is 5 ½” tall (same as my card base), I trimmed ¼” off top and bottom to make it fit onto my card base with mats. I didn’t mat the two centre scene strips since they were so thin already. They also have the fold from the PP card base in them, but you really don’t notice it.

Next, the stamped images were from the stamp set that came in the kit. I made the boots look like they were walking. Lol! Since the stamped pieces filled the space so nicely, I didn’t need to mat them.

Finally, the only things that I added to my card was the card base, some In Color card stock and Adhesive-Backed Solid Gems. The linen thread, binoculars and sentiment pieces were all from the kit.

Supplies:

Stamps: May 2023 Exploring In Color Paper Pumpkin Kit, Gone Fishing Stamp Set (For Father’s Day Card) (161535)

Inks: Copper Clay Spot (In Kit)

Paper: Very Vanilla 12” x 12” Cardstock (144239), Copper Clay (161721), Boho Blue (161724), Wild Wheat (161725), Pebbled Path (161722)

Accessories: Adhesive-Backed Solid Gems (161300), Rustic Metallic Adhesive-Backed Dots (For Father’s Day Card) (159082), Linen Thread (In Kit), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Stampin’ Seal (152813), Mini Glue Dots (In Kit)

Measurements:

Very Vanilla:
- 12” x 5 ½” (cut/scored according to template below
Copper Clay: (3 pieces)
- 1 ¾” x 5 ¼” (2 pieces)
- 2” x 3 ½”
Boho Blue:
- 2 ¼” x 1 ¾” (2 pieces)
- 2 ¼” x 3 ¾”
Wild Wheat:
- 1 ¼” x 1 ¾” (2 pieces)
Pebbled Path (3 pieces):
- 1 ¼” x 1 ¾” (2 pieces)
Card Pieces:
- 1” x 5” (2 pieces) (long vertical pieces)
- 1 ¼” x 3 ¾” (2 pieces) (long horizontal pieces)
- 2” x 1 ½” (2 pieces)

More Information on My Tri-Fold Shutter Card

Lastly, here is my Father’s Day Card using the May Exploring In Color Paper Pumpkin Kit. Same measurements as above, but a Basic White card base, different Paper Pumpkin card from the kit and Rustic Metallic Adhesive-Backed Dots. The sentiment is from the Gone Fishing Stamp Set.

Downloadable Tri-Fold Shutter Card Template

To download a PDF of the Tri-Fold Shutter Template, please click here or on the picture.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

You’re Stellar Wobble Card

July 5, 2023 Leave a comment

A card with an Astronaut and planet on it. — You’re Stellar Wobble Card

Hello Crafty Friends! Laurie here again! I am sharing my You’re Stellar Wobble Card using the Stargazing Suite Collection by Stampin’ Up! This Collection includes the Reach for the Stars Stamp Set, Reach for the Stars Dies and Stargazing 12” x 12” Designer Series Paper.

The Details of My Card

My card was for a swap, and I decided to make a fun faux centre-step card to allow enough room for the astronaut and a planet to fit on my centre panel. I used the measurements from my faux centre-step template which I have included at the end of this post.

When I saw this Suite in the Annual Catty, I knew that I wanted to make a wobble card as well! They are so fun and interactive! I bought the Mini Action Wobble on Amazon.ca, but you could easily make your own by using a piece of bendable wire and wrap it around a pencil. Then, secure one end to your wobble piece and the other end to the card base.

Astronaut in Action

Since I made this card for a swap, I needed several planets, but only a couple fit the planet die and the rings die. I really wanted to use the ring die with silver foil paper! I thought it would add some cosmic shimmer along with the die cut stars! So, I fudged it. Tip: if you die cut the larger planets, make sure that the shadow is showing in the centre of the die. This gives it a realistic 3D look.

All Cards with Different Planets — Swap Cards with Different Planets

I decided to stamp my astronaut and sentiment in Basic Gray since there was already a lot of black to my card. Besides, it was a good alternative to colouring the astronaut since I would have used Smoky Slate to colour his shadows and left most of him white anyways. So, this did it for me!

Tip: to figure out where to place glue for the centre panel, I used my grid paper a pencil to mark the section.

The only embellishments were three Classic Matte Dots in each colour tying in my colour scheme. Of course, they had to be in a row showing my Star Trekkie side of me! Lol!

I made another card as well for a friend. This time I added the retired Shimmery Crystal Effects to the astronaut’s helmet. So fun!

Supplies:

Stamps/Bundles/Dies: Stargazing Suite Collection (161189)

Inks: Basic Gray (149165)

Paper: Basic Black (121045), Basic White (159276), Lemon Lime Twist (144245), Silver Foil 12” x 12” Specialty Pack (156457), Stargazing 12” x 12” Designer Series Paper (in Collection)

Accessories: Classic Matte Dots (158146), Multipurpose Liquid Glue (110755), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683), Grid Paper (130148), pencil, Mini Action Wobble (from Amazon.ca)

Multiple cards with astronaut and planet on then — Swap Cards

Measurements:

Basic Black: (2 pieces)
- 8 ½” x 5 ½” cut/scored according to template below
- 8 ½” x 3” cut/scored according to template below
Basic White: (4 pieces)
- Sentiment: 2 ¼” x ½”
- Astronaut: 4” x 2”
- Centre Panel: 4-1/8” x 2-5/8”
- Back Panel: 3-5/8” x 3-1/8”
Lemon Lime Twist
- Scrap
Silver Foil (2 pieces):
- 2 ½” x 1”
- Stars: Scrap
Stargazing 12” x 12” Designer Series Paper (3 pieces):
- Centre Panel: 4” x 2 ½”
- Back Panel: 3” x 5 ¼”
- Planet

More Information on My You’re Stellar Wobble Card

Downloadable Faux Centre-Step Template

To download a PDF of the Faux Centre-Step Template, please click here or on the picture.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.