My Retirement Wishes Card 

My Retirement Wishes Card - A retirement card with a trailer and a sunrise in the background
My Retirement Wishes Card

Hello Crafty Friends! Laurie here again! I am sharing My Retirement Wishes Card using the Paradise Palms Stamp Set and the Tree Lot Dies by Stampin’ Up! with a beautiful Distressed Oxide Inks sunrise. I had a lot of fun creating this card for a friend who is retiring. She is planning to go touring for the summer with her trailer. So, I decided to create a fun pink (she is a pink kind of person) trailer on her card.

The Details of My Card

For my card, I decided to go with a mini slimline design so that I could really show off a beautiful sunrise with the Distress Oxide inks. Especially since this is all about driving off into the sunset to enjoy retirement! 

Using my Blending Brushes, I blended the sky colours together in the order of Fossilized Amber, Worn Lipstick, Wilted Violet, Broken China and Faded Jeans on a piece of Basic White card stock. Once that was done, I created a Crumb Cake sand hill with one of the Slimline Stitched Hillside Border Dies. I used this for placement as I stamped my palm trees and seagulls in Early Espresso onto my sky piece. Next, I adhered the sand hill down and die cut everything at the same time with a mini slimline stitched die. 

Close Up of Sunset
Close Up of Sunset

The sentiment was stamped in Black Onyx Versafine Ink and die cut with one of the flags from the Stylish Shapes Dies. Since I wanted this to hang over the edge of the sky piece and match up with my Basic White mat, I used my Paper Snips to cut off the edge.

Now, it was time to build my trailer with all the different dies. I loved this cute trailer once it was built! I also couldn’t resist adding some Pretty in Pink glimmer flags to match the trailer since we were celebrating!

Finally, the finishing touch was a couple of Pretty in Pink Shimmer Gems placed around my sentiment.

Close Up of Trailer
Close Up of Trailer

————————–

Card Recipe for My Retirement Wishes Card:

Paradise Palms Stamp Set, Stampin’ Up!
On the Horizon Stamp Set (seagulls), Stampin’ Up!
Tree Lot Dies, Stampin’ Up!
Large Mini Slimline Stackables, Lawn Fawn
Slimline Stitched Hillside Border Dies, Lawn Fawn
Stylish Shapes Dies, Stampin’ Up!
2024–2026 In Color Glimmer Specialty Paper, Stampin’ Up!
Blending Brush, Stampin’ Up!”
Fossilized Amber Distress Oxide Ink, Ranger
Worn Lipstick Distress Oxide Ink, Ranger
Wilted Violet Distress Oxide Ink, Ranger
Broken China Distress Oxide Ink, Ranger
Faded Jeans Distress Oxide Ink, Ranger
Early Espresso Classic Ink Pad, Stampin’ Up!
Black Onyx Versafine Ink, Tsukineko
2024–2026 In Color Shimmer Gems, Stampin’ Up!
Paper Snips, Stampin’ Up!
Pretty in Pink, Smoky Slate, Crumb Cake, Basic Black and Basic White Card Stock, Stampin’ Up!

Finished card size: 6 ¼” x 3 ¼”

————————–

Hope you liked My Retirement Wishes Card using the Paradise Palms Stamp Set and the Tree Lot Dies by Stampin’ Up! with a beautiful Distressed Oxide Inks sunrise.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Thank you for stopping by!

Hugs,
Laurie

My Happy Bee-Day Card 

My Happy Bee-Day Card - a little girl in a bee outfit with a large honey pot beside her.
My Happy Bee-Day Card

Hello Crafty Friends! It’s Laurie here! I am sharing My Happy Bee-Day Card as my Design Team Inspiration Card for Paper Nest Dolls using Lil Bee Amara! Isn’t she a cutie in her bee outfit with her little bee friend!

The Details of My Happy Bee-Day Card

For my card, I decided to use the Let It Bee Paper by Graphic 45. It was perfect for my bee theme with sunflowers and bees on it! Plus, all the words about bees made it a must!

Next, I coloured Amara and her sunflowers with my Copic markers. I had a lot of fun colouring her beautiful skin tone and her hair with all those curls!

I knew that I wanted to use the honey pot die with her. So, I die cut the honeycomb paper for the jar and decided to keep the top as Cherry Cobbler card stock so that her bee friend would show up well. The bee crystal sticker was from my stash and had been waiting for the perfect card. It fit perfectly on the honey pot letting everyone know it had honey in it.

For my card base, I used the Honeycomb Quilt Top Dies by Concord & 9th to add interest. I also tucked in some Honeycomb Clusters behind the honey pot.

The sentiment was heat embossed in white on Basic Black card stock and die cut out.

Finally, I added a scattering of red rhinestones and a paper sunflower to mirror my colour scheme and theme. I used Star Dust Stickles on the sunflower centres and her Bee Antenna-Headband and Clear Wink of Stella on her wings.

————————–

Copic Markers

Skin: E15/E13/E11/E00/E000/R20
Hair: C9/C7/C6/C4
Bee Outfit: Y38/Y35/Y32/C9/C7/C6/C4
Sunflowers: Y38/Y35/Y32/E79/E77/E74/E71
Sunflower Stems: YG67/YG63/YG03
Wings: B00/B000/B0000
Little Bee: Y38/Y35/Y32

Close Up of girl in Bee Outfit
Close Up of Lil Bee Amara

————————–

Card Recipe for My Happy Bee-Day Card

Lil Bee Amara, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Let It Bee Papercrafting Paper, Graphic 45
Honey Pot Fancy Dies, Hero Arts
Honeycomb Cluster Die, Taylored Expressions
Honeycomb Quilt Top Dies, Concord & 9th
Mini Strips – Bee Mine Stamp, Taylored Expressions
Mini Strips Flag Die, Taylored Expressions
Versamark Ink, Stampin’ Up!
White Embossing Powder, Stampin’ Up!
Heat Tools, Stampin’ Up!
Sunflower Paper Flower, The Paper Studio
Bee Crystal Sticker, Michaels Arts & Crafts, Mark Richards Enterprises Inc.
Red Rhinestone Basic Jewels, Stampin’ Up!
Star Dust Stickles, Ranger
Clear Wink of Stella, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 4”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team Inspiration Card using Lil Bee Amara by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

Birthday Blossom Wishes Card

Birthday Blossom Wishes Card - a birthday card with a little girl holding balloons
Birthday Blossom Wishes Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Birthday Blossom Wishes Card as my Design Team Inspiration Card for Conie Fong Art & Design using the beautiful Little Blossom. She is perfect for a birthday card for a special someone!

The purchase includes 3 Images:

  • 1 Image: Little Blossom Holding Balloons
  • 2 Image: Little Blossom
  • 3 Image: Little Blossom without background

The Details of My Birthday Blossom Wishes Card

I was given as a gift this beautiful handmade paper in rich reds and golds and knew I wanted to use it as a backdrop for Little Blossom on my card. So, I coloured her with my Copic markers in red and blacks with golds for the trim. I added green to the leaves on her dress and some of the balloons to break up the colours.

For my card, I had a gorgeous bloom border die from Paper Rose that looked like the flowers on her dress. So, I die cut Gold Foil Paper to match the golden trim on her dress. To add interest behind the bloom die, I embossed a piece of Basic White card stock with the Distressed Tile Embossing Folder. This gave it a slight texture without interfering with the beautiful golden flowers.

Next, I added a piece of floral black and white DSP to balance out the other side. Again, I thought the flowers looked similar to the flowers on her dress.

Now for my focal point! I used the beautiful handmade paper behind her and added some greenery to tie in the green balloons. The finishing touch was to add a few white blooms to brighten up my card. For the pearls in the centres, I coloured them with my Y38 Copic marker.

To add a sparkle, I added a scattering of Red Rhinestone and Clear Wink of Stella on her hair ties, the flowers and gold trim of her dress.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: C9/C7/C6
Eyes: E59/E57/E55/C3/C1/0
Lips: R20
Reds: R39/R37/R35
Blacks: C9/C7/C6
Yellows: E15/Y38/Y35/Y06
Greens: G99/G94/G21
Pearls: Y38

Close up of Little girl
Close up of Little Blossom

————————–

Card Recipe for My Birthday Blossom Wishes Card:

Little Blossom, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Lost & Found, Union Square 6” x 6” Paper Pad, My Mind’s Eye
Petal Passion Designer Series Paper, Stampin’ Up!
Gold Foil Sheets, Stampin’ Up!
Wedding Blooms Border Die, Paper Rose
Small Elegant Flourish Die, Paper Rose
Countryside Corners Dies, Stampin’ Up!
Distressed Tile 3D Embossing Folder, Stampin’ Up!
Hydrangea Punch, Martha Stewart
Iridescent Pearl Basic Jewels, Stampin’ Up!
Red Rhinestone Basic Jewels, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!

Cherry Cobbler, Garden Green, and Basic White Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Little Blossom for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

Just Me and My Puppy

Just Me and My Puppy - a card with a girl holding a puppy and and ice cream cone
Just Me and My Puppy

Hello Crafty Friends! It’s Laurie here! It is starting to feel like summer! So, I am sharing Just Me and My Puppy as my Design Team Inspiration Card for Paper Nest Dolls using Emmas Sweet Friend enjoying an ice cream cone together! 

The Details of Just Me and My Puppy

I just love this sweet digital stamp which reminded me of my puppy So, I coloured him with my Copic markers to look like my Jesse Pup. To match Jesse, I coloured Emma to look like me so that my card looked like my puppy and me! So fun!

For my card, I decided to use the Pampered Pooch Collection by Photo Play with its bright colours and puppy theme. Even the sentiment “furrever friends” is a sticker from that collection.

Next, I added a die cut white wooden fence using the Wood Textured Specialty Paper to add some interest to the background and balance out my card.

Since they are sharing an ice cream cone, I thought I would build a double scooped one with sprinkles and a heart rhinestone that I coloured red with my Copic marker. I even coloured the punched-out ice cream with my Copic markers to give it definition.

To balance out the ice cream cone, I added a MDF heart with a paw print inside which I placed beside my sentiment and layered a die cut heart beneath it.

Finally, for embellishments, I added a scattering of red rhinestones and used Clear Star Gelly Roll Pen for the dog tag.

————————–

Copic Markers

Skin: E04/E11/E21/E00/E000/R20
Hair: E37/E35/E33/E31
Pinks: R85/R83/R81 
Reds: R29/R27/R24
Puppy: E53/E51/E50
Greens: YG17/YG25/YG23/YG21
Sprinkles: B28/R27/Y13/YG25
Ice Cream/Sky: B00/B000/B000
Heart Rhinestone: R27

Close Up of the girl with her puppy
Close Up of Emma and her Friend

————————–

Card Recipe for Just Me and My Puppy

Emmas Sweet Friend, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Pampered Pooch 12” x 12” Collection Pack, Photo Play
Ice Cream Corner Designer Series Paper, Stampin’ Up!
Wood Textured Specialty Paper, Stampin’ Up!
Picket Fence Die-namics, My Favorite Things
Heart MDF Shape, Hunkydory
Two of Hearts Dies, Cheery Lynn Designs
Ice Cream Cone Builder Punch, Stampin’ Up!
Ice Cream Corner Sprinkles, Stampin’ Up!
Red Rhinestone Basic Jewels, Stampin’ Up!
Heart Rhinestone, From my Stash
Clear Star Gelly Roll Pen, Sakura

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 4”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team Inspiration Card using Emmas Sweet Friend by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

My Adventurous Birthday Card

My Adventurous Birthday Card - a birthday card with an airplane on it
My Adventurous Birthday Card

Hello Crafty Friends! Laurie here again! I am sharing My Adventurous Birthday Card using the Take to the Sky Suite Collection which includes the Adventurous Sky Bundle, Take to the Sky Designer Series Paper and the Industrial Trinkets by Stampin’ Up! I love this masculine Suite and decided to use it for a new Annual Catalogue Swap.

The Details of My Adventurous Birthday Card

For my card, I knew that I wanted to use the airplane dies to build my own airplane! One of the cards in the Annual Catalogue used DSP for the airplane’s body making it look like rivets. So, I decided to use that DSP and went with Copper Clay card stock for the other die piece for a “wooden” look. Plus, the Copper Clay matched the DSP flag behind the sentiment. Finally, I used a scrap of the tungsten colour from the Textured Metallic Specialty Paper which added a shimmer to the propeller.

Once my airplane was built, I worked on my sky by using the largest stitched circle from Stylish Shapes Dies to die cut my cloud DSP. I stamped the different clouds in Boho Blue, die cut them out and scattered them around my cloud DSP.

Next, I stamped the sentiment in Night of Navy and die cut it out with the flag from the Adventurous Sky Dies. This sentiment piece was layered on top of a DSP flag that tied in the colour scheme of the airplane.

All of this was mounted onto Night of Navy card stock that was embossed by the So Swirly Embossing Folder. Don’t you think that the swirls give the feeling of air currents and movement!

The finishing touch was a single Industrial Trinket added beneath the focal point.

Close Up of Airplane
Close Up of Airplane

Supplies:

Stamps/Bundles/Dies: Adventurous Sky Bundle (163447), Stylish Shapes Dies (159183)

Inks: Boho Blue Classic Stampin’ Pad (161650), Night of Navy Classic Stampin’ Pad (147110)

Paper: Thick Basic White (159229), Night of Navy (100867), Basic White (159276), Copper Clay (161721), Textured Metallic Specialty Paper (163772), Take to the Sky Designer Series Paper (163436)

Accessories: So Swirly Embossing Folder (163791), Industrial Trinkets (163450), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements: 

  • Thick Basic White:
    • 8 ½” x 5 ½” scored at 4 ¼”
  • Night of Navy:
    • 5 ¼” x 4”
  • Basic White (4 pieces):
    • Scraps for sentiment and clouds
  • Copper Clay:
    • 4” x 1 ½” (Plane)
  • Textured Metallic Specialty Paper:
    • Scrap for propeller
  • Take to the Sky Designer Series Paper (3 pieces):
    • 4” x 1 ½” (Plane)
    • 3” x 3” (Circle)
    • Scrap (Flag)

More Information on My Adventurous Birthday Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Birthday Shellabration Card 

Birthday Shellabration Card - a birthday card with a girl listening to a shell
Birthday Shellabration Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Birthday Shellabration Card as my Design Team Inspiration Card for Conie Fong Art & Design using the beautiful Seashell Rosealea. I love this image so much I have used her for another card awhile back. I will include a link at the end of this post to my other card.

The Details of My Birthday Shellabration Card

For my card, I decided to colour with my Copic markers Rosealea in Summer colours matching the Doodlebug papers. I had a lot of fun colouring her hair and all her beautiful shells! Once she was done, I used a blending brush to add some Crumb Cake “sand” along the edges.

To mirror her shells, I used a cluster of shell die cuts with other ocean elements in opposite corners. The starfish in the sentiment cluster was brushed with Peach Pie Ink to give it dimension and look like the starfishes in my colouring. I also brushed Crumb Cake Ink to the Basic White coral rounds to give them dimension and a sandy look. I couldn’t resist using a leaf trinket with my sentiment cluster to highlight it!

A border of shells peeking out behind her were embossed with my Embossing Mat to make the details really stand out. Then, I brushed Crumb Cake Ink to bring out the details even more. Tip: leave the die cut shells in the metal frame, brush the ink over the frame so that only the raised areas get the ink. This keeps the ink off the other areas making the raised areas stand out even more.

To add a sparkle, I added a scattering of Flat Adhesive-Backed Pearls, Clear Wink of Stella on the flowers and Star Dust Stickles to the pearls in her hair.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E25/YR24/Y26/Y21
Top: BG15/BG13/BG11
Eyes: G99/G94/G21/C3/C1/0
Lips: R83/R81
Starfishes: YR18/YR04/Y38/Y35
Shells 1: E15/E13/E11
Shells 2: E33/Y32
Pearls/Shells 3: BV000/BV13
Shells 4: R83/R81
Coral: E19/E18/E15
Flowers: R85/R53/R81/YR24/Y21
Leaves: G99/G94/G21

Close Up of girl holding shell
Close Up of Rosealea

————————–

Card Recipe for My Birthday Shellabration Card:

Seashell Rosealea, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Seaside Summer 6” x 6” Paper Pad, Doodlebug Design Inc.
Perennial Essence Vellum Cardstock, Stampin’ Up!
Build-an-Ocean Die Set, Whimsy Stamps
Seaside Wishes Dies, Stampin’ Up!
Joy! Crafts Shell Border Die
Embossing Mat, Stampin’ Up!
Manual Die Cutting Machine
Simple Strips – Birthday, Taylored Expressions
Simple Strips Die, Taylored Expressions
VersaFine Ink, Onyx Black, Tsukineko
Flat Adhesive-Backed Pearls, Stampin’ Up!
Tropical Oasis Trinkets, Stampin’ Up!
Crumb Cake Classic Ink, Stampin’ Up!
Peach Pie Classic Ink, Stampin’ Up!
Blending Brush, Stampin’ Up!
Star Dust Stickles, Ranger
Clear Wink of Stella, Stampin’ Up!

Coastal Cabana, Basic White, So Saffron, Peach Pie, Blushing Bride and Crumb Cake Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 5 ½”

————————–

Blog Challenges

I am entering this card into the following challenges:
613 Avenue CreateJune 2024-Anything Goes
Morgan’s ArtWorld Challenge#77-Anything GoesCreative Team’s Favourite Winner
A Place to StartJUNE 2024 – ANYTHING GOES w/Optional Twist: ANYTHING BUT A CARDTop Sprout
The Outlawz Challenges BlogJune 2024
A Perfect Time To Craft Open Challenge June, #6-20242nd Place
Dream Valley ChallengesChallenge # 318 – Summer ColoursWinner
Card making, Craft, Papercraft Scrapbooking Digi Choosday ChallengeWK 23 Anything Goes
Daisy Chain ChallengesChallenge #86 – Birthday

————————–

Here is my other card using this same stamp but facing right. For more information on my card, please click here.

A birthday card with a girl listening to a seashell
Seashell Wishes Card

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Seashell Rosealea for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

Magical Napkin Fold Card 

Magical Napkin Fold Card a fun fold card with a wizard on the middle
Magical Napkin Fold Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Magical Napkin Fold Card using Wiz by Mo’s Digital Pencil. Recently, the son of family friends celebrated his 13th birthday. Every year I try to make him an interactive card and this year I went with a Napkin Fold that he opens to reveal the wizard with a Push Button to turn the lights on the crystal ball. How fun is that!

The Details of My Magical Napkin Fold Card

I had coloured this image twice for another card. So, I had this one leftover and decided to use it for this birthday card. I used the same techniques for both cards. I will include a link to the other card with the instructions at the end of this post.

Glossy accents were added to the mystical crystal ball. I used a gelly roll pen on the mystical lightening arcing from the crystal ball. Clear Wink of Stella was added to the stars on his shirt, the gold band on his hat and the star hanging from his hat. To add some mystical particles, I used my splatter brush with Frost White All-Purpose Ink.

Close Up of Techniques
Close Up of Techniques

Next, I added the EZ-Light to the back of my coloured image placing them strategically with one behind the globe and the other two where the arcs of light ends. I secured them with scotch tape and added a lot of black dimensionals around the lights so that the light was focused where I wanted them, and the mechanism was hidden. The “Push” button was created on my computer and printed out. It was then coloured with my Copic markers to match the globe.

Card Laid Flat
Magical Napkin Fold Card Laid Flat

Napkin Fold

Once that was done, it was time to create my napkin fold card base. The papers were perfect for my magical theme especially the little wizards and spell sayings! Tip: cut the squares first and then cut the on the diagonal. I made sure that the words lined up on the diagonal cuts when I adhered them down.

Since my card was so thick, I need to create a belly band. So, I used more of the wizard paper along with stickers from the Pack. I punch two holes on the front and threaded the hemp cord through them.

Front of card with a band holding it closed
Front Belly Band

For the back of the belly band, I used a doodle-pop sticker of a castle with some fireworks and the Birthday Boy sticker from the Pack.

Back of card with band holding it close
Back Belly Band

Next, I stamped the sentiment in Gorgeous Grape ink and the stars in Crushed Curry onto the white card stock that was for the written message. I also created an easel so that the card can stand up when displayed.

Napkin Fold
Napkin Fold

Since my card was so bulky already, I just added some Cute Stars Adhesive-Backed Sequins to match my mystical theme.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04
Hair: C5/C3/C1
Purples: V17/V15/V12
Blues: B39/B28/B24
Yellows: Y17/Y15/Y02
Leather/Staff: E39/E37/E35/E33
Ground: E33/31
Magical Glow: Y02/Y000

Close Up of Wizard
Close Up of Wiz

————————–

Card Recipe for My Magical Napkin Fold Card:

Wiz, Mo’s Digital Pencil
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Dragon Dreams Collection Pack, Photo Play
Myth & Magic Specialty Designer Series Paper, Stampin’ Up!
Harry Potter Wizarding Worlds 12” x 2” Sheet, Paper House
99 % Isopropyl Alcohol
Q-tips
B39 Copic Refill
V17 Copic Refill
Tim Holtz Glass Media Mat, Tonic
EZ-Light, Pear Blossom Press
Scotch Tape
Tim Holtz Spatter Brush, Ranger
Frost White All-Purpose Ink, Tsukineko
Black Stampin’ Dimensionals, Stampin’ Up!
Clear Star Gelly Roll Pen, Sakura
Glossy Accents, Ranger
Clear Wink of Stella, Stampin’ Up!
Magical Day Stamp Set, Stampin’ Up!
Gorgeous Grape Classic Ink Pad, Stampin’ Up!
Crushed Curry Classic Ink Pad, Stampin’ Up!
Adventure Awaits Doodle-Pops Cardstock Stickers, Doodlebug Design Inc.
Cute Stars Adhesive-Backed Sequins, Stampin’ Up!
Hemp Cord, Hemptique
½” Whole Punch

Finished card size 5” x 5”

————————–

Here is my other card that I made using Wiz.

For more information on it and the technique I used for the background, please click here.

A Valentine card with a Wizard on it
Under Your Spell Card

To view my other Copic cards, please click here.

Hope you like my Magical Napkin Fold Card using Wiz by Mo’s Digital Pencil!

Thank you for stopping by!

Hugs,
Laurie

Best Father’s Day Card 

Best Father’s Day Card - a Father's Day card with two trees in a circle
Best Father’s Day Card

Hello Crafty Friends! Laurie here again! I am sharing my Best Father’s Day Card using The Best There Is May 2024 Paper Pumpkin by Stampin’ Up! 

The Details of My Alternative Cards

I had so much fun playing with the kit that I made the 3 cards in the kit. This kit’s wood grain textured designs are perfect for making masculine and all-occasion cards.

3 cards from the Kit
Cards in The Best There Is May 2024 Paper Pumpkin

In addition to them, I also made 6 alternative cards that included 3 thank you cards, a sympathy card, a birthday card and a Father’s Day card. For 4 of the cards, I also use the Add-on Thanks & Beyond Dies. Please see them below.

There thank you cards and sympathy card
My Alternative Cards

The Details of My Best Father’s Day Card

For my final two cards, I thought I would go into more in-depth details. I decided to create a Flippy Fun Fold card that was sure to wow! I made a Father’s Day card using the stamp in the kit and a birthday card using the Throughout the Year Stamp Set.

A Father's Day Card and Birthday Card
Best Father’s Day Card

The largest of the circles from the Stylish Shaped Dies fitted the preprinted tree circle perfectly with a nice border! So, I die cut the circle from the Misty Moonlight card base towards the top to leave enough space for my sentiment. Next, I die cut a circle from Early Espresso on which I mounted the preprinted tree circle.

Inside of My Best Father’s Day Card

For my inside, I cut and scored a Basic Beige card base according to the instructions below. I adhered this card base to the Misty Moonlight card base with the larger panel at the back and the smaller tab panel at the front. Note: make sure you only add glue to the top and bottom of the small tab panel. You will see the smaller tab panel showing through the die cut circle. Using my Paper Snips, I cut where the small tab panel over lapped the circle on the front and adhered that to the back of the larger panel thus hiding it.

Inside of Card
Inside of Card Flat

Next, I decorated the inside with the striped paper and the Early Espresso mats. For the Basic White panel, I stamped in Early Espresso the trees that came in the Kit to match the trees on the preprinted circle and then matted it with the Early Espresso mat.

Once the inside was done, I closed my card, added glue to only the part of the panel that can be seen through the die cut circle and adhered the Early Espresso circle in place.

Inside of Card Standing Up
Inside of Card Standing Up

Finally, I added a couple of strips to my sentiment piece to tie in the inside papers and to balance out my circle focal point.

The finishing touch was to add some Adhesive-Backed Textured Dots to my card.

Supplies:

Stamps/Bundles/Dies: The Best There Is Paper Pumpkin Refill Kit (165001), Throughout the Year Stamp Set (162312), Thanks & Beyond Dies (164397), Stylish Shapes Dies (159183)

Inks: Misty Moonlight Classic Stampin’ Pad (in Kit), Early Espresso Classic Stampin’ Pad (147114)

Paper: Basic White (159276), Early Espresso (119686), The Best There Is Paper Pumpkin Refill Kit (165001)

Accessories: Adhesive-Backed Textured Dots (163338), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Fop View of Card Showing Folds
Fop View of Card Showing Inside Folds

Measurements: 

  • Misty Moonlight Card Base (from Kit):
    • 8 ½” x 5 ½” scored at 4 ¼”
  • Basic Beige Card Base (from Kit):
    • 6-7/8 x 5 ½” scored at 2-1/8”, 4 ¼” and 6-3/8”
  • Basic White:
    • 1-5/8” x 5”
  • Early Espresso:
    • 1-7/8” x 5 ¼” (3 pieces)
    • 3 ¼” x 3 ¼”
  • The Best There Is Paper Pumpkin Refill Kit: 
    • 1-5/8” x 5” (Stripe Paper – 2 pieces)
    • ½” x 3” (Basic Beige Strip from Card Base)
    • ¼” x 3 ½” (Stripe Paper)
    • Preprinted Tree Circle

More Information on My Best Father’s Day Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store

My Mediterranean Hello Card 

My Mediterranean Hello Card - a card with oranges and tiles paper that says Hello
My Mediterranean Hello Card

Hello Crafty Friends! Laurie here again! I am sharing My Mediterranean Hello Card using the Citrus Blooms Bundle which includes the Citrus Blooms Stamp Set and the matching Citrus Blooms Dies by Stampin’ Up! I was keen to use this Bundle. So, I created this card was for a swap that I participated in on the weekend.

The Details of My Mediterranean Hello Card

For my card, I loved the tile look of the Mediterranean Blooms Designer Series Paper and thought it would be a striking background for the die cut oranges from the DSP!

So, I decided to use the largest die from the Citrus Blooms Dies to create a base for my focal point. For this Basic White piece, I used the Distressed Tile 3D Embossing Folder to add some texture and break up the white. This embossing folder went so well with my “tile” idea! 

To add even more interested, I stamped the tilework image in Boho Blue in opposite corners on the Boho Blue card base.

The finishing touches were a linen thread bow on the oranges and a scattering of Opal Rounds.

Close Up of oranges
Close Up of Focal Point

Supplies:

Stamps/Bundles/Dies: Citrus Blooms Bundle (163295), Stylish Shapes Dies (159183)

Inks: Boho Blue Classic Stampin’ Pad (161650), Night of Navy Classic Stampin’ Pad (147110)

Paper: Boho Blue (161724), Basic White (159276), Mediterranean Blooms Designer Series Paper (163284)

Accessories: Distressed Tile 3D Embossing Folder (162189), Opal Rounds Assortment (163298), Linen Thread (104199), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements: 

  • Boho Blue:
    • 8 ½” x 5 ½” scored at 4 ¼”
  • Basic White (2 pieces):
    • 5 ¼” x 4”
    • Scrap for Sentiment
  • Mediterranean Blooms Designer Series Paper (2 pieces):
    • 2” x 4-7/8”
    • Die Cut Oranges

More Information on My Mediterranean Hello Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

My Shellabrate Birthday Card 

My Shellabrate Birthday Card - a birthday card with a mermaid holding a seahorse on it
My Shellabrate Birthday Card

Hello Crafty Friends! It’s Laurie here! One final mermaid card for MerMay from me! I am sharing My Shellabrate Birthday Card as my Design Team Inspiration Card for Paper Nest Dolls using Mermaid Ellie with Seahorse

The Details of My Shellabrate Birthday Card

For my card, I decided to use the Mermaid Tales Collection Kit by Echo Park since it was perfect for my Mermaid theme! The Kit came with paper and stickers. So, I used the “Sparkle & Shine” sticker as well as the paper on my card. The Shellabrate flag was from the Mermaid Dreams Frames & Tags also by Echo Park.

Once I picked my papers, I used the colours from it to colour Ellie with my Copic markers. I used Clear Wink of Stella on her tail and on the fins of the seahorse to add some sparkle just like the sticker said!

Next, I added an angel fish die cut to match the fish in the paper, as well as a shell and seaweed beside the sticker to help ground her.

Finally, for embellishments, I added three dew drops that look like air bubbles to mirror the air bubble paper. I also added a black rhinestone for the fish’s eye.

————————–

Copic Markers

Skin: E04/E11/E21/E00/E000/R20
Hair: E49/E47/E44/E43
Purples: V17/V25/V22/V20 
Blues: BG53/BG57/BG78
Greens: YG67/YG63/YG03

Close Up of Mermaid with Seahorse
Close Up of Mermaid Ellie with Seahorse

————————–

Card Recipe for My Shellabrate Birthday Card

Mermaid Ellie with Seahorse, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Mermaid Tales Collection Kit, Echo Park Paper Co.
Mermaid Dreams Frames & Tags, Echo Park Paper Co.
Perennial Essence Vellum Cardstock, Stampin’ Up!
Build-an-Ocean Die Set, Whimsy Stamps
Angel Fish Die Set, Frantic Stamper Inc.
Crumb Cake Classic Ink, Stampin’ Up!
Blending Brush, Stampin’ Up!
Spring Blooms Dew Drops, The Robin’s Nest
Black Rhinestone Basic Jewels, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 4”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team Inspiration Card using Mermaid Ellie with Seahorse by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

My Wedded Bliss Card 

My Wedded Bliss Card - a wedding card with a couple on it
My Wedded Bliss Card

Hello Crafty Friends! It’s Laurie here! I am sharing My Wedded Bliss Card using the digital stamp Wedding Bells by Tiddly Inks Stamps! This past weekend, we celebrated a wonderful couple who tied the knot! 

The Details of My Wedded Bliss Card

For my card, I decided to colour with my Copic markers the couple on the card to look like the bridal couple who were getting married. I added Silver Gelly Roll Pen to the Bride’s tiara, her ring and the veil to tie in the silver embossed sentiment. Next, I used Clear Wink of Stella on her veil for even more sparkle.

The Lady’s Diary papers created an elegant look which tied in the masculine with the pinstripes and the feminine with the florals. The flowers and leaves were also punched out using the matching papers in the Lady’s Diary Pad.

Since this was a wedding card and I wanted an elegant look, I decided to emboss the sentiment before die cutting it out. I added a silver foil border to some leafy vellum that I tucked behind the sentiment. I also silver embossed the inside sentiment, added a silver foil border and a strip of the floral paper.

Inside of Card
Inside of Card

Finally, for embellishments, I added two heart charms, some silver metallic pearls to mirror the embossed silver accents and pearl jewels for the flower centres.

————————–

Copic Markers

Groom
Skin: E04/E11/E21/E00/E000
Hair: E49/E47/E44/E43/E42
Suit/Tie: B99/B97/B95/B93
Shirt: C3/C1/0

Bride
Skin
: E04/E11/E21/E00/E000/R20
Hair: C9/C7/C6/C4/C3
Dress/Veil: B000/B00/0/Silver Gelly Roll Pen
Necklace: B97/B95/B93/R85/Star Dust Stickles

Close Up of Bride & Groom
Close Up of Bride & Groom

————————–

Card Recipe for My Wedded Bliss Card

Wedding Bells, Tiddly Inks Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Lady’s Diary 6” x 6” Paper Pad, P13
Silver Foil Sheet, Stampin’ Up!
Vellum Basics 12” x 12” Specialty Designer Series Paper, Stampin’ Up!
Something Fancy Dies, Stampin’ Up!
Lifetime of Love Stamp Set, Stampin’ Up!
Special Celebrations Stamp Set, Stampin’ Up!
Versamark Ink, Stampin’ Up!
Silver Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
Hydrangea Punch, Martha Stewart
Leaf Punch, EK Success
Heart Charms, Stampin’ Up!
Festive Pearls, Stampin’ Up!
Pearl Basic Jewels, Stampin’ Up!
Silver Gelly Roll Pen, Sakura
Star Dust Stickles, Ranger
Clear Wink of Stella, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

I also made a Bridal Shower card a while back for the Bride-to-Be using Uptown Couple Emily and Ryan Under the Umbrella by Stamping Bella and thought I would share it here as well.

Bridal Shower Card with a couple kissing under an umbrella
Bridal Shower Card

To view my other Copic Marker cards, please click here.

I hope you liked My Wedded Bliss Card using the digital stamp Wedding Bells by Tiddly Inks Stamps!

Thank you for stopping by!

Hugs,
Laurie

My Let’s Catch Up Card 

My Let’s Catch Up Card - a card with two ladies enjoying coffees
My Let’s Catch Up Card

Hello Crafty Friends! Laurie here again! I am sharing My Let’s Catch Up Card using the Latte Love Bundle and the Coffee with Friends Stamp Set by Stampin’ Up! I thought it would be fun to combine them onto one card! They were just meant to be together! Lol!

The Details of My Let’s Catch Up Card

For my card, I decided to create a “polaroid” of the girls like a reminder for them to get together and catch up. As an alternative to colouring them, I embossed them with white embossing powder on Calypso Coral. Then, I die cut them out using the largest stitched square die from the Stylish Shapes Dies. I used Early Espresso for my first card but found it too dark (see top right card in photo below). So, I switched it up with the Calypso Coral. I tweaked another card (bottom) until I landed on my finished design (top left).

Different Variations of my Card
Different Variations of my Card

Since I made a “polaroid”, I had the perfect space to add the Lost Lagoon sentiment. For the Pecan Pie coffee drips, I stamped off before stamping them onto the Basic White so that they didn’t interfere with the other elements.

I loved that one of the Latte Love Dies cut out the coffee cups in the DSP! I made this card for a swap, and I had different coffee cups on my cards!

My Swap Cards
My Swap Cards

Next, I added a plaid flag with the Stylish Shapes Dies that had Calypso Coral in it to tie in my colour scheme and to balance the coffee cup.

I decided to place my focal point at an angle to fit all my elements onto the card. I layered this onto a piece of Pecan Pie that I embossed with the Painted Texture 3D Embossing Folder. You could also use the new So Swirly Embossing Folder, but I didn’t have that yet. Lol! Another piece of the DSP was placed so that it just peeked out from behind the focal point and tied in the Lost Lagoon colour.

Finally, I finished the card with a few Adhesive-Backed Swirl Dots to add a fun element to my card.

Supplies:

Stamps/Bundles/Dies: Latte Love Bundle (163461), Coffee with Friends Stamp Set (161389), Stylish Shapes Dies (159183)

Inks: Lost Lagoon (161678), Pecan Pie (161665), VersaMark Ink (102283)

Paper: Thick Basic White (159229), Lost Lagoon (133679), Pecan Pie (161717), Basic White (159276), Calypso Coral (122925), A Little Latte Designer Series Paper (163453)

Accessories: Adhesive-Backed Swirl Dots (163464), Painted Texture 3D Embossing Folder, (154317), Basics Embossing Powder (165679), Heat Tool (129053), Embossing Additions Tool Kit (159971), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of My Focal Point
Close Up of My Focal Point

Measurements: 

  • Thick Basic White:
    • 8 ½” x 5 ½” scored at 4 ¼”
  • Lost Lagoon:
    • 5 ¼” x 4”
  • Pecan Pie:
    • 3-7/8” x 5-1/8”
  • Basic White:
    • 4” x 3 ¼”
  • Calypso Coral:
    • 3” x 3”
  • A Little Latte Designer Series Paper (3 pieces):
    • 4” x 3 ¼”
    • Scrap for flag
    • One of the cups

More Information on My Let’s Catch Up Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Aim to Misbehave Card 

Aim to Misbehave Card - a space birthday card
Aim to Misbehave Card

Hello Crafty Friends! It’s Laurie here to share my Aim to Misbehave Card using Space Western Stamp Set by Kindred Stamps! This card was for a good friend’s birthday. I know he loves the TV show Firefly and the movie Serenity! So, I knew this stamp set would be perfect for him!

The Details of My Aim to Misbehave Card

For my card, I wanted to include all the characters on his card. So, I went with a fun fold that is called an Accordion fold which is a booklet that unfolds like an accordion! I have included a video at the end to show my card in action.

Card with out Belly Band
Card with out Belly Band

But first, I coloured all the characters with my Copic markers. Then, I cut them out with my Brother Scan n’ Cut. Once that was done, I built my booklet using the Accordion Template that I have included at the end of this post. I also created a belly band with the ship to keep my card closed.

Band to hold card shut
Belly Band

Next, I decorated the pages with the Stargazing Designer Series Paper by Stampin’ Up! Perfect for my space theme! I even used the Reach for the Stars Dies by Stampin’ Up! for the Holographic stars and for my planet on the belly band.

Front of Card Fully Open
Front of Card Fully Open

I used three sentiments from the stamp set and I created the one on the inside with my computer and printed it out.

Inside of Card
Inside of Card

Since the card was so bulky already, the only embellishments I added were a scattering of Holographic die cuts throughout the booklet.

————————–

Copic Markers:

Kaylee
Skin
: E000/E00/E21/E11/E04/R20
Hair: E49/E47/E44/E43
Overalls: YG99/YG97/YG95 
Shirt: RV17/RV13/E11
Boots: E39/E37/E35 
Wrench: C3/C1

Kaylee - Mechanic
Kaylee, the Mechanic

Wash
Skin
: E000/E00/E21/E11/E04
Hair: E25/YR24/Y26/Y21
Overalls: YG99/YG97/YG95 
Shirt: C3/C1/YG97
Shoes: E39/E37/E35 
Dinosaurs: YG67/YG63/YG03

Wash, the Pilot
Wash, the Pilot

Inara
Skin
: E57/E55/E53/E51
Hair: C9/C6/C4/C3
Dress: E09/E08/E07 
Dress Trim: Gold Gelly Roll Pen

Inara, the Companion and River, the Warrior
Inara, the Companion and River, the Warrior

River
Skin
: E000/E00/E21/E11/E04/R20
Hair: E18/E17/E15/E13
Outfit: YG99/YG97/YG95
Shoes: E39/E37/E35 
Weapons: C3/C1

Jayne
Skin
: E000/E00/E21/E11/E04
Hair: E49/E47/E43
Shirt: YG99/YG97/YG95
Hat: YR04/YR02/YR01/YR07/YR09
Shoes: E39/E37/E35 
Socks: C6/C3
Pants: E33/E31/E30
Boots/Belt: E39/E37/E35
Weapon: C6/C3

Jayne, the Fighter and Zoë, the Soldier
Jayne, the Fighter and Zoë, the Soldier

Zoë
Skin
: E15/E13/E11/R20
Hair: E49/E47/E44/E43
Shirt: YG99/YG97/YG95
Vest: E09/E08/E07
Shoes: E39/E37/E35 
Pants: E33/E31/E30
Boots/Belt: E39/E37/E35
Weapon: E39/E37/C3/C1

Mel, the Captain
Mel, the Captain

Captain
Skin
: E000/E00/E21/E11/E04
Hair: E39/E37/E35/E3
Shirt: E09/E08/E07
Pants: E33/E31/E30
Jacket: E18/E15/E13
Boots: E39/E37/E35 
Gun: C6/C3
Suspenders: E39
Belt: E39/E37/E35

Serenity, the Space Ship
Serenity, the Space Ship

Serenity Ship
C6/C4/C3/C1/Y21/Y36
B000/B00

————————–

Card Recipe for My Aim to Misbehave Card:

Space Western, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Reach for the Stars Dies, Stampin’ Up!
Stargazing Designer Series Paper, Stampin’ Up!
Holographic Trio Specialty Designer Series Paper, Stampin’ Up!
Tuxedo Black Memento Ink, Stampin’ Up!
Brother Scan n’ Cut
Stitched Rectangle Dies, Stampin’ Up! 
Metal Plate 3D Embossing Folder, Stampin’ Up!
Gold Gelly Roll Pen, Sakura
Glossy Accents, Ranger
Starry Sky, Basic White and Basic Gray Card Stock Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

Downloadable Accordion Card Template

To download a PDF of the Accordion Card Template, please click here or on the picture.

Accordion Card Template
Accordion Card Template

For more of my Kindred Stamps Copic cards, please click here.

Hope you like my Aim to Misbehave Card using the
Space Western Stamp Set by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

Welcome Little One Card

Welcome Little One Card - a baby card with a girl holding a bird nest with a baby bird in it
Welcome Little One Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Welcome Little One Card as my Design Team Inspiration Card for Paper Nest Dolls using Avery with Bird Nest. We discovered a bird nest with some robin eggs on one of our outdoor lights. So, I couldn’t resist creating a card around this miracle! I even used a photo of the eggs in the nest on my card!

The Details of My Welcome Little One Card

For my card, I decided to colour with my Copic markers Avery in similar colours to the eggs and nest but went with a bright red hair for all those gorgeous curls!

Next, I die cut the printed photo with a stitched circle die. I used this same die for all three layers of my “nest” so they would line up when layered. The top two offset layers consisted of leaves in two different greens to add dimension. I also added a few sprigs of leaves emanating from my nest.

I used the border leaf die on the darker DSP behind Avery to tie in my theme and make her stand out from the other DSP.

The sentiment was stamped in Balmy Blue, and one end was cut at an angle with my Paper Snips.

Finally, for embellishments, I added three birds from the Adhesive-Backed Dragonflies & Birds for a bit of sparkle.

————————–

Copic Markers

Skin: E04/E11/E21/E00/E000/R20
Hair: R08/YR07/YR14/YR21
Blues: BG02/BG01/BG000
Greens: YG67/YG63/YG03
Browns: E35/E33/E31/E30
Bird: BG02/BG01/BG000/W3/W1/W00

Close Up of girl holding bird nest
Close Up of Avery

————————–

Card Recipe for My Welcome Little One Card

Avery with Bird Nest, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Spring Garden 12” x 12” Paper Collection, Paper Rose
Flight & Airy 12” x 12” Designer Series Paper, Stampin’ Up!
Stitched Layering Circle Dies, Memory Box
Birds & More Dies, Stampin’ Up!
Cradled in Love Stamp Set, Stampin’ Up!
Balmy Blue Ink Pad, Stampin’ Up!
Adhesive-Backed Dragonflies & Birds, Stampin’ Up!
Paper Snips, Stampin’ Up!
Computer and Printer
Calypso Coral, Granny Apple Green, and Garden Green Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 4”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team Inspiration Card using Avery with Bird Nest by Paper Nest Dolls!


Thank you for stopping by!

Hugs,
Laurie

My Welcome MerMay Card 

My Welcome MerMay Card - a mermaid in an underwater scene
My Welcome MerMay Card

Hello Crafty Friends! It’s Laurie here! I am sharing My Welcome MerMay Card using the new release Little Mermaid by Conie Fong Art & Design as my Design Team Inspiration Card. Every May is MerMay in the card making industry and Conie Fong didn’t disappoint with this new release! Welcome to MerMay!

The Details of My Welcome MerMay Card

For my card, I decided to create a mini slimline card with an underwater scene for this cutie. The Mermaid Tales paper had a scene that was perfect for my background! Behind that I added paper with blue/green mermaid scales with golden accents and gold foil borders.

But first, I coloured my mermaid with my Copic markers in watery blue/green colours to match my scene. I had a lot of fun colouring the tail so that it shimmers between the blues to the greens! To add more shimmer, I used Clear Wink of Stella on her tail and Clear Star Gelly Roll Pen on her starfish in her hair. 

Next, I die cut the sandy bottom with the Slimline Stitched Hillside Border and used the Subtle 3D Embossing Folder to give it some texture. Once that was done, I brushed Crumb Cake ink along the edges for even more texture.

To create a backdrop for her, I die cut a Basic White shell on which I brushed Crumb Cake to bring out the detail. Behind that, I added a gold fold die cut coral to tie in my golden accents.

The sentiment flag was from the Mermaid Dreams Frames & Tags and was perfect for my card! I layered beneath it another die cut flag with gold shells on it. Even more gold accents! Lol! All these golden accents really added a beautiful sparkle to the card!

The finishing touch was a scattering of dew drops which I thought looked like air bubbles.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E25/YR24/Y26/Y21
Top: YG67/YG23/YG00
Tail: BG09/BG05/BG01/YG23/YG00/Clear Wink of Stella
Starfish: Y38/YR04/YR18/Clear Star Gelly Roll Pen

Close Up of Little Mermaid
Close Up of Little Mermaid

————————–

Card Recipe for My Welcome MerMay Card:

Little Mermaid, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Mermaid Tales Collection Kit, Echo Park Paper Co.
Enchanting Paper Pad, Recollections, Michael’s Arts & Crafts
Gold Foil Sheets, Stampin’ Up!
Mermaid Dreams Frames & Tags, Echo Park Paper Co.
Build-an-Ocean Die Set, Whimsy Stamps
Slimline Stitched Hillside Border, Lawn Fawn
Banners Framelits Dies, Stampin’ Up!
Subtle 3D Embossing Folder, Stampin’ Up
Crumb Cake Classic Ink, Stampin’ Up!
Blending Brush, Stampin’ Up!
Spring Blooms Dew Drops, The Robin’s Nest
Clear Star Gelly Roll Pen, Sakura
Clear Wink of Stella, Stampin’ Up!
Granny Apple Green, Basic White, and Crumb Cake Card Stock, Stampin’ Up!

Finished card size: 3 ½” x 6-1/8”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Little Mermaid for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie