Christmas Card - Stamp With Laurie

My Aloha Santa Card

September 15, 2023 4 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing My Aloha Santa Card for as my Design Team Inspiration Card for Paper Nest Dolls using Vacation Santa Set. There are 7 stamps, which include Surfer Santa, Ice-cream Santa, Santa with Reindeer Floatie, Santa & Mrs. Claus, Palm Tree and Flamingo & Gifts, that come in both rubber and digital stamps. I made cards with Ice-cream Santa and Santa with Reindeer Floatie from this set as well and will include a link to them at the end of this post.

The Details of My Aloha Santa Card

For my card, I thought to create an Aloha card since Hawaii is the perfect place for Santa to take a vacation before his busy time of year! Lol!

Once Santa was coloured with my Copic markers in bright vacation colours, I placed him on a stitched circle cut out from paper that looked like pool water. I thought it would be fun to place the “pool” off-centred on the card and trim a small piece off the one edge.

Don’t you just love the sparkle of the Aloha sticker, and it pulls out the orange that I used in my colouring! Of course, if Santa is in the land of paradise, he needs a sunny day to folic in the pool! Hence the die cut sun behind the Aloha. Lol!

For my card base, I used green DSP for my palm die cut frame and then some orange DSP with flowers behind it to add to my colour scheme. To mirror the palm die cut, I used a paper palm leaf in one corner.

I added some Star Dust Stickles to Santa’s hat trim, white Gelly Roll Pen for the shine on his floatie and Glossy Accents to Rudolph’s nose. Finally, for embellishment, I used a few sprinkles to match the colours of my card.

————————–

Copic Markers

Skin: E15/E13/E11/E00/E000
Beard: C3/C1/C0
Reds: R29/R27/R24/R22
Oranges: YR09/YR07/YR04/YR02
Reindeer: E35/E33/E31/E30/E31/E53/E51/E50/R29/R27/R24
Coconut Drink: R85/R83/R81/C3/C1/0/E33/E31/E30/E53/E51/E50

Close Up of Santa floating in a pool — Close Up of Santa

————————–

Card Recipe for My Aloha Santa Card

Vacation Santa Set, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Island Oasis 12” x 12” Designer Series Paper, Stampin’ Up!
Make a Splash Collection 6” x 6” Paper Pad, BoBunny
Spring Showers Dies, Lawn Fawn
Stitched Circle Layering Dies, Memory Box
Palm Leaf Frame Die, Paper Roses
Summer Glitter Assortment Sprinkles, Doodlebug Design Inc.
Paper Palm Leaves, The Paper Studio
Aloha Sticker, Crafter’s Square
White Gelly Roll Pen, Sakura
Star Dust Stickles, Ranger
Glossy Accents, Ranger
Tahitian Tide Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 3”

————————–

My Other Cards Using this Set

For more information on my card, please click here or on the photo.

A Christmas Card with Santa on a floatie in a pool. — My Interactive Tubing Santa Card

A card with Santa on a beach eating ice cream — Santa on Vacation Card

Hope you like my Design Team Inspiration Card using
Vacation Santa Set by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

My Poinsettia Christmas Card

July 31, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here! I’m squeezing in one final Christmas in July card for you today! I am sharing My Poinsettia Christmas Card as my Design Team Inspiration Card for Conie Fong Art & Design using the beautiful Christmas Leilani.

The Details of My Card

I loved colouring with my Copic markers Leilani, especially all that gorgeous hair! I matched my colouring of the flowers to the beautiful Poinsettia Garden Paper Collection by Paper Roses that I just purchased on a road trip with friends! So, I went with a deep red for the poinsettias, a blue/green for the succulents and white for the other flowers. Tip: for contrast with the reds, add C5 to the deepest shadows to make the individual petals pop.

Once she was coloured, I knew that I wanted to use the pretty Poinsettia Border Die also by Paper Roses. This was purchased on the same road trip as the paper. I loved how the die is so delicate while allowing the Paper Roses smaller poinsettia paper to peek through.

Next, I added a border of pretty lace to mark my transition between the die and the other side of the card. I used a piece of the Paper Roses paper with larger poinsettias on it as a backdrop for Leilani. Since this is a Christmas card, I thought a gold edge to it would tie in nicely to the other gold accents.

The sentiment was heat embossed in gold and matted with Cherry Cobbler. To continue the gold theme, I added a gold die cut filigree below it.

Then the paper poinsettias were added around her. The gold centres mirror the gold Gelly Roll Pen that I used on the poinsettias in my colouring.

Finally, the finishing touch was a couple of gold glitters dots placed around my focal point of Leilani.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E29/E27/E25/E23/E21
Eyes: BG99/BG96/BG93/BG90/C3/C1/0
Lips: R32/R20
Poinsettias: R39/R37/R35/C5/ Gold Gelly Roll Pen
White Flowers: C3/C1/0/Gold Gelly Roll Pen
Green Succulents: BG99/BG96/BG93/BG90

————————–

Card Recipe for My Poinsettia Christmas Card:

Christmas Leilani, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Poinsettia Garden 12” x 12” Paper Collection, Paper Roses
Poinsettia Garden – Watercolours 12” x 12” Paper Collection, Paper Roses
Gold Foil Sheet, Stampin’ Up!
Poinsettia Border Die, Paper Roses
Cherish the Season Stamp Set, Stampin’ Up!
Painted Labels Dies, Stampin’ Up!
VersaMark Ink, Stampin’ Up!
Gold Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
2” Lace Ribbon, Celebrate It, Michael’s Arts & Crafts
Poinsettia Paper Flowers, Christmas Paper Crafts, Hobby Lobby
Gold Glitter Enamel Dots, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!
Gold Gelly Roll Pen, Sakura
Glossy Accents, Ranger
Cherry Cobbler Card Stock, Stampin’ Up!

Finished card size: 6 ½” x 5”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Christmas Leilani for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

My Sliding Santa Card

July 28, 2023 2 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing My Sliding Santa Card for Christmas in July and as my Design Team Inspiration Card for Paper Nest Dolls using the Vacation Santa Set. There are 7 stamps, which include Surfer Santa, Ice-cream Santa, Santa with Reindeer Floatie, Santa & Mrs. Claus, Palm Tree and Flamingo & Gifts, that come in both rubber and digital stamps. I made a card with Ice-cream Santa from this set as well and will include a link to it at the end of this post.

The Details of My Card

For my card, I decided to create fun interactive slider card using Santa with Reindeer Floatie. I had so much fun colouring this cutie with my Copic markers! In fact, I coloured two of him and will use the second version on another card. I added some white Gelly Roll Pen to his floatie and Rudolph’s nose to give them a shine.

Next, I wanted to see the different layers of the papers behind him. So, I used two different slimline die sets. I picked a water-like paper for the slider piece as if he is going down a river twirling around like at one of those amusement parks. Lol! I kept the cut-out piece from the slider die and glued it through the hole onto the layer below it so that you couldn’t see the orange layer below. This added to my pool like feel.

I used some slider discs to create my slider, but in the past, I have also used pennies. I made sure that my dimensionals were round so that I could get him spinning around. There is a good video by Taylored Expressions on making a slider card using their discs. I followed it to create my slider part. I will add a link at the end of this post.

My Sliding Santa Card in Action

I decorated my card using some Christmas Chit Chat pieces. I popped up the sentiment ones making sure that my Santa would not get caught on them. A couple of matching glitter dots were added to add some sparkle.

————————–

Copic Markers

Skin: E15/E13/E11/E00/E000
Beard: C3/C1/C0
Reds: R29/R27/R24/R22
Greens: YG67/YG63/YG03
Reindeer: E35/E33/E31/E30/E31/E53/E51/E50/R29/R27/R24
Coconut Drink: R85/R83/R81/C3/C1/0/E33/E31/E30/E53/E51/E50

Close Up of Santa on the floatie — Close Up of Santa on reindeer Floatie

————————–

Card Recipe for My Sliding Santa Card

Vacation Santa Set, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Beach Party 12” x 12” Paper Pad, Carta Bella
Christmas Magic Chit Chat, Doodlebug Design Inc.
Small Slimline with Lift Flaps Dies, Lawn Fawn
Large Slimline with Slider Dies, Lawn Fawn
On the Right Track Discs, Taylored Expressions
Glitter Enamel Dots, Stampin’ Up!
White Gelly Roll Pen, Sakura
Pop-Dot Adhesives, Forever in Time
Granny Apple Green Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 3 ½”

Stamp Size: 3”

————————–

For More Information On My Sliding Santa Card

To view my other Paper Nest Dolls cards, please click here.

Link to Taylored Expressions Slider card: https://www.youtube.com/watch?v=PeyVQAvFKmc

Hope you like my Design Team Inspiration Card using
Vacation Santa Set by Paper Nest Dolls!

My Santa on Vacation Card

For more information on my card, please click here or on the photo.

Thank you for stopping by!

Hugs,
Laurie

Santa on Vacation Card

July 25, 2023 2 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing my Santa on Vacation Card for Christmas in July and as my Design Team Inspiration Card for Paper Nest Dolls using Vacation Santa Set. There are 7 stamps, which include Surfer Santa, Ice-cream Santa, Santa with Reindeer Floatie, Santa & Mrs. Claus, Palm tree and Flamingo & Gifts, that come in both rubber and digital stamps.

The Details of My Card

For my card, I decided to create a summer beach scene with Santa enjoying his ice cream! I coloured Santa and the palm tree with my Copic Markers. I love that he has a candy cane in his ice cream! Lol! I added Glossy Accents to his glasses and the light bulbs on the palm tree. For the palm tree, I used Clear Star Gelly Roll Pen to make the star sparkle and Silver Gelly Roll Pen on the wires for the lights.

Next, onto the scene building! The sky was created with watercolor paper and blending two blue Distress Oxide Inks onto it with my blending brush. Then, I used my splatter brush to splatter water to create some texture. Once that was done, I die cut some sand dunes and embossed them to give them the texture of sand. Finally, the sun and cloud were added to finish off my scene.

For the sentiment, I wanted just “Merry and Bright” even though the sentiment was “May Your Days be Merry and Bright”. So, I used Scotch Tape (you could also use a post-it note) to mask off the text that I didn’t want. Remember to remove the tape before you stamp though! Once the sentiment was stamped, I heat embossed it in white and die cut it out.

My beachy scene was added to a piece of Make A Splash paper that had palm trees in a bright greens and blue sky to mirror my scene.

The only embellishments added were some red rhinestones scattered around my focal point.

————————–

Copic Markers

Santa
Skin: E15/E13/E11/E00/E000
Beard: C3/C1/C0
Reds: R29/R27/R24/R22
Greens: YG67/YG63/YG03
Ice Cream Cone: E35/E33/E31
Ice Cream: R85/R83/R81/E35/E33/E31/E53/E51/E50

Close up os Santa eating an ice cream cone — Ice-Cream Santa

Palm Tree
Trunk/Coconuts: E35/E33/E31/E30
Leaves: YG67/YG63/YG03
Wire: C3/C1/C0
Red Light Bulbs: R29/R27/R24
Green Lights Bulbs: YG67/YG63/YG03
Blue Lights Bulbs: B28/B24/B32
Yellow Lights Bulbs/Star: Y38/Y35/Y32

Card Recipe for My Santa on Vacation Card

Vacation Santa Set, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Make a Splash 6” x 6” Paper Pad, Bo Bunny
Watercolor Paper, Stampin’ Up!
Stitched Circle Layering Dies, Memory Box
Slimline Stitched Hillside Border Dies, Lawn Fawn
Spring Showers Dies, Lawn Fawn
Stylish Shapes Dies, Stampin’ Up!
Subtle Textured Embossing Folder, Stampin’ Up!
Simple Strips – Christmas, Taylored Expressions
Versamark Ink Pad, Stampin’ Up!
White Embossing Powder, Stampin Up!
Heat Tool, Stampin’ Up!
Salty Ocean Distress Oxide Ink, Ranger
Tumbled Glass Distress Oxide Ink, Ranger
Blending Brush, Stampin’ Up!
Tim Holtz Splatter Brush, Ranger
Glossy Accents, Ranger
Clear Star Gelly Roll Pen, Sakura
Silver Gelly Roll Pen, Sakura
Red Rhinestone Jewels, Stampin’ Up!
Scotch Tape

Real Red, Crumb Cake, Crushed Curry and Basic White Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 3”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team Inspiration Card using
Vacation Santa Set by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

Rudolph Red-Nose Reindeer Card

July 7, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here! I am sharing my Rudolph Red-Nose Reindeer Card as my Design Team Inspiration Card for Conie Fong Art & Design using Reindeer Lights and Sentiment. The Design Team are celebrating Christmas in July at Conie Fong Art & Design Facebook Group with a 25% off sale for 3 days, July 7, 8 and 9, 2023. No coupon code needed. Visit the Etsy store at https://www.etsy.com/shop/ConieFongArt.

The Details of My Card

For my card, I found some fun Christmas lights paper with matching papers to use on my card. Once I decided on them, I coloured the reindeer in the same colours to match. I trimmed him out with my Brother Scan n’ Cut. Then, I added glossy accents to the light bulbs and Star Dust Stickles to his hat trim.

I thought it would be fun to make the reindeer’s nose glow just like Rudolph’s nose! I love an interactive card with a light switch that you push! So, I used a light mechanism from Pear Blossom Press and strategically placed it under the green piece of paper. Once I did that, I poked a hole through the green paper right where I planned to place the reindeer’s nose. I used extra thick dimensionals on the green piece to allow enough space for the light mechanism. The “Push” circle was done on my computer, printed out and then punched with a ¼” punch.

The sentiment was from the stamp set and die cut with a Stitched Rectangle Die. To balance out my card, I added some foil die cut light bulbs in matching colours to Rudolph’s light bulbs. The die cut black piece was from the light bulb die set to hang lights off, but I thought it added some fun at the top so that it looks like my focal point it being held up by it.

The finishing touch was adding some red rhinestones with one on the “Twinkle” and a couple beside the die cut light bulbs!

————————–

Copic Markers:

Fur: E37/E35/E33/E31/W3/W1/0/R20
Antlers: E74/E71/E70
Eyes: W3/W1/0
Hoofs/Plug: C6/C4/C3
Reds: R39/R37/R35/C5
Blues: B28/B24/B32
Greens: YG67/YG63/YG03
Yellows: Y38/Y35/Y32

Close Up of reindeer — Close Up of Rudolph

————————–

Card Recipe for My Rudolph Red-Nose Reindeer Card:

Reindeer Lights and Sentiment, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Gnome for the Holidays Christmas, Photo Play
Red, Green and Blue Foil Sheets, Craft Perfect, Tonic
3 pack of One Light, Pear Blossom Press
String of Lights, Frantic Stamper Inc.
Deckled Rectangles Dies, Stampin’ Up!
Stitched Rectangle Dies, Stampin’ Up!
Brother Scan n’ Cut
¼” Inch Punch, Stampin’ Up!
Take You Pick Tool, Stampin’ Up!
3 D Foam Squares (.25” x .25” x .08”), Scrapbook Adhesives
Red Rhinestone Jewels, Stampin’ Up!
Star Dust Stickles, Ranger
Glossy Accents, Ranger
Poppy Parade and Basic Gray Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Reindeer Lights and Sentiment for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

We Believe in Santa

December 24, 2022 Leave a comment

A Christmas card with a girl and boy and Santa going up the chimney. — We Believe in Santa

Hello Crafty Friends! Merry Christmas! It’s Laurie here! I am sharing my We Believe in Santa as my Design Team Inspiration Card for Paper Nest Dolls using Christmas Eve Bundle. This Bundle includes 11 Digital Stamps to make the perfect Christmas Eve scene, or fantastic Christmas Cards. I used 7 of them on this card!

The Details of My Card

For my card, I wanted to create a clean and simple Christmas Eve scene and what better way than with a mini slimline card! I used Word to scale and place all my characters where I wanted them and printed it out. Once that was done, I coloured them with my Copic markers. The only thing add was a sentiment that I die cut and popped up with a few rhinestones.

I also added some stickles to Santa’s trim and the Christmas Tree star, as well as, glossy accents to the ornaments and candle flames.

————————–

Copic Markers:

Girl
Skin: E000/E00/E21/E11/E04/R20
Hair: E29/E27/E25/E23
PJs: R89/R85/R83/R81
Slippers: E33/E31/R27/E42
Teddy: E37/E35/E33/E31/B97/B95/Black Gelly Pen

Boy and Girl holding teddies — Boy and Girl

Boy
Skin: E000/E00/E21/E11/E04/R20
Hair: E57/E55/E43/E53
PJs: B99/B97/B95/B93/B91
Slippers: C6/C4/C2/C1/YR18/R27
Teddy: E37/E35/E33/E31/Black Gelly Pen

Fireplace
Bricks: C9/C6/C4/C2
Reds: R29/R27/R24
Greens: G28/YG17/YG03
Mantel: E27/E23
Candles: C3/0/Y38/Y15/Y11/YR18

Fireplace with Santa going up chimney — Fireplace with Santa

Santa
Reds: R89/R29/R24
Blacks: C9/C6/C4
White Trim: C3/C1/Stickles

Dog
Dog: E29/E27/E25/E23
Pillow: R59/R29/R27/R24
Nose: Black Gelly Pen

Christmas Tree
Reds: R29/R27/R24
Greens: G28/YG17/YG03
Blues: B97/B93/B91
Pinks: R89/R83/R81
Yellows: Y38/Y15/Y11
Tree Trunk: E27/E23
Star: Y17/Y15/Y11/Stickles
Popcorn: Y11/0
Tree Base: C6/C4/C2

Christmas Presents
Red: R29/R27/R24/G28/YG17/YG03
Blue: B97/B95/B91/Y17/Y15/Y11
Pink: R89/R83/R81/G28/YG17/YG03
Yellow: Y17/Y15/Y11/B97/B95/B91

Room
Floor: E39/E35/E31
Walls: G000/G00
Baseboards: C3/C1

————————–

Card Recipe for My We Believe in Santa:

Christmas Eve Bundle, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Stylish Shapes Dies, Stampin’ Up!
Itty Bitty Christmas, Stampin’ Up!
Rhinestone Basic Jewels, Stampin’ Up!
Black Gelly Roll Pen, Sakura
Glossy Accents, Ranger
Star Dust Stickles, Ranger
Basic White and Real Red Card Stock, Stampin’ Up!

Finished card size: 6 ½” x 3 ½”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team card for Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

Christmas Snow Globe Wishes

December 22, 2022 Leave a comment

A Christmas Card with a girl holding a snow globe. — Christmas Snow Globe Wishes

Hello Crafty Friends! It’s Laurie here! I am sharing my Christmas Snow Globe Wishes as my Design Team Inspiration Card for Conie Fong Art & Design using Snow Globe Wishes which includes 2 stamps in JPG / PNG formats.

The Details of My Card

When I saw all those curls, I just had to colour her with red hair, but with red hair I needed a colour scheme that wouldn’t clash. So, the Poinsettia Place Designer Series Paper came to my rescue! It had beautiful poinsettias in yellowy-creams and greens! Perfect for my card!

So, I coloured her luscious curls red and used green for her dress. It was a bit tricky colouring the poinsettia so that it had colour, but still retained a white value. I used W3 and W1 with a light touch of Y32 to the centre of the petals and then the Colourless Blender (0) to soften the edges of the colour so that it faded to white in the highlights.

Since this was a Christmas card, I decided to add some sparkle to the DSP with Gold Gilded Leafing, Heat and Stick Powder and my Heat Tool. I even added a little of the leafing to the beautiful die cut circle behind the stamp. You must be careful with it since it is so light it floats everywhere! Don’t sneeze! Lol!

Adding gold leaf to the paper — Gold Gilded Leafing Embellishment, Stampin’ Up!

The sentiment was heat embossed in gold and then die cut out with a die from the Pretty Pillowbox Dies by Stampin’ Up!

I added Stardust Stickles to the globe’s base, the snowman’s hat trim, her gold dress trim and the centre of the poinsettia. Glossy Accents was also added to the gold berries in her hair.

Don’t you think the white poinsettia with gold accents and the gold holly leaves were perfect for my card! The only other embellishments needed were some gold glitter dots!

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E18/E08/YR18/YR14
Eyes: G99/YG67/YG63/C3/C1/0
Greens: G99/YG67/YG63/YG03
Golds: E15/Y38/Y35/Y32
Poinsettia: W3/W01/0/Y32/Y38
Snow/Snow Globe Glass: B0000/B000
Snowman: B0000/B000/R29/R24

Close Up of Girl holding snow globe — Close Up of Snow Globe Wishes Stamp

————————–

Card Recipe for My Christmas Snow Globe Wishes Card:

Snow Globe Wishes, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Poinsettia Place Designer Series Paper, Stampin’ Up!
Festive Frames – Carol Dies, Creative Expression, Sue Wilson
Pretty Pillowbox Dies, Stampin’ Up!
Sparkly Season Stamp Set, Stampin’ Up!
Gold Glitter Enamel Dots, Stampin’ Up!
Mulberry Paper Flowers – White Christmas & Christmas in the Country, Prima Flowers
Gold Gilded Leafing Embellishment, Stampin’ Up!
Metallics Embossing Powder, Stampin’ Up!
VersaMark Ink, Stampin’ Up!
Heat & Stick Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
Stardust Stickles, Ranger
Glossy Accents, Ranger
White Gelly Roll Pen, Sakura
Garden Green and Bumblebee Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 5 ½”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Snow Globe Wishes for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

Candy Cane Wishes Card

December 20, 2022 2 Comments

A Christmas Card with an elf holding a candy cane — Candy Cane Wishes Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Candy Cane Wishes Card as my Design Team Inspiration Card for Paper Nest Dolls using the cute Tiny Elf Ellie.

The Details of My Card

For my card, I coloured Ellie with my Copic markers in traditional Christmas colours. She went perfectly with the Sweetest Christmas DSP by Stampin’ Up!, plus its theme was candy canes! Couldn’t get better than that!

The diagonal striped Real Red die cut piece allowed the DSP to show through. So, I matched the openings in the die cut to the DSP stripes which added to my candy cane striped theme. Even the die cut candy canes behind the sentiment were from the DSP.

The sentiment “Candy Cane Wishes and Mistletoe Kisses” summed up my card perfectly! I threaded some Garden Green ribbon through the die cuts holes in the sentiment piece. A flat jingle bell trinket tied with white Baker’s Twine mirrored her bell on her hat. I kept the tails of the twine long so that I could make them swirl on the card.

Some Red Rhinestones and Glossy Accents on the Candy Cane added some nice sparkle to the card.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E29/E27/E25/E23
Reds: R39/R29/R24/R24
Greens: G99/G94/G21
Jingle Bell/Buckle: Y26/Y23/Y21/Glossy Accents
Belt: C6/C4/C3
Candy Cane: R39/R37/R31/C3/C1/0/Glossy Accents

Close Up of elf holding candy cane — Close Up of Tiny Elf Ellie

————————–

Card Recipe for My Candy Cane Wishes Card:

Tiny Elf Ellie, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Sweetest Christmas Designer Series Paper, Stampin’ Up!
Sweet Candy Canes Bundle, Stampin’ Up!
Real Red & Garden Green Ribbon Combo Pack, Stampin’ Up!
Flat Jingle Bell Trinkets, Stampin’ Up!
Baker’s Twine Essentials Pack, Stampin’ Up!
Red Rhinestone Basic Jewels, Stampin’ Up!
Glossy Accents, Ranger
Basic White and Real Red Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

Stamp Size: 4” Tall

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team card for Paper Nest Dolls!
Thank you for stopping by!

Hugs,
Laurie

Here Comes Santa Card

December 19, 2022 Leave a comment

A Christmas Card with Santa arriving on a train with presents — Here Comes Santa Card

Hello Crafty Friends! Laurie here again! I am sharing my Here Comes Santa Card using the Santa’s Delivery Bundle which include the Santa’s Delivery Stamp Set and the Santa’s Train Dies by Stampin’ Up!

The Details of My Card

For my card, I decided that I wanted to create a fun bridge card with Santa riding in on his train! I love that you can die cut pieces from the DSP like Santa’s train making this a fast and easy card!

I used the Snowy White Velvet Sheets for the embossed snowflakes on either side of the bridge and for the bridge part that spans the two pieces.

The only stamping was the sentiment in Poppy Parade on the cloud die from the Give it a Whirl Dies.

Supplies:

Stamps/Bundles/Dies: Santa’s Delivery Bundle (159590), Give It a Whirl Dies (154336)

Inks: Poppy Parade Classic Stampin’ Pad (147050)

Paper: Poppy Parade (119793), Basic White (159276), Early Espresso (119686), Santa Express Designer Series Paper (159582), Snowy White Velvet Sheets (156405)

Accessories: Wintry 3D Embossing Folders (155433), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Poppy Parade:
- 5 ½” x 8 ½” scored at 4 ¼”
- Cut 1-1/8” from either end leaving 3 ¼” centre piece
Snowy White Velvet Sheets:
- 4” x 1” (2 pieces)
- 1 x 5 ½”
Santa Express Designer Series Paper:
- 4” x 3”
- Santa
- Train car with presents
Basic White:
- Scraps for sentiment and puffs of smoke
Early Espresso:
- 5” x ½”

More Information on My Here Comes Santa Card:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Merry Sweet Gnome Card

December 13, 2022 4 Comments

A Christmas Card with a gnome on it wishing a Merry Christmas and Happy New Year. — Merry Sweet Gnome Card

Hello Crafty Friends! Laurie here again! I am sharing my Merry Sweet Gnome Card using the Kindest Gnomes Bundle and the matching Storybook Gnomes 12″ x 12″ Designer Series Paper. The Kindest Gnomes Bundle includes the Kindest Gnomes Stamp Set and the Gnomes Dies.

The Details of My Card

When I saw that the Gnomes Dies had a build your own gnome, I just wanted to make a card using them! He is just sooo cute! I also decided to use the Snowy White Velvet Sheets for his beard to add a soft texture to it.

From that idea, I decided to use the DSP with all the gnome homes on it. Sort of like a Merry Christmas from our home to yours idea! So, I used the largest stitched square from the Stylish Shapes Dies to cut a piece out and matted it with Poppy Parade.

The only stamping was the sentiment making this a fast and easy card! It was stamped in Poppy Parade and was die cut using the Stylish Shapes Dies as well.

Don’t you just love the Whimsical Woodland 3D Embossing Folder! So fun! It was the perfect backdrop to my card!

For embellishments, I used a scattering of Fine Sparkle Adhesive-Backed Gems on the snowflakes that were die cut from the Frosted Flurry Dies.

Supplies:

Stamps/Bundles/Dies: Kindest Gnomes Bundle (159626), Stylish Shapes Dies (159183), Frosted Flurry Dies (159811)

Inks: Poppy Parade Classic Stampin’ Pad (147050)

Paper: Basic White Thick (159229), Balmy Blue (146982), Poppy Parade (119793), Basic White (159276), Petal Pink (146985), Storybook Gnomes Designer Series Paper (159615), Snowy White Velvet Sheets (156405)

Accessories: Whimsical Woodland 3D Embossing Folder (159831), Fine Sparkle Adhesive-Backed Gems (159967), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Basic White Thick:
- 5 ½” x 8 ½” scored at 4 ¼”
Balmy Blue:
- 4” x 5 ¼”
Poppy Parade:
- 4” x 4”
- Scraps for hat and feet
Basic White:
- Scraps for sentiment and snowflakes
Petal Pink:
- Scraps for nose
Storybook Gnomes Designer Series Paper:
- 2 ¾” x 2 ¾”
Snowy White Velvet Sheets
- Scrap for beard

More Information on My Merry Sweet Gnome Card:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Here is another card that I made using the Kindest Gnomes Bundle. It is an easel card. Please click here to see my post.

Christmas Holly Wishes Card

December 8, 2022 2 Comments

A card with stamped holly on it. — Christmas Holly Wishes Card

Hello Crafty Friends! Laurie here again! I am sharing my Christmas Holly Wishes Card using the Leaves of Holly Bundle which includes the Leaves of Holly Stamp Set and the Holly Berry Dies by Stampin’ Up!

The Details of My Card

For my card, I decided to make a Joy Fold card since it’s a card within a card and oh, so fun!

I love the Leaves of Holly Stamp Set with its Two-Step design to create images with added texture and dimension. Since the berries and holly are created with two stamps, I stamped the outline stamp first in Shaded Spruce and Garden Green for the holly and Cherry Cobbler for the berries on a piece of Basic White. Next, I inked the mostly solid stamp in the same colours, stamping on a piece of scrap paper to lighten the colour, and then stamping inside the outline.

Close Up of Stamping of Holly — Close Up of Stamping

Once I created my background for the die cut sentiment, I gold embossed the sentiment on Basic White and die cut it out. I die cut another piece in Cherry Cobbler which I then cut in half and adhered to the top and bottom.

The sentiment was layered on the die cut Garden Green/Shaded Spruce holly piece. I added some gold trim to tie in the gold embossed sentiment and placed it peeking out under the sentiment piece.

Showing the Inside of card — Card Fully Open

Next, I added Basic White for the stamped inside sentiment of the smaller card and to the base of the larger card followed by the DSP to both card bases. The sentiment piece was next. Finally, the two cards could be adhered together with the smaller one centred on the larger one. A finishing touch was some red rhinestones to mimic berries were added to the holly die cut.

Supplies:

Stamps/Bundles/Dies: Leaves of Holly Bundle (159608)

Inks: Garden Green Classic Stampin’ Pad (147089), Shaded Spruce Classic Stampin’ Pad (147088), Cherry Cobbler Classic Stampin’ Pad (147083), VersaMark Ink Pad (102283)

Paper: Basic White (159276), Garden Green (102584), Shaded Spruce (146981), Cherry Cobbler (131202), Boughs of Holly Designer Series Paper

Accessories: Simply Elegant Trim (155766), Red Rhinestone Basic Jewels (146924), Embossing Additions Tool Kit (159971), Metallics Embossing Powder (155555), Heat Tool (129053), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Garden Green: (3 pieces)
- 8” x 4 ¼” scored at 2 ½”
- 8” x 3 ¾” scored at 4”
- 3 ¾” x 2 ¾”
Basic White: (4 pieces)
- 3-1/8” x 3 ¼”
- 3 ¼” x 3 ½”
- 5 ¼” x 4”
- 2 ½” x ¾”
Cherry Cobbler:
- 3 ¾” x 3 ½”
Shaded Spruce: Scraps
Boughs of Holly Designer Series Paper (2 pieces):
- 4” x 2 ¼”

More Information on My Christmas Holly Wishes Card:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Merry & Bright Christmas Wishes

December 6, 2022 1 Comment

A Fairy Girl Holding a Christmas Stocking — Merry & Bright Wishes Christmas Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Merry & Bright Christmas Wishes as my Design Team Inspiration Card for Conie Fong Art & Design using Molly’s Christmas Stocking Bundle and Bauble Gnome and Sentiment Bundle for the sentiment.

Molly’s Christmas Stocking Bundle includes 4 Images:

Image 1 & 2: Molly’s Christmas Stocking JPG / PNG format
Image 3 & 4: Molly’s Christmas Stocking – Without Wings JPG / PNG format

Christmas Stocking Bundle includes 6 images:

Image 1: Bauble Gnome Right JPG format only
Image 2: Bauble Gnome Left JPG format only
Image 3-4: Sentiment Tis The Season To Be Jolly JPG / PNG format
Image 5-6: Sentiment May You Holidays Be Merry & Bright JPG / PNG format

The Details of My Card

For my card, I decided that I wanted to use Molly With Wings since I used Molly Without Wings for another card. I will link to it at the end of this post. Also, I wanted to use non-traditional colours in my colouring to match my paper. I love the look of Navy, Green and silver! Very elegant!

Once I finished colouring her with my Copic markers, I added Stardust Stickles to all the trim and Stardust Gelly Roll Pen to her wings to make everything sparkle. I double matted her and the card base with silver foil and Night of Navy to tie in my colour scheme. The silver star beneath the sentiment added to my silver colour scheme and gave a backdrop to the sentiment which I used from the Bauble Gnome and Sentiment Bundle. I thought the jingle bell border die was perfect since she had a jingle bell on her top and they just had to be silver foile as well! A scattering of rhinestones coloured with my Copic markers to match my colour scheme, added more sparkle.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E49/E47/E44/E43
Blues: B39/B37/B34
Greens: G99/G94/G21
Wings: B00/B000/0
Bear: E35/E33/E31/E30/R20
Rhinestones: B37/G94

Close Up of Girl Holding Christmas Stocking — Close Up of Molly’s Christmas Stocking

————————–

Card Recipe for My Merry & Bright Christmas Wishes Card:

Molly’s Christmas Stocking Bundle and Bauble Gnome and Sentiment Bundle,
Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
White Christmas 6” x 6” Paper Pad, Carta Bella Paper Co.
Silver Foil Sheet, Stampin’ Up!
Jingle Bells Die, My Stash
Washi Label Punch, Stampin’ Up!
Sliver Snowflake Embellishment, My Stash
Basic Rhinestone Jewels, Stampin’ Up!
Stardust Gelly Roll Pen, Sakura
Stardust Stickles, Ranger
Night of Navy Card Stock, Stampin’ Up!

Finished card size: 5 ¼” x 5 ¼”

————————–

My other card using Molly Without Wings.
To visit it, please click here or on the photo.

Christmas card with a girl holding a Christmas stocking filled with gifts — Christmas Stocking Card

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Molly’s Christmas Stocking Bundle and Bauble Gnome and Sentiment B undle for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

A Christmas Bluebird Card

November 29, 2022 3 Comments

A Christmas Card with a Bluebird Holding a Berry Branch — A Christmas Bluebird Card

Hello Crafty Friends! It’s Laurie here again! I am sharing A Christmas Bluebird Card as my Design Team Inspiration for Conie Fong Art & Design using the beautiful Red Robin With Berries. The sentiment is from Christmas Mailbox Gnome and Sentiment Bundle.

The Details of My Card

For my card, I decided that I wanted to colour the bird with my Copic markers in blues instead of the traditional Robin colours. I thought it would be a fun way to show the versatility of the stamp. I had a lot of fun creating the texture of his feathers! Since some bird’s feathers take on a darker winter colour, I went with a tan colour for his white bib.

How to Create the Sky

For the sky, I had a background leftover from another card just sitting on my desk. So, I thought it would be a great way to use it! I just had to trim it down to fit my card. For my sky, I used my Distress Oxide Inks and my Mini Blending Tool starting with Fossilized Amber at the base of the paper, followed by Worn Lipstick, Wilted Violet, Broken China and Faded Jeans.

Once the colours were blended, I used my Splatter Tool dipped in Frost White Shimmer Paint and then in water to create snow.

Next, I layered the birch tree die on top. I love this die! It is perfect for mini slimline cards which are all the rage right now! I added a stitched snowy bank at the base of the card since the birch die doesn’t reach the bottom of the card. The snowy bank was the perfect platform for my die cut branch that the bird is perched on.

I wanted to tie in the bird’s berries and leaves with my sentiment. So, I printed another bird, but only coloured the berries and leaves and fussy cut them out. I then layered it behind the wooden star and sentiment. A strip of vellum that looks like snow anchors the sentiment piece. A piece of linen thread adds to the rustic wooden star.

Christmas Sentiment — Sentiment from from Christmas Mailbox Gnome and Sentiment Bundle

To finish the card, I added some punched white glimmer snowflakes, glossy accents on the berries and Stardust Stickles on the hat trim.

————————–

Copic Markers:

Blue Feathers: B97/B95/B91
White Feathers: W1/E43/E41
Beak/Feet: E15/YR15
Hat: R29/R27/R24/R22/W1/Stardust Stickles
Leaves: G29/G28/YG09
Berries: R59/R29/R22/Glossy Accents
Branch: E15

Close Up of Bluebird holding berries — Close Up of Red Robin With Berries

————————–

Card Recipe for A Christmas Bluebird Card:

Red Robin With Berries, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Snowflake Specialty Vellum, Stampin’ Up!
White Glimmer Paper, Stampin’ Up!
Woodland Collection Birch Tree Forest, Sue Wilson
Slimline Stitched Hillside Border Dies, Lawn Fawn
Notebook/Banners Etched Metal Dies, Photo Play
Snowflake Border Punch, Martha Stewart
Linen Thread, Stampin’ Up!
Wooden Star, From my Stash
Mini Ink Blending Tool, Ranger
Fossilized Amber Distress Oxide Ink, Ranger
Worn Lipstick Distress Oxide Ink, Ranger
Wilted Violet Distress Oxide Ink, Ranger
Broken China Distress Oxide Ink, Ranger
Faded Jeans Distress Oxide Ink, Ranger
Frost White Shimmer Paint, Stampin’ Up!
Tim Holtz Distress Splatter Brush, Ranger
Glossy Accents, Ranger
Stardust Stickles, Ranger
Misty Moonlight, Soft Suede and Real Red Card Stock, Stampin’ Up!

Finished card size: 6-1/8″ x 3-5/8″

————————–

Awards Won:

The Most Beautiful Christmas Projects Online for December 2022 –
The Paper Crafting Magazine
World Wide Open Design Team Challenge #11 – ATG
December 2022 Card of the Month – Creative Scrapbooker Magazine
2022 Card of the Year – Creative Scrapbooker Magazine

Published in the Spring issue of the Creative Scrapbooker Magazine!

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like A Christmas Bluebird Card as my Design Team Inspiration
using Red Robin With Berries for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

My Fa La La Card

November 22, 2022 Leave a comment

A Card with Snow People Singing Fa La La on it — My Fa La La Card

Hello Crafty Friends! It’s Laurie here! I am sharing My Fa La La Card as my Design Team Inspiration Card for Paper Nest Dolls using Snow Globe Bundle. This Bundle includes a clear snow globe with a selection of images and labels for the holiday season. I love the versatility of this bundle since you can interchange the images in the globe or use the images by themselves.

The Details of My Card

For my card, I decided to use the singing snow people without the globe. They are just too cute, and I had the perfect Fa La La die for them. In fact, I had two Fa La La dies. Lol! The cover plate behind them and the red glimmer falala.

I pulled the colours of the DSP to colour my snow people in a red and a blue/green. I used my favourite technique for their snow bodies where I use two light makers along the edges and then use my colourless blender to soften the transition between the colour and the paper. The same technique was used for their song books.

Since these cuties are singing, I had to add some musical notes floating up from them! Some glimmery snowflakes and snowbank add even more sparkle to my card. The finishing touch was Star Dust Stickles on their hat trim and the hearts.

————————–

Copic Markers:

Reds: R29/R24/R24/R22
Blue/Greens: BG09/BG57/BG53
Whites: BG0000/BG000/0
Carrots: YR12/Y38/YR12
Song Books: E42/E40/0

Close Up of Snow People on the Card — Close Up of Snow People

————————–

Card Recipe for My Fa La La Card:

Snow Globe Bundle, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Santa Express Design Series Paper, Stampin’ Up!
Real Red & White Glimmer Paper, Stampin’ Up!
Slimline Stitched Hillside Borders, Lawn Fawn
Frosted Flurries Dies, Stampin’ Up!
Fa La La Cover Die, The Stamp Market
Music Notes Die, From my Stash
Star Dust Stickles, Ranger
Basic White, Bermuda Bay and Petal Pink Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”
Stamp Size: 3” Tall

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team card for Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

My Wintery Christmas Barn

November 16, 2022 Leave a comment

Christmas Card with a Horse Sled infant of a Barn — My Wintery Christmas Barn

Hello Crafty Friends! Laurie here again! I am sharing My Wintery Christmas Barn using the Christmas Barn Bundle by Stampin’ Up! which includes the Christmas Barn Stamp Set and the Barn Dies.

The Details of My Card

For my card, I decided to make a faux centre-step card to allow enough room for the barn to fit on the centre panel. I created my faux centre-step card using my template with all my measurements that I have included at the end of this post. Some die cut snowflake were added at the top of the centre panel to create some interest before adhering it to the card base. You could add DSP as another option.

Side View of Card — Side View Of Faux Centre-Panel Card

My Stampin’ Blends were used to colour the elements to create my winter wonderland scene. I have included some links to past colouring tutorials using Stampin’ Blends at the end of this post.

Once I die cut them out, I stamped the sentiment in Cherry Cobbler on the Basic White strip on the right side to allow room for the sled. I popped this piece up so that I could tuck in the barn and trees behind it. Before adding the sled, I trimmed the fence to fit and glued it in place.

Close Up of Barn on Card — Close Up of Barn

I thought the Storybook Gnomes Designer Series Paper was perfect with its large snowflakes to add to my winter wonderland theme and you can see it through the die cut snowflakes on the centre panel! All the embellishments needed was to add the Sparkle & Shine Sequins to create a flurry of more snowflakes!

Supplies:

Stamps/Bundles/Dies: Christmas Barn Bundle (159749)

Inks: Cherry Cobbler Classic Stampin’ Pad (147083), Mossy Meadow Classic Stampin’ Pad (147111), Tuxedo Black Memento Ink Pad (132708)

Paper: Basic White (159276), Pool Party (122924), Soft Suede (115318), Smoky Slate (131202), Storybook Gnomes Designer Series Paper (159615)

Accessories: Cherry Cobbler Stampin’ Blends Combo Pack (154880), Mossy Meadow Stampin’ Blends Combo Pack (154890), Soft Suede Stampin’ Blends Combo Pack (154906), Smoky Slate Stampin’ Blends Combo Pack (154904), Sparkle & Shine Sequins (158137), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

My Wintery Christmas Barn Card Standing Up

Measurements:

Pool Party: (2 pieces)
- 8 ½” x 5 ½” cut/scored according to template below
- 8 ½” x 3” cut/scored according to template below
Basic White: (5 pieces)
- Sentiment: 7/8” 5-3/8”
- Barn: 3 ½” x 2 ¼”
- Trees: 2 ½” x 1” (2 pieces)
- Sled: 2 ½” x 1”
Soft Suede:
- Scraps
Storybook Gnomes Designer Series Paper:
- 3” x 5 ¼”