Hello Crafty Friends! Laurie here again! I am sharing My Birthday Wish Card using the Wildflower Birthday Suite Collection by Stampin’ Up! I wanted to try a book binding card, and I thought the Wildflower Birthday Specialty Designer Series Paper would make a very pretty card.
The Details of My Birthday Wish Card
For my card, I used two different pieces of DSP for the “binding” and the “cover”. Since it was a birthday card, I decided to use the birthday cake piece and the pink plaid with Basic White mats to distinguish them from the Pretty in Pink card base.
Next, to match the gold accents in the DSP, I heat embossed the sentiment on the Basic White flag. Then, I added two DSP flags and one of the floral die cuts to decorate it. I love that the die cuts make it so easy to decorate your cards! In fact, I made another card with the same style, but added a large floral die cut to the bottom of the flag. Since my cards were for a swap, I didn’t have enough of these die cuts for all of them. So, for my finished card, I omitted it.
Alternative Card
To create my banner, I added a few more flags behind my sentiment flag and had everything hung from a Basic White die cut “rope” that I trimmed with my Paper Snips to fit.
To decorate my card further, I used the Gold Open Weave Trim to match my embossing. The width of the trim just fit, but I thought a White Baker’s Twine bow would help keep it in place.
As a finishing touch to my card, I added some Party Dots in matching colours to my card on and below my flag sentiment.
Supplies:
Stamps/Bundles/Dies: Wildflower Birthday Suite Collection (164604)
Inks: VersaMark Ink (102283)
Paper: Pretty in Pink (163793), Basic White (166780)
Accessories: Baker’s Twine Essentials Pack (155475), Metallics Embossing Powder (165678), Heat Tool (129053), Embossing Additions Tool Kit (159971), Paper Snips (103579), Stampin’ Paper Trimmer (152392), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683), Multipurpose Liquid Glue (110755)
Close Up of Focal Point
Measurements:
Pretty in Pink:
11” x 4 ¼” scored at 4” and 5 ½”
Basic White (4 pieces):
3-7/8” x 4-1/8”
1-3/8” x 4-1/8″
2 ¼” x 3” (Banner)
Scrap for “Rope”
Wildflower Birthday Specialty Designer Series Paper (6 Pieces):
1 ¼” x 4”
3 ¾” x 4″
Scraps for 4 Flags
Floral Die Cut
More Information on My Birthday Wish Card
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! Laurie here again! I am sharing my Hello Spring Alternative Cards using the Hello Spring February 2025 Paper Pumpkin Kit by Stampin’ Up! I am so over winter and ready for Spring. So, these cards helped to put me in the mood for new growth and warmer weather. I had so much fun with this Kit that I made 4 cards including a slimline quad fold pocket card and a triple panel bridge card!
But, first, here are the three cards that the kit makes. Perfect for this time of year in their bright cheery colours!
Hello Spring February 2025 Paper Pumpkin Kit
The Details of My Hello Spring Alternative Cards
My Slimline Quad Fold Card
For my first alternative card, I thought it would be fun to create a slimline card with pockets into which the seed cards would fit. I even used the Grow with Love Dies to cut down one of the envelopes that came in the kit to create an envelope for my Chives card.
My Slimline Quad Fold Card
For the front, I used the leftover pieces from two envelopes (see Card 4 for second leftover piece) to create some interest behind my Bronze Foil Piece. I thought a bouquet of herbs sprouting from the sentiment would be fun! I used a 1 ½” circle punch to punch out a Basic Beige circle from the Bronze Foil Piece and matted it behind the sentiment. Since the herbs were in front of it, you couldn’t see the missing part. Finally, I added a bee from the Spring Is in the Air Dies.
My Slimline Quad Fold Card Laid Flat
For the inside, I used two card bases to line my pockets. More bees and honeycomb from the Spring Is in the Air Dies decorated the inside along with a sentiment.
The finishing touch was the linen wrapped three times around the card to hold it closed and tied in a bow.
Measurements:
Basic White Card Base:
8” x 12” – scored at 3”, 6”, 9” along 12” side and 5 ½” along 8” side
Scraps for bees and honeycomb
Blue Card Base (3 pieces):
2-7/8” x 3 ½”
Green Card Base (3 pieces):
2-3/8” x 2-7/8”
Envelope Leftovers (2 pieces):
5” x 2-3/8”
Other Pieces from Kit:
Herb Precut Paper Pieces
Herb Cards
Bronze Foil Piece
Sentiment Pieces
Linen Thread
Seed Packet Envelope
My Triple Panel Card
For my second alternative card using the Hello February 2025 Paper Pumpkin Kit, I made a triple panel card. I love it when the card is closed, and the insides are hidden creating a nice surprise as the recipient opens the card!
My Triple Panel Card
So, I cut the green card base at 1” on either side to create the struts to which the bridge will be adhered. The larger Bronze Foil Piece from the kit fitted the bridge perfectly! Then, using the scraps from the precut paper pieces, I stamped and die cut the flower heads and another bee from the Spring Is in the Air Dies.
For the middle panel, I punched a 1 ½” circle from another Bronze Foil Piece and layered it behind my sentiment and the mint precut paper piece.
Middle Panel of Triple Panel Card
For the final panel, I stamped the textured stamped multiple time in Petunia Pop on Petunia Pop card stock for a tone-on-tone look. Then, I layered the smaller Bronze Foil Piece with the basil precut paper piece leaving room for a message.
Last Panel of Triple Panel Card
Measurements:
Green Card Base:
Cut at 1” and 4 ½”
Basic White:
Scraps for Bees and Flower Heads
Petunia Pop:
4” x 5 ¼”
Other Pieces from Kit:
Chives Card
Herb Precut Paper Pieces on Inside
Bronze Foil Pieces
Green Diagonal Strip Piece
Sentiment Pieces
My Happy Easter Card
For my next alternative card, I decided to use the green card base scrap left over from another card. This created a nice band on the left side.
My Happy Easter Card
For my focal point, I layered several elements from the Kit. Again, I used my 1 ½” punch to punch a circle from the Bronze Foil Piece making sure to have it on the left side and hidden by the Chives card.
Next, I stamped and die cut the flower heads and another bee from the Spring Is in the Air Dies. I just love these dies, especially that bee!
Measurements:
Green Card base:
2 ½” x 4 ¼”
Basic White:
Scraps for Bees and Flower Heads
Other Pieces from Kit:
Blue Card Base
Chives Card
Bronze Foil Piece
Sentiment Pieces
Linen Thread
My Happy Easter Pocket Card
For my last alternative card, I decided it would be fun to die cut another mini envelope from the seed packet envelopes (use the scraps from this one for the Slimline Quad Fold Card) and have the herbs sprouting from it.
My Happy Easter Pocket Card
So, I used the used the Grow with Love Dies to create my envelope. The Beige fastener was die cut from leftover scraps of the envelope.
I stamped the sentiment and added a Bubble Bath mat to it. To match the mat, I die cut another butterfly using the Spring Is in the Air Dies, but this time in Bubble Bath.
I decided to only stamp and die cut one flower hear to give the image dimension to it.
Measurements:
Basic White:
Scraps for Flower Head
Bubble Bath:
1 ½” Circle
Scraps for Bee
Other Pieces from Kit:
Beige Card Base
Chives Card
Herb Precut Paper Pieces
Sentiment Piece
Seed Packet Envelope
More Information on My Hello Spring Alternative Cards
For more of my Stampin’ Up! paper Pumpkin cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! It’s Laurie here! I am sharing My Butterfly Wishes Card as my Design Team Inspiration Card for Conie Fong Art & Design using the Butterfly Wishes image from the Butterfly Wishes Kisses Bundle. She is perfect for those birthday cards we all need! This purchase includes 2 Images:
Title1: Butterfly Wishes
Title2: Butterfly Kisses
The Details of My Butterfly Wishes Card
I had a lot of fun colouring the Butterfly Wishes image from the bundle with my Copic markers to match my Mintay paper. I thought the Peony Garden paper suited the image since she had peonies in her hair. Finally, I added Wink of Stella to the butterflies to make them shimmer and Glossy Accents to the candle flame.
For my card, I decided to go with a faux-step card so that the beautiful Mintay paper can be visible on the background layer, even behind my focal point. I had a scrap of that paper left over. So, I trimmed it down, turned it over, and added to my front panel where the sentiment was located. Next, I tucked in a Butterfly Border behind this panel since it was perfect for my butterfly motif and added a fun whimsical feel.
Faux-Step Side View
For the birthday sentiment, I used my Glimmer Hot Foil System (a new toy!) and die cut it out. Then I fussy cut the tea cup and two of the butterflies from the Mintay paper. I love that these images match the papers! I tucked in the sentiment and one of the butterflies around the tea cup to create my sentiment cluster. The other butterfly was added to the top left of my coloured image so that it hung over the edge between the layers.
The finishing touch was a scattering of rhinestones to add even more sparkle to my card.
Butterfly Wishes Kisses Bundle, Conie Fong Art & Design Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink Peony Garden 8” x 8” Paper Pad, Mintay Papers Curved Everyday Sentiments Hot Foil Plate & Die Set, Spellbinders Paper Arts Glimmer Hot Foil System, Spellbinders Paper Arts Gold Foil Paper, Spellbinders Paper Arts 3 ¾” and 3 ½” Layering Stitched Rectangles, Memory Box Champagne Rhinestones Basic Jewels, Stampin’ Up! Butterfly Border Die, Joy Crafts Paper Snips, Stampin’ Up! Wink of Stella, Stampin’ Up! Glossy Accents, Ranger
Finished card size: 5 ½” x 5 ½”
————————–
To view my other Conie Fong Art & Design projects, please click here.
Hello Crafty Friends! It’s Laurie here! I am sharing My Beautiful Day Card as my Design Team Inspiration Card for Conie Fong Art & Design using the stunning Bella Rose. This purchase includes 4 Images:
Bella Rose Left (girl facing left in JPEG format)
Bella Rose Right (girl facing right in JPEG format)
Rose Bonus image JPEG
Rose Bonus image PNG
The Details of My Beautiful Day Card
For my card, I decided to go with a soft vintage Victorian theme and the Stamperia paper was perfect for it! The paper is so pretty with its roses and vintage wallpaper designs! There was one piece that had a circle with roses in it that suited Bella Rose! Since I wanted to add layers to my card, I used my Paper Snips to cut out the circle part to use for my focal point.
But first, I coloured Bella Rose with my Copic markers in soft colours to match my theme. I even added glitter to the roses in her hair to make them shimmer. I positioned Bella on the circle so that the rose on the layer below peeked through…almost like she was smelling the rose.
Next, I decided to create a rose gold foiled sentiment with a matching rose gold stitched mat. So, I used my laser printer and printed out a pretty scripty sentiment. Then, I foiled it using my laminator. This is something new to me and I hope to do more of it! Once this was done, I punched it out with a circle punch and added my mat.
To balance out my card, I used a tag that I tucked in behind my focal point opposite Bella. Then, I tucked in a beautiful detail rose die cut from Paper Roses on top of the tag. I thought the die cut roses matched the roses in Bella’s hair beautifully!
Finally, to add to the Vintage Victorian theme, I used some wide lace ribbon in a soft cream colour. To mirror this, I added three material roses in a matching colour opposite Bella on the circle.
The finishing touch was a scattering of sequins that matched my colour scheme and added sparkle to my card.
————————–
Copic Markers:
Skin: E000/E00/E21/E11/E04/R20 Hair: E25/YR24/Y26/Y21 Pink Flower: R85/R83/R81/Glitter White Flower and Bow: E53/E51/E50/0/Glitter
Close Up of Bella Rose
————————–
Card Recipe for My Beautiful Day Card:
Bella Rose, Conie Fong Art & Design Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink Precious 8” x 8” Paper Pad, Stamperia Rose Gold Foil Paper, Stampin’ Up! Rose Bloom Metal Die, Paper Roses Stylish Shapes Dies, Stampin’ Up! 2 1/6” Lace Ribbon, Michael’s Art & Crafts Vanilla Flower Trim, Stampin’ Up! Black Laser Printer Sweet Birthday 2nd Birthday Kit, Sassy’s LLC Rose Gold Foil Laminator 1 ½” Circle Punch, Stampin’ Up! Paper Snips, Stampin’ Up! Pink Sequins, From my Stash Glamour Dust Glitter, DecoArt
Finished card size: 5 ½” x 5 ½”
————————–
To view my other Conie Fong Art & Design projects, please click here.
Hope you like my Design Team Inspiration Card using Bella Rose for Conie Fong Art & Design!
Hello Crafty Friends! Laurie here again! I am sharing my Poppin’ Up! 2025 Calendars using the Terrific Toadstools Bundle and three Sale-a-Bration items including the Toadstool Gardens 6″ x 6″ Designer Series Paper, the Purple Adhesive-Backed Sequins and, the Starstruck Embossing Folder by Stampin’ Up! Canada Post went on strike right before Christmas and no Christmas cards were mailed. So, instead, I decided to send calendars again this year. I made 20 calendars for my customers.
20 Calendars!
The Details of My Poppin’ Up! 2025 Calendars
For my calendars, I decided to create one design with different colours of DSP. I matched the card stock colours to the DSP colours trying different colours together. I ended up using Melon Mambo and Granny Apple Green. I’m not a Melon Mambo person…so, these colours were out of my comfort zone. Lol!
Calendar #1 with White Background DSP
Once I decided on the colours, I stamped the mushrooms in Pumpkin Pie and Melon Mambo and punched them out with the matching punch. I decided to keep the stems simple with just punched out Crumb Cake card stock.
Calendar #2 with Green background DSP
Next, I stamped the sentiment in black and die cut it out with the large flag from the Stylish Shaped Dies.
To add interest to the Melon Mambo banner, I embossed it with the free Sale-a-Bration Starstruck Embossing Folder.
Calendar #3 with Pink Background DSP
Time to assemble all the layers of the banner. I added a stitched circle behind my mushrooms and tucked in my sentiment. Then, I layered the embossed banner piece behind everything.
Next, I added a Melon Mambo mat to the calendar and adhered it to the base.
Finally, I added some of the free Sale-a-Bration Purple Adhesive-Backed Sequins around my focal point.
Supplies:
Stamps/Bundles/Dies: Terrific Toadstools Bundle (164790), Stylish Shapes Dies (159183)
Inks: Melon Mambo Classic Stampin’ Pad (147051), Pumpkin Pie Classic Stampin’ Pad (147086), Tuxedo Black Memento Ink Pad (132708)
Paper: Granny Apple Green (146990), Melon Mambo (115320), Crumb Cake (120953), Basic White (159276), Toadstool Gardens 6″ x 6″ Designer Series Paper (164942)
Accessories: Purple Adhesive-Backed Sequins (164970), Starstruck Embossing Folder (164972), Paper Trimmer (152392), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683), Taylored Expression Calendars
Close Up of Banner
Measurements:
Granny Apple Green (4 pieces):
11” x 4 ¼” scored at 5 ½”
4” x 4 ¼” scored at ¾”, 2” and 3 ¼” along 4” side
2 ¼” x 2 ¼”
Melon Mambo:
4-1/8” x 5-3/8”
4” x 1 ½”
3-1/8” x 2-7/8” (for behind calendar)
Basic White:
3 ½” x 1 ¼” (Sentiment)
Scraps for mushroom caps
Crumb Cake:
Scrap
Toadstool Gardens Designer Series Paper:
4” x 5 ¼”
Side View of Calendar
More Information on My Poppin’ Up! 2025 Calendars
Downloadable Calendar Template
To download a PDF of the Calendar Template, please click here or on the picture.
Downloadable Calendar Template
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! It’s Laurie here! I am sharing My Sweet Valentine Card as my Design Team Inspiration Card for Conie Fong Art & Design using the beautiful Isabella Blossoms. This purchase includes 2 Images with girl facing right and left.
The Details of My Sweet Valentine Card
Valentine’ Day is coming up! So, I thought I would create a Valentine card with this beautiful lady. I coloured her in pinks and reds to match the Art Options Rouge Paper by 49 and Market. Love this paper and the matching Chipboard Elements! The paper has a lot of texture and design to it already. Therefore, my card didn’t need much to finished it off! Card making made easy!
Since my card was for Valentine’s Day, I pulled out a heart lace doily as a backdrop to my focal point. Then, I layered several chipboard elements to create my sentiment beside Isabella. I also added the “XOXO” chipboard flag at the top of my card.
Next, I added Clear Star Gelly roll pen to the centre of the flowers for sparkle. To soften the look, I lightly touched the centres with my finger to remove some of the gel. I also added Glossy Accents to the green pearls in her hair.
The finishing touch was a scattering of sequins and rhinestones that matched my colour scheme.
————————–
Copic Markers:
Skin: E000/E00/E21/E11/E04/R20 Hair: E49/E47/E44/E43 Pink Flowers: R85/R83/R81/Clear Star Gelly Roll Pen Red Flowers: R39/R37/R35R/32/Clear Star Gelly Roll Pen Green Pearls: G21/G94/G99/Glossy Accents
Close Up of Isabella
————————–
Card Recipe for My Sweet Valentine Card:
Isabella Blossoms, Conie Fong Art & Design Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink Value Pack Cards & Envelopes by Recollections, Michael’s Arts & Crafts Art Options Rouge 6” x 8” Paper Collection Pack, 49 and Market Art Options Rouge Chipboard Element Set, 49 and Market 4” Valentine’s Day Heart Doily, Celebrate, Michael’s Art & Crafts Valentine’s Day Bling Stickers, Recollections, Michael’s Art & Crafts Peppermint Stick Sequin Mix, Neat & Tangled Clear Star Gelly Roll Pen, Sakura Glossy Accents, Ranger
Finished card size: 5” x 6 ½”
————————–
To view my other Conie Fong Art & Design projects, please click here.
Hope you like my Design Team Inspiration Card using Isabella Blossoms for Conie Fong Art & Design!
Hello Crafty Friends! Laurie here again! I am sharing My Delightful Birthday Card using theFloral Delight Suite Collection from the new Stampin’ Up! 2025 Mini Catalogue. I have 6 family birthdays all within a week coming up at the end of January. So, I am in birthday card mode! One card done…just 5 more to go! Lol!
The Details of My Delightful Birthday Card
My card was for a demonstrator swap using new products from the January – April 2025 Mini Catalogue. So, I decided to use the beautiful Floral Delight Suite Collection. I just love the bright and cheery colours of the Floral Delight Designer Series Paper, ready to be used on cards and scrapbook pages for a touch of spring, summer, or autumn.
For my card, I decided to create a Z-fold card with the DSP on the front panel and an Eyelet Embossed Basic White piece on the inside, but still visible when the card was closed. The embossed piece added interest while not detracting from the focal point.
Top of Z-Fold
For the focal point, I decided to layer two circles from the Spotlight on Nature Dies. I thought that the delicate edging of the Daffodil Delight piece coordinated well with the embossed eyelet piece.
The Delightful Wishes Stamp Set is a Two-Step Stampin’ set; it allows you to layer two or more images to create one final image with extra texture and dimension in the colours you want. So, I used Daffodil Delight Ink to stamp the outline image first. I found that doing this first helped to line up the Lemon Lolly stamped main image. Next, I stamped the leaves in Old Olive to add some colour. I love the way this turned out creating a soft look behind the sentiments.
Card Standing Up
Next, for the sentiment, I decided to layer the “wishing” die cuts to create dimension with the Old Olive stamped sentiment nestled below.
Finally, as a finishing touch, I added a scattering of the sweet Tiny Bee Trinkets around my sentiment and on the Eyelet Embossed piece. A perfect accent to my card!
Supplies:
Stamps/Bundles/Dies: Delightful Wishes Bundle (164710), Spotlight on Nature Dies (163580)
Inks: Olive Classic Classic Stampin’ Pad (147090), Lemon Lolly Classic Stampin’ Pad (161666), Daffodil Delight Classic Stampin’ Pad (147094)
Paper: Pool Party (122924), Basic White (159276), Daffodil Delight (119683), Floral Delight 12” x 12” Designer Series Paper (164700)
Accessories: Eyelet 3D Embossing Folder (163414), Tiny Bee Trinkets (164714), Stampin’ Cut & Emboss Machine (149653), Stampin’ Paper Trimmer (152392), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Multipurpose Liquid Glue (110755)
Focal Point of Card
Measurements:
Pool Party:
8 ½” x 5 ½” scored at 4 ¼” and 2-1/8”
Scrap (for sentiment)
Daffodil Delight:
3 ½” x 3 ½”
Basic White:
2” x 5-3/8” (for front)
2” x 5-3/8” (for inside)
3” x 3” (for circle)
Scraps (for sentiments)
Floral Delight Designer Series Paper:
1-7/8” x 5 ¼”
More Information on My Delightful Birthday Card
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! It’s Laurie here! I am sharing my On Point Birthday Card as my Design Team Inspiration Card for Conie Fong Art & Design using the Succulent and Cactus Bundle.
This purchase includes 12 Images:
Echeveria In Pot
Echeveria In Pot Kawaii
Cactus Family
Bunny Ears Cactus
Bunny Ears Cactus Kawaii
Jade In Pot
Hoya Kerri Succulent
Potted Echeveria
Aloe Vera In Pot
Cactus Succulent Arrangement
Cactus Succulent Arrangement Kawaii
Aloe Sweet Friend Sentiment
The Details of My On Point Birthday Card
I just loved these cute Kawaiis with the eyes that I decided to colour the Cactus Succulent Arrangement Kawaii twice in different colours. One was for a friend’s birthday who loves succulents and the other was for a colour challenge at Kendra’s Card Challenges.
My Colouring of the Cactus Succulent Arrangement Kawaii
For my friend’s birthday card, I decided to use bright cheery colours for my colouring. I had a lot of fun colouring the succulent in two different tones of colours! I even gave the pot a variegated look! Lots of techniques from which to play!
I used the retired Succulent Garden Designer Series Paper from Stampin’ Up since it was perfect for the stamp. To create my focal point, I added some die cut succulents and aloe around my coloured stamp. These dies cuts were brushed with matching inks for a tone-on-tone look, but still added dimension. In addition to this, I used a roller-ball stylus in the centre of the succulents to make them pop up.
Don’t you just love the sentiment! What a hoot! And I knew my friend would get a kick out of it!
Finally, the finishing touches were rhinestones in the centre of the succulents and a strip of sheer ribbon.
Hello Crafty Friends! It’s Laurie here! I am sharing my Peace & Joy Christmas Card as my Design Team Inspiration Card for Conie Fong Art & Design using Molly Cutie from the Molly Winter Bundle. This Bundle includes 4 digital stamps:
Molly’s Winter Friends
Molly’s Joy
Molly Cutie
Molly Cutie Without Birdie
The Details of My Peace & Joy Christmas Card
I checked and this was my fourth time colouring different variations of this stamp! Lol! It is obviously one of my favourites of Conie Fong! The other three were before I was on Conie’s Design Team, and I will include them at the end of this post.
For my card, I had this gorgeous Merry Little Christmas Paper Collection by Paper Rose. So, I decided to use the piece that had the cardinal on it since I coloured the birdie as a cardinal this time. I also used the paper for the sentiment banner with the wood and Christmas word tickets.
The sentiment was foil embossed in gold with my laminator and gold foil. This is something that I have discovered recently and plan to do more often! So fun! I backed the foiled sentiment with a stitched circle from the red paper in the Collection. Tip: I die cut it out of the centre of the red mat that is behind my floral piece. Since you do not see it, it saved on paper.
The poinsettias were hand punched and assembled with gold glitter dots to mirror the poinsettia in the paper.
I had some punched glittery snowflakes on my desk from another card. So, I added them for interest.
Finally, for sparkle, I added some red rhinestones around her, as well as Star Dust Stickles to Molly’s and the bird’s pompoms. Clear Star gelly roll was added to the flowers on her dress with white gelly roll added to the polka dots on her scarf and gold gelly roll to her buttons. Glossy Accents was added to the berries that the birdie is carrying. You can never have too much sparkle on a Christmas card! Lol!
Molly Winter Bundle, Conie Fong Art & Design Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink Merry Little Christmas 6” x 6” Paper Collection, Paper Rose White Glimmer Paper, Stampin’ Up! Snowflake Border Punch, Martha Stewart Sentiment, Sassy LLC 2” Layering Stitched Circle Die, Memory Box 1 ¾” Circle Punch, Stampin” Up! Gold Foil, My Stash Laminator Laser Printer Gold Glitter Enamel Dots, Stampin’ Up! Clear Star Gelly Roll Pen, Sakura Gold Gelly Roll Pen, Sakura White Gelly Roll Pen, Sakura Star Dust Stickles, Ranger Glossy Accents, Ranger Red Rhinestone Basic Jewels, Stampin’ Up!
Real Red and Mossy Meadow Card Stock, Stampin’ Up!
Finished card size: 6” x 3 ½”
————————–
Molly’s Winter Friends
Molly Cutie
Molly Cutie
To view my other Conie Fong Art & Design projects, please click here.
Hope you like my Design Team Inspiration Card using Molly Cutie from Molly Winter Bundle for Conie Fong Art & Design!
Hello Crafty Friends! Laurie here again! I am sharing my Autumn Wishes Alternative Cards using the Autumn Abundance September 2024 Paper Pumpkin Kit by Stampin’ Up! Since this weekend is our Canadian Thanksgiving, I decided to create two alternative cards for the holiday!
But, first, here are the three cards that the kit makes. Perfect for this time of year!
Autumn Abundance September 2024 Paper Pumpkin Kit
The Details of My Autumn Wishes Alternative Cards
My Hey Pumpkin Card
For my first alternative card, I decided to do some colouring with my Stampin’ Blends using the girl with the pumpkins from the Warms My Heart Stamp Set. I thought she would suit my autumnal theme very well!
My Hey Pumpkin Card
I used the front half of the smaller leaves card to create a focal point for my girl. To separate her from the Leaf Fall 3D Embossing Folder that I used for the Wild Wheat background, I added a Cajun Craze die cut circle using the Spotlight on Nature Dies.
Next, I added the bronze foil leaf in the kit and two more leaves for which I used the add-on Every Celebration Dies. For embellishments, I added three Faux Glass Dots that matched my colour scheme.
Measurements:
Basic White Card Base:
8 ½” x 4 ¼”
3” x 2 ¼” (to stamp girl)
Wild Wheat:
5 ¼” x 4”
Scrap for leaf
Cajun Craze:
2-1/8” x 2-1/8”
Scrap for leaf
Kit Leaves Card Front:
4” x 4”
Other Pieces from Kit:
Bronze Leaf
Sentiment
My Triple Panel Card
For my second alternative card using the Autumn Abundance September 2024 Paper Pumpkin Kit, I made a triple panel card.
Since I had leftover the back of the smaller card, I used it for the front of this card. For the front panel, I die cut a Poppy Parade circle using the Spotlight on Nature Dies to layer behind my sentiment. I added some Linen Thread tied into a bow for my embellishment.
I made the Cajun Craze mat a little longer and scored it to create a tab that I tucked in behind the log DSP.
My Triple Panel Card
For the middle panel, I used the front of the log card base and then added a sentiment with stamped off leaves in Cajun Craze, Wild Wheat and Poppy Parade.
Panel 2 of My Triple Panel Card
Since I planned to send this card to my family for Thanksgiving, I wanted the final panel to say, “Happy Thanksgiving” and the sentiments from The Gift of Fall August 2019 Paper Pumpkin Kit were perfect for my card! They were stamped in Cajun Craze and Poppy Parade. One final leaf was stamped in Wild Wheat beside the sentiment.
Final Panel of My Triple Panel Card
Measurements:
Cajun Craze:
8 ½” x 4 ¼”
4 ¼” x 6” with score mark at 4 ¼” (tuck tab behind log DSP)
3 ½” x 3 ½”
Basic White:
3 ¼” x 3 ¼”
4” x 5 ¼”
Kit Leaves Card Front:
4” x 4”
Kit Log Card Front:
4” x 5 ¼”
Other Pieces from Kit:
Snail
Log
Mushroom
Leaves
Cajun Craze Strip
Sentiment
More Information on My Autumn Wishes Alternative Cards
For more of my Stampin’ Up! paper Pumpkin cards, please click here.
You will find the items listed above in my online store
Hello Crafty Friends! It’s Laurie here! I am sharing my Aloe Sweet Friend Card as my Design Team Inspiration Card for Conie Fong Art & Design using the Succulent and Cactus Bundle.
This purchase includes 12 Images:
Echeveria In Pot
Echeveria In Pot Kawaii
Cactus Family
Bunny Ears Cactus
Bunny Ears Cactus Kawaii
Jade In Pot
Hoya Kerri Succulent
Potted Echeveria
Aloe Vera In Pot
Cactus Succulent Arrangement
Cactus Succulent Arrangement Kawaii
Aloe Sweet Friend Sentiment
The Details of My Aloe Sweet Friend Card
I just loved these cute Kawaiis with the eyes that I decided to colour the Cactus Succulent Arrangement Kawaii twice in different colours. One was for a friend’s birthday who loves succulents and the other was for a colour challenge at Kendra’s Card Challenges.
My Colouring of the Cactus Succulent Arrangement Kawaii
For the colour challenge card, I used Copic marker combos that would be like the colours listed below. Kendra had succulent and cactus digital papers that you could download with the colours for the challenge, but in the end, I decided to use Flowering Cactus Designer Series Paper instead.
Kendra’s Card Challenge – Color Challenge
The Potted Succulent Dies had a beautiful detailed outline die that covered the whole card front. So, I decided to use it with the DSP peeking out from under it. Since this piece was so detailed, I didn’t add a lot to my card, other than the focal point and the sentiments.
I used the largest Stylish Shaped circle die to add a circle from the DSP and placed it behind my image to anchor it. The sentiments were also die cut from the Stylish Shaped Dies. I added Calypso Coral frames from the Potted Succulents Dies to the sentiments to help distinguish them from the background.
Don’t you just love the pun of the sentiment, “Aloe Sweet Friend” which comes with the Bundle. For the other sentiment, I typed it on my computer, printed it and die cut it out.
Finally, the finishing touch was a scattering of Calypso Coral sequins around my focal point.
Hello Crafty Friends! Laurie here again! I am sharing my Time for Cake Alternative Cards using the August Time for Cake Paper Pumpkin Kit by Stampin’ Up! I created three alternative cards using the Kit. Two fun folds and a regular card. But, first, here are the three cards that the kit makes. Perfect for those birthday cards that everyone needs!
Cards from the August Time for Cake Paper Pumpkin Kit
The Details of My Time for Cake Alternative Cards
Make a Wish Card
Make a Wish Card
For my first alternative card, I decided to create a Thick Basic White card base with the floral Night of Navy card base adhered to it. I trimmed down the candles DSP to fit on my card front and added a Pretty in Pink mat to one side.
Close Up of Focal Point
I couldn’t resist cutting apart one of the Pretty in Pink envelopes to use as a strip on my card! I turned the tag over to stamp on the white side and added a candle over the hole to hide it. The other sentiment was stamped on the Pretty in Pink piece from the cake card. Finally, I added some Rhinestone Jewels to the candle flames for sparkle.
Measurements:
Basic White Card Base:
8 ½” x 4 ¼”
Pretty In Pink Mat:
2” x 4”
Candle DSP:
3” x 3 ¾”
Envelope DSP:
2” x 4 ½”
Other Pieces from Kit:
Floral Night of Navy
Tag
Pretty in Pink Sentiment Strip
Candle
Triple Fold Bridge Card
For my second alternative card using the Time for Cake August 2024 Paper Pumpkin, I made a triple fold bridge card! Love the free stamp set with the numbers! Perfect for those special milestone birthdays!
Triple Fold Bridge Card
I took the Petal Pink card base and cut 1” on either side up to the card fold to create three panels.
For the front, I used part of the candle DSP and stamped 80th on it from the free stamp set. This was matted with Night of Navy and then a strip of Pretty in Pink was added to make sure that this bridge was securely in place.
Close Up of Focal Point
Next, I stamped the Happy birthday sentiment on the banner. To make the banner stand out from the white in the background, I sponged Pretty in Pink onto the edges. The Hooray was die cut from some Rose Gold Foil that I had from another project. The finishing touch was some Rhinestone Jewels to the candle flames for sparkle.
Inside Panel of Card
Now that the front was decorated, it was time to decorate the inside panel. I used half of the balloon DSP from the Kit and matted it with Night of Navy. Since the balloons had a white space in the centre, it was the perfect place to add my sentiment. I love that the sides of inside layer of the card can be seen before you open it!
Inside of Card
For the inside of the card, I used strips of the envelope DSP from the previous card to add borders to a Basic White piece. These were both matted with Night of Navy. The sentiment was stamped, and a candle added.
Measurements:
Card Base:
From Kit
Pretty In Pink Mat:
3 ¼” x 4 ½”
Night of Navy Mats:
4” x 3 ¾” (Front)
3 ½” x 2 ½” (Balloon Piece)
4”x 5 ¼” (Inside)
Candle DSP:
3 ¾” x 3 ½”
Balloon DSP:
3 ¼” x 2 ¼”
Envelope DSP (2):
3 5/8” x ¾”
Basic White (Inside):
3 ¾” x 5”
Other Pieces from Kit:
Banner
Pretty in Pink Sentiment Strip
Candle
Pop-up Box Card
Here is my last alternative card using the Time for Cake August 2024 Paper Pumpkin, I made a fun pop-up box card that is sure to impress!
Pop-up Box Card
For my card, I thought it would be fun to have the balloons suspended over a box! To make my card, I used a lot of bits from the different cards and envelopes, but it was well worth it!
So, I created the box according to the measurements below and added the tabs for the balloons on the inside. Note: adhere the tabs to one side of box. Then, adhere to the other side of tabs and box tab. Fold flat and tuck in the tabs so that they adhere to the other side of box.
I used the Candle DSP to decorate the top flaps. For the front flap, I added the banner and two candles. Unfortunately, the banner does stick out when the card is folded down. So, I had to use a larger envelope for it.
View of the Balloons
Next, I used pieces of an envelope to decorate the outside of the box. You could decorate the top outside flaps too, but I decided not to since I didn’t want to use another envelope.
The balloon DSP was left over from the other card, and I trimmed it down to fit.
Top View
For the balloons, I used a thin strip of Window Sheet that I adhered to the balloons and to the tabs. I made sure to hold them in place while the glue set. I placed the larger balloon at the back with the smaller ones at a slight angle in front of it. Note: make sure that when the card is closed that the balloons do not extend above the card top or sides.
Back View
The final piece was the stamped Basic White piece for the message.
Measurements:
Card Base:
5 ½” x 8 ½”:
Score at 2”, 4” 6” 8” along 8 ½” side
Score down middle at 2 ¾” of 5 ½” side
Cut each score mark until reach middle score mark (2 ¾”)
Cut off the narrow tab at 2 ¾” and trim at angle the remaining piece
Tabs (2):
¾” x 3 ¼”
Score at 5/8” on both sides
Candle DSP:
2 ½” x 1-7/8” (3 pieces)
Envelope DSP:
2 ½” x 1-7/8” (3 pieces)
Balloon DSP:
3 ¼” x 1-7/8”
Basic White (Sentiment):
5 ¼” x 1 ¾”
Window Sheet: 1 ½” X ½” (3 pieces)
Other Pieces from Kit:
Banner
Candle
Hooray
Balloons
More Information on My Time for Cake Alternative Cards
For more of my Stampin’ Up! Paper Pumpkin cards, please click here.
You will find the items listed above in my online store.
Hello Crafty Friends! It’s Laurie here! I am sharing My Flutterby Birthday Card as my Design Team Inspiration Card for Conie Fong Art & Design using the sweet Flutterby Daisy.
For my card, I decided that I wanted to use Flutterby Daisy facing left with her daisy. I loved colouring her and her daisy with my Copic markers in bright cheery colours to match my Mintay papers. Flutterby comes with one butterfly, but I thought a couple of extra butterflies would add a touch of fun to my card!
Close Up of Flutterby
I found this beautiful Daisy Circle Frame a while back and thought it would be perfect for the backdrop of Flutterby! So, I die cut it in a colour that matched my colouring of her daisy and the papers.
Since I wanted to create a birthday card, I used the sentiment from the Dandelion Wishes stamp. Perfect for a fairy birthday card! Though I did use “Fluttering by with a friendly hi” for the inside of my card.
Next, I added a butterfly die cut border of the Mintay papers along the bottom of the card with it overlapping the daisy in places hiding the stem end of the coloured daisy.
Finally, the finishing touch was a scattering of Berry Burst Shimmer Gems around my card.
————————–
Copic Markers:
Skin: E000/E00/E21/E11/E04/R20 Hair: E49/E47/E44/E43 Dress: YG67/YG63/YG03 Wings: BG13/BG11/BG10/Star Dust Stickles Flowers: RV69/RV66/RV63 Dark Blue Butterfly: BG09/BG05/BG01/BG000/Clear Wink of Stella Light Blue Butterfly: BG13/BG11/BG10/Clear Wink of Stella Green Butterfly: YG67/YG63/YG03/Clear Wink of Stella
Flutterby
————————–
Card Recipe for My Flutterby Birthday Card:
Flutterby Daisy, Conie Fong Art & Design Dandelion Wishes, Conie Fong Art & Design Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink Better Times 6” x 6” Paper Pad, Mintay Papers– Daisy Circle Daisy Circle Frame Die, Creative Expressions Unbounded Love Dies, Stampin’ Up! Butterfly Border Die, Joy Crafts Purple Fine Shimmer Gems, Stampin’ Up! Star Dust Stickles, Ranger Clear Wink of Stella, Stampin’ Up!
Berry Burst Card Stock, Stampin’ Up!
Finished card size: 5 ½” x 5 ½”
————————–
To view my other Conie Fong Art & Design projects, please click here.
Hope you like my Design Team Inspiration Card using Flutterby Daisy for Conie Fong Art & Design!
Hello Crafty Friends! Laurie here again! I am sharing my Just a Little Note Card using the Penciled Pear Stamp Set by Stampin’ Up! Since masculine cards are so hard to make, I decided to create a masculine card with this stamp for a swap. In fact, I made 2 different cards with similar layouts.
My Two Variations
The Details of My Just a Little Note Card
For my card, I knew that I wanted to watercolour the pear with my Water Painters and ink that I squished onto my glass mat. Such a fun technique that allowed me to pick up as much ink as I needed!
Ink Pools
So, I heat embossed in black my stamped pear on watercolor paper. Tip: the heat embossing created a raised edge that kept the ink in the lines. Once that was done, I water coloured the pear in different colours since they can come in various shades of colours until they ripen. To add interest, I picked up the different inks on my brush and splattered it into onto the watercolor paper.
I matted the finished water coloured piece onto Old Olive and Basic White card stock to create my focal point.
Close Up of Focal Point
The sentiment was stamped in Black, die cut out and linen thread was added beneath it. The pears stamp was stamped multiple times in Crushed Curry onto Crush Curry card stock to add even more interest. This was matted with Basic White.
Next, I embossed the Early Espresso card stock with Timber 3D Embossing Folder to add to the masculine feel of my card.
The finishing touch was Adhesive-Backed Textured Dots in the opposite corner from my sentiment. Don’t you think these dots look like golf balls (hmmm ideas! lol!)? Very masculine!
Supplies:
Stamps/Bundles/Dies: Penciled Pear Stamp Set (163526), Stylish Shapes Dies (159183)
Inks: Early Espresso Classic Stampin’ Pad (147114), Crushed Curry Classic Stampin’ Pad (147087), Old Olive Classic Stampin’ Pad (147090), Cajun Craze Classic Stampin’ Pad (147085), VersaMark Ink (102283), Tuxedo Black Memento Ink Pad (132708)
Paper: Basic White Thick Cardstock (159229), Early Espresso (119686), Basic White (159276), Crushed Curry (131199), Old Olive (100702), Fluid 100 Watercolor Paper (149612)
Accessories: Timber 3D Embossing Folder (156406), Adhesive-Backed Textured Dots (163338), Linen Thread (104199), Water Painters (151298), Basics Embossing Powder (165679), Heat Tool (129053), Embossing Additions Tool Kit (159971), Stampin’ Glass Mat Studio (163987), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)
Measurements:
Basic White Thick Cardstock:
8 ½” x 5 ½” scored at 4 ¼”
Early Espresso:
5 3/8” x 4-1/8”
Basic White (3 pieces):
4-1/8” x 2-3/8”
3 ½” x 3”
Scrap for Sentiment
Crushed Curry:
4-1/8” x 2 ¼”
Old Olive:
2-7/8” x 3-3/8”
Watercolor Paper:
2 ¾” x 3 ¼”
My Other Variation
More Information on My Just a Little Note Card
For more of my Stampin’ Up! cards, please click here.
You will find the items listed above in my online store
Hello Crafty Friends! It’s Laurie here! Christmas in July might be over, but I am still adding to my Christmas card supply. Lol! So, I am sharing My Poinsettia Season Card as my Design Team Inspiration Card for Conie Fong Art & Design using the sweetHolly Poinsettia.
The Details of My Poinsettia Season Card
I loved colouring Holly with her poinsettias using my Copic markers! She is such a sweetie!! I used colours to match the gorgeous Mintay paper! To add some sparkle, I used Star Dust Stickles on her ear muffs and pom poms on her mittens.
Of course, I had to use a tag from the matching Paper Elements for my backdrop of Holly. To tie in the greens of my colouring, I gave the tag a mat with one of the papers in the pad.
The Paper Elements also came with some envelopes that you make. I thought the floral envelope with the blue background perfectly matched my colour scheme. So, I trimmed a piece off the envelope and cut it in half. These pieces I matted with white and placed them in opposite corners of my tag so that they are peeking out from my focal point.
Since Holly had poinsettias, I decided to use my Poinsettia and Holly Punch by Nellie to make some paper flowers. The flowers were accented with Gold Glitter Enamel Dots. The gold centres mirrored the gold Gelly Roll Pen that I used on Holly’s poinsettias.
The sentiment was stamped in black and die cut out with matching the die.
Finally, the finishing touch was a scattering of red rhinestones around my card.
