Beyond the Horizon Alternative Cards

Alternative Cards using the March 2022 Paper Pumpkin
Beyond the Horizon Alternative Cards

Hello Crafty Friends! Laurie here again! I am sharing my Beyond the Horizon Alternative Cards using the March 2022 Beyond the Horizon Paper Pumpkin. I loved this kit! It was perfect for all those masculine cards that you need to make. And I loved that it coordinated with the New Horizons Suite Collection!

I loved this Kit so much, that I created several alternative cards! I have gone into detail for my Mini Slimline Tri-Fold Window. At the end of this post, I have photos of all the other alternative cards with brief descriptions.

Details of My Mini Slimline Tri-Fold Window Card

For my first card, I decided to create a mini slimline Tri-Fold Window Card by combining the Paper Pumpkin Kit and the New Horizons Suite Collection. I thought it would be neat to see the beautiful water coloured scene peeking out of the windows between the mountain die cuts that came with the kit!

How to Cut the Card Base

The Misty Moonlight card base is 6” x 10.5” and scored at 3.5” and 7” along the long side to create 3 panels. I used the 2 largest retired Stitched Squares to create my windows for the scene. The largest Square on the outside panel and the next size down on the inside panel.

The Front Panel

Front of Tri-Fold Card

I cut apart 2 envelopes to use for my background pieces in Old Olive and Bumblebee. The Old Olive piece was on the front panel and the Bumblebee was on the right inside panel.

Tip: since the envelopes are thinner than card stock, you can glue them down and cut both the panel and the envelope at the same time.

The envelopes are printed on both sides. So, I was able to flip over leftover pieces where I needed another design such as the cross hatching on the front panel and the Misty Moonlight dotted piece. 

I used a small piece of the In Good Taste DSP for my fence to give it a wooden look. Don’t you just love the Pebbles Enamel Shapes! I couldn’t resist using them on three of my panels!

Close Up of Scene Through The Windows

The Right Inside Panel

I thought that the mountain dies that came in the Kit would be perfect to layer on the bottom of the Bumblebee window. Almost like you are looking through mountains at the scene.

Right Inside Panel

For this panel, I stamped the sentiment in Misty Moonlight onto a die cut Crumb Cake wood piece. Then I and layered it in front of a scrap of the dotted Misty Moonlight envelope.

Mountain Die Cuts with Scene

The Inside Panels

For the inside panels, I used leftover pieces of the envelopes under the windows and layered the leftover stitched squares on top.

For the left panel, I created a scene using the die cut trees from the Collection and the circle from the kit. Don’t you think the circle looks like a sun! I even used the trimmed top of the water-coloured piece for my sky behind the stitched square. I don’t throw anything out just in case I can use it.

Inside With All Panels Open

For the inside panel on the right, I used the sentiment from the floral stamp set that was the gift in the kit. I added some grasses and those pebbles again.

For the center piece, I added a Basic White mat to frame the water-coloured piece allowing an area to write.

Supplies:

Stamps/Bundles/Dies: New Horizons Suite Collection (157782)

Inks: Crumb Cake Classic Stampin’ Pad (147116), Misty Moonlight Spot (From Kit)

Paper: Misty Moonlight (153081), Basic White (159276), Old Olive (100702), In Good Taste Designer Series Paper (152494), New Horizons 6″ x 6″ Designer Series Paper (157768)

Accessories: 1/8″ Cotton Ribbon Combo Pack Paper (158140), Pebbles Enamel Shapes (158141), Retired Stitched Rectangles, Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

My Other Alternative Cards

Second Alternative Card

Second Alternative Card

This one of my alternative cards using the March Paper Pumpkin that I made for my Father-in-law’s birthday! It is based on the mini slimline design that they show on the back of the instruction sheet, but, of course, with a few tweaks from me.

I decided to use In Good Taste DSP for my fence to give it a wood texture. Since the card was for my FIL, I decided to use Old Olive card stock for the Time to Celebrate sentiment with the Lovely Labels Pick a Punch. A simple knot suited my FIL’s taste more than a bow. I used my Stampin’ Blends in Dark Old Olive and Dark Misty Moonlight to colour some rhinestones to match the New Horizons DSP.

Third Alternative Card

Third Alternative Card

I based this alternative on a mini slimline card, but I used the remainder of the New Horizon Designer Series Paper from the previous card. Since the DSP didn’t fill the background, I added a leftover piece of envelope behind the white embossed piece. I decided to use the Shaded Spruce die cut mountains that matched the jagged piece from the kit to create a base for my sentiment. For embellishments, I used the ribbon and the rhinestones from the Kit.

Fourth Alternative Card

Fourth Alternative Card

For this alternative, I decide to make a full A2 card using Misty Moonlight for the card base. I framed the scene with a Basic White frame, but if you were carefully with your trimming, you could use the card front with no frame. Then I add the wooden fence with die cut grass in front to balance the die cut mountains, circle and sentiment.

Fifth Alternative Card

Fifth Alternative Card

For my last alternative, I decided to cut apart one of the card fronts and added them to an Old Olive card base. I layered the sentiment on some leftover pieces from the Kit. I then added Misty Moonlight ribbon and rhinestones for my embellishments.

The Cards from the Kit

The Cards That the Kit Makes

More Information on my Beyond the Horizon Alternative Cards:

For more of my Stampin’ Up! cards, please click here.

To view my Paper Pumpkin Alternatives for other kits, please click here.

My Super Birthday Cards

My Super Birthday Cards
My Super Birthday Cards

Hello Crafty Friends! Yesterday was a little boy’s birthday and a few weeks ago was a big boy’s birthday. The big boy collects comics especially Superman and the little boy sent me a card with a Superman stamp on the envelope. So, I pulled out my Save The Day Grab and Go Box by Stamp Anniething to make My Super Birthday Cards.

The Details of My Cards

I love that this Grab and Go Box has everything you need to make your card including paper, adhesive, card bases and more! I stamped my super heroes twice and used my Copic Markers to colour them. Then I die cut them out using the matching die included in the box.

My Super Birthday Card - Version 1
My Super Birthday Card – Version 1

My cards were quick ones to make since I mainly used the Save the Day paper sheets and the Comic Mat Die that come with the box. For one card, I pulled out the Background Scene Stencil and did some inking directly onto the white panel that was cut out from the Comic Mat Die. Next, I stamped the sentiment in black and just placed it back into the empty slot on the mat. The other panels were filled with different papers. I love the “Suddenly” just like in the old comics! I stamped the Whoosh!, coloured them with my Copic markers and then added Glossy Accents to make them pop. A few sequins add to the sparkle of the card.

My Super Birthday Card - Version 2
My Super Birthday Card – Version 2

For my other card, I decided to use the “POW” from the paper since the big birthday boy would get a kick out of it from the old TV shows that we use to watch.

One final piece was that I put my super heroes onto Action Wobbles. How fun is that! The recipient can have them wobble on the card! Check it out!

Video of Wobble in Action
Video of Wobble in Action

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: C9/C7/C5/C3
Blues: B18/B26/B24
Reds: R39/R37/R35
Yellows: Y32/Y38

Close Up of My Card
Close Up of My Card

————————–

Card Recipe for My Super Birthday Cards:

Save The Day Grab and Go Box, Stamp Anniething
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
#1 Stamp, Save The Day Grab and Go Box, Stamp Anniething
#7 Stamp, Save The Day Grab and Go Box, Stamp Anniething
#8 Stamp, Save The Day Grab and Go Box, Stamp Anniething
Metal Die Outlines, Save The Day Grab and Go Box, Stamp Anniething
6” x 6” Paper Sheets, Save The Day Grab and Go Box, Stamp Anniething
Comic Mat Die, Save The Day Grab and Go Box, Stamp Anniething
Background Scene Stencil, Save The Day Grab and Go Box, Stamp Anniething
Tuxedo Black Memento Ink Pad, Stampin’ Up!
Pacific Point, Stampin’ Up!
Blending Brushed, Stampin’ Up!
Action Wobbles, My Stash
Metallic Sequin Assortments, Stampin’ Up!
Glossy Accents, Ranger
Thick Whisper White Card Stock, Stampin’ Up!

Finished card size: 5.5” x 5.5”

————————–

To view my Copic cards, please click here.

Hope you like My Super Birthday Cards using the
Save The Day Grab and Go Box from Stamp Anniething!

Thank you for stopping by!

Hugs,
Laurie

Soar Confidently Birthday Card

Birthday Card
Soar Confidently Birthday Card

Today is I am sharing my Soar Confidently Birthday Card that I made for my father-in-law’s birthday that was yesterday using the Soar Confidently Stamp Set. My father-in-law loves planes, and I knew that a card with the plane from this set would be perfect for him! I just happened to decide to use all the images, as well as the plane.

The Details of My Card

Since the images look vintage, I decided to create an old world feel to my card. So, once I stamped my images on Very Vanilla card stock, I used my Blender Pen to “colour” the stamped images in certain areas where the line art was the strongest. I then fussy cut the stamped images out with my Paper Snips. To give my card more of a vintage feel I sponged ink along the edges. I usually don’t mix Very Vanilla and Basic White but thought the vintage look I was going for allowed it to work.

I decided to use the World of Good Designer Series Paper since it is perfect for a masculine card! Specifically, the one with the compasses on the Misty Moonlight background which reminded me of a blue sky. This paper is retiring and is currently on sale!

For my card, I wanted all the different flying machines to be in the air. So, I need some clouds which is where the Mountain Air Bundle came into effect. I stamped them in Misty Moonlight, but stamped off twice before stamping them on the Basic White card stock to give them a soft fluffy look.

I stamped the sentiment in a Stitched Rectangle, add a couple of banners with one in copper foil to match the copper stars from the Star Designer Elements.

Supplies:

Stamps/Bundles/Dies: Soar Confidently Stamp Set (154531), Mountain Air Bundle (153820), Stitched Rectangles Dies (151820), Tasteful Labels Dies (152886)

Inks: Misty Moonlight Classic Stampin’ Pad (153118), Early Espresso Classic Stampin’ Pad (147114)

Paper: Early Espresso (119686), Very Vanilla (101650), Basic White (159276), World of Good Designer Series Paper (152491), Copper Foil Sheets (142020)

Accessories: Star Designer Elements (150430), Blender Pens (102845), Stamping Sponges (141337), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Glue Dots (103683)

Close Up of my Card
Close Up of My Soar Confidently Birthday Card

Measurements: 

  • Early Espresso: 5 ½” x 8 ½” scored at 4 ¼”
    • ½” x 2 3/16” (banner)
  • World of Good Designer Series Paper: 5 ¼” x 4”
  • Basic White: 5 ¼” x 4” (inside piece)
    • 3 pieces: 1 7/8” x 5/8” (for clouds)
    • 1” x 2 3/8” (sentiment)
  • Very Vanilla: 3 ½” x 4 ½”
  • Copper Foil Sheets: ½” x 2 3/16” (banner)

For Further Info:

Hope you like my Soaring Confidently Birthday Card.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Have A Spooktacular Birthday Card

My Have a Spooktacular Birthday Card
My Have a Spooktacular Birthday Card

Hello Crafty Friends! It’s Laurie here with my Have a Spooktacular Birthday Card. Today is my Hubby’s birthday! He’s been hinting at a Scooby Doo card since I made one for my brother back in May (I have posted it at the end) or a Halloween card. So, I made him both! I coloured with my Copic markers the Teen Detectives from Kindred Stamps for the 30 Day Coloring Challenge in June in anticipation of this card. My card is a slimline card since they are all the rage right now.

Instructions for
Have a Spooktacular Birthday Card

I had a ton of fun creating the spooky graveyard scene with lots of sponging and masking! The moon and the ground were masked while sponging Rich Razzleberry around the moon, Night of Navy for the sky and Memento at the edges of the sky. Next, I sponged the ground in Old Olive. Since it is a lighter colour then Night of Navy, I didn’t have to bother masking the sky. I added some hills by using the same masks and lightly sponging some black ink on different angles. Once I removed the masks, I stamped the grave stones and bats in black ink.

My Have a Spooktacular Birthday Card
My Have a Spooktacular Birthday Card with Shaggy and Scooby Running Away

I added a slider mechanism for Shaggy and Scooby since they are always running away from the scary monsters in the series! LOL! And in this case, it is the cute ghosts that are immerging from the graveyard! The Large Slimline with Sliders Dies comes with sliders, but I found that they were too long for what I wanted. So, I created my own using the retired Classic Label Punch by Stampin’ Up! I punched one and a half times overlapping in the area I wanted the slider to be. I used some pennies and dimensionals to create my sliders.

A die cut spooky fence, tree and spider with Shimmery Crystal Effects to make it glitter add to the Spooktacular scene!

————————–

Copic Markers:

Fred
Skin: E000/E00/E21/E11/E04
Hair: YR24/Y35/Y13/Y11/Y00
Scarf: YR09/YR16/Y17
Shoes: E50/E53/E55
Pants/ shirt collar: B18, B26, B24, B12, B41 
Sweater: C0/C1/0

Velma
Skin: E000/E00/E21/E11/E04/R20
Hair: E57/E37/E08/E15/YR27
Skirt: E37/E08/E15
Shirt: E57/E15/YR27
Magnifier: W4/0

Close Up of Fred and Velma

Shaggy
Skin: E50/E51/E53
Hair: E57/E25/E99/YR27/YR24
Shirt: G07/YG09/YG06
Pants: E37/E08,/E15
Shoes: W8/W6/W4

Daphne
Skin: E50/E51/E53/R20
Lips: RV34
Hair: E08/YR18/YR07/YR04/Y17
Scarf: G07/YG09/YG05
Dress/Shoes/Headband: BV04/BV00/BV02
Stripes/Tights: V12/V01/RV00

Scooby
Fur: E27/E25/E23/W9
Collar: BG45/BG01
Tongue/Ears: RV34/RV32
Nose: W9/W7/W5/0

Close Up of Shaggy, Scooby and Daphne
Close Up of Shaggy, Scooby and Daphne

————————–

Card Recipe for
Have a Spooktacular Birthday Card:

Teen Detectives, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Large Slimline with Sliders, Lawn Fawn
Spooky Fence Die-Namics, My Favorite Things
Halloween Scene Edgelits, Stampin’ Up!
Wicked Dies, Stampin’ Up!
Cauldron Framelits Dies, Stampin’ Up!
Caldron Bubble Stamp Set
Spooky Village Stamp Set, Lawn Fawn
Graveyard Gate Stamp Set, Stampin’ Up!
Classic Label Punch, Stampin’ Up!
Glossy Accents
Shimmery Crystal Effects, Stampin’ Up!
VersaMark Ink
Shimmery White Stampin’ Emboss Powder, Stampin’ Up!
Rich Razzleberry Classic Stampin’ Pad, Stampin’ Up!
Night of Navy Classic Stampin’ Pad, Stampin’ Up!
Tuxedo Black Memento Ink Pad, Stampin’ Up!
Old Olive Classic Stampin’ Pad, Stampin’ Up!
Stampin Sponges, Stampin’ Up!
Basic Black, Night of Navy, and Whisper White Card Stock
2 Pennies for slider
Finished card size: 8.5” x 3.5”

————————–

My other Teen Detectives Card that I made for my brother. I used the same colours of the characters for both cards.

————————–

You tried to hide your birthday & you would have gotten away with it if it wasn’t for those pesky kids!.

To view my other Copic cards, please click here.

Hope you like my Have a Spooktacular Birthday Card using Teen Detectives by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

My Roll With It Shaker Card

My Roll With It Shaker Card
My Roll With It Shaker Card

Tomorrow is my Hubby’s birthday! So, today I am sharing with you my Roll With It Shaker Card that I plan to give to him. I thought a shaker card would be so fun! It is using two stamp sets, Whiskey Business and Game On, that are perfect for him! We love to play games and have game time with our friends and family on a regular basis! Now he can shake the card and his dice will always come up 6 and 5! LOL! I even coloured the dice with the Real Red and Just Jade Stampin’ Blends to match the ones that he uses. In addition to gaming, he loves his single malt scotch and is always trying different types.

Details of My Roll With It Shaker Card

For my card, I wanted to create a masculine feel. So, the In Good Taste Designer Series Paper with Early Espresso card stock was perfect for it! I use the two largest Stitched Nested Labels to create my window frame. I stamped the checkerboard in Memento Black off twice before I randomly stamped it a third time on my Whisper White background piece. Once I did this, I created my shaker part with Foam Adhesive Strips, a piece of Window Sheet, a pinch of Woven Threads Sequins and my “dice”.

For the dice and the scotch, I stamped them on Whisper White with Memento Black. I then used my Stampin’ Blends to colour them. The dice were Real Red Dark/Light and Just Jade Dark/Light with Cinnamon Cider Dark/Light for the ground. The Scotch was Cinnamon Cider Dark/Light and Mango Melody Dark with Balmy Blue Light and Color Lifter for the glass. Once these were coloured, I fussy cut them out.

The sentiment stamped in Memento Black from Game On with a splash of Real Red behind it was perfect for my card! The finishing touch was decorating the inside by combining the two stamp sets again to create my sentiment.

Inside of Close Up of Dice from My Roll With It Shaker Card
Inside of Close Up of Dice from My Roll With It Shaker Card

My Roll With It Shaker Card in Action

My Roll With It Shaker Card in Action
My Roll With It Shaker Card in Action

Here is a video that I presented to some fellow demonstrators that shows how to colour with Stampin’ Blends the decanter from the Whiskey Business Stamp Set.

My Whiskey Business Colouring Tutorial
My Whiskey Business Colouring Tutorial

Supplies:

Stamps: Whiskey Business Stamp Set (152550), Game On Stamp Set (152646)

Dies: Stitched Nested Labels Dies (149638)

Inks:Tuxedo Black Memento Ink Pad (132708)

Paper: Real Red (102482), Early Espresso (119686), Whisper White (100730), Window Sheets (142314), In Good Taste Designer Series Paper(152494)

Accessories: Woven Threads Sequin Assortment(149498), Cinnamon Cider Stampin’ Blends Combo Pack (153105), Mango Melody Stampin’ Blends Combo Pack (154888), Balmy Blue Stampin’ Blends Combo Pack (148544), Stampin’ Blends Color Lifter (144608), Paper Snips (103579), Bone Folder (102300), Stampin’ Seal (152813), Stampin’ Dimensionals (104430), Foam Adhesive Strips (141825), Mini Glue Dots (103683)

Measurements: 

  • Early Espresso: 2 pieces of each
    • 8 ½” x 5 ½”; scored at 4 ¼”
    • 5” x 2 5/8” (shaker frame)
  • Whisper White: 4 pieces of each
    • 5” x 3” (background piece)
    • Scraps (dice, decanter, glass)
    • 3” x ½” (sentiment)
    • 4 ¾” x 4” (Inside of card)
  • Real Red: 2 pieces of each:
    • 5” x 4 ¼” (Inside of card)
    • Scrap
  • Window Sheet: 5” x 3”
  • In Good Taste Designer Series Paper: 5” x 4 ¼”

For Further Info:

Hope you like my Roll With it Shaker Card!

For another Whiskey Business Card, check out this link.

You will find the items listed above in my online store.

My Whiskey Business Card

My Whiskey Business Card
My Whiskey Business Card

I was honoured to be asked to virtually demonstrate in a Facebook Live my Blends Colouring Techniques to some fellow demonstrators. So, I thought I would share for Technique Tuesdays some of my colouring techniques from the live video each week highlighting a card that I presented. The first card that I am highlighting this week is my Whiskey Business Card. I hope you will check back each week and maybe learn something new!

This card is perfect for that man in your life who loves his whiskey! This can be a Father’s Day card, a birthday card, a congratulations card…so many options. For this card, I wanted to create an old-world library kind of feel with the whiskey on a brass platter waiting for someone to help themselves. The World of Good Designer Series Paper with the wood image lends itself very well to that feel. The Early Espresso Faux Suede Ribbon and the buckle from the Antiqued Corners & Slides Elements both add to this feel as well.

Close Up of My Colouring for My Whiskey Business Card
Close Up of My Colouring for My Whiskey Business Card

Supplies:

Stamps: Whiskey Business Stamp Set (154091)

Inks: Tuxedo Black Memento Ink Pad (132708)

Paper: Whisper White Thick (140272 ), Early Espresso (119686), Whisper White (100730), Brass Foil Sheets (153057), World of Good Designer Series Paper (152491)

Accessories: Stitched Shapes Dies (152323), Tasteful Labels Dies (152886), Tasteful Textile 3D Embossing Folder (152718), Antiqued Corners & Slides Elements (152471), Early Espresso Faux Suede Ribbon (152472), Cinnamon Cider Stampin’ Blends Combo Pack (153105), Mango Melody Stampin’ Blends Combo Pack (154888), Balmy Blue Stampin’ Blends Combo Pack (148544), Stampin’ Blends Color Lifter (144608 ), Paper Snips (103579), Bone Folder (102300), Adhesive Sheets (152334 ), Multipurpose Liquid Glue (110755 ), Mini Glue Dots (103683), Stampin’ Seal (152813), Stampin’ Dimensionals (104430)

Measurements: 

  • Whisper White Thick: 8 ½” x 5 ½”; scored at 4 ¼” 
  • Early Espresso: 2 pieces
    • 4 1/8” x 5 3/8” (for mat)
    • 3 ¼” x 3 ¼” (for circle)
  • World of Good Designer Series Paper: 4” x 5 ¼”
  • Brass Foil Sheets: 3 ¾” x 2”
  • Whisper White – 2 pieces: 3 ¼” x ½” (sentiment)
    • Scrap large enough to stamp glasses and tumbler
  • Early Espresso Faux Suede Ribbon: 6”

Instructions:

  1. Fold the Whisper White Thick card stock in half to create the card base.
  2. Stamp the whiskey decanter and glasses in Tuxedo Black Memento Ink Pad on the scrap of Whisper White
  3. Die cut the Early Espresso card stock with the largest Stitched Circle Die
  4. Emboss the stitched circle with the Tasteful Textile 3D Embossing Folder
  5. Die cut the Brass Foil piece with the appropriate Tasteful Labels Dies
  6. Colour the whiskey decanter and glasses with Cinnamon Cider and Dark Mango Melody for the liquid and Light Balmy Blue and Color Lifter for the glass according to the video:
Whiskey Business Colouring Tutorial Video
  1. Fussy cut the decanter and glasses out
  2. Stamp the sentiment in Tuxedo Black Memento Ink Pad on the Whisper White piece. Trim one end on an angle
  3. Adhere the World of Good Designer Series Paper to the Early Espresso mat
  4. Thread the buckle onto the Early Espresso Faux Suede Ribbon and affix the ribbon to the card
  5. Adhere this piece to the card base with Stampin’ Seal
  6. Slip the embossed stitched circle under the ribbon and adhere with Multipurpose Liquid Glue
  7. Using dimensionals, adhere the brass “platter so that it straddles the ribbon
  8. Adhere the decanter and one glass using Stampin’ Seal on the “platter”
  9. Use dimensionals for the remaining glass
  10. Affix the sentiment under the raised glass with a glue dot and a dimensional at the other end of sentiment

For Further Info:

Hope you like my Whiskey Business Card!

My Colouring Notes from my presentation:
https://stampwithlaurie.com/wp-content/uploads/2020/08/Stampin-Up-Blends-2020.pdf

Part 1: Whiskey Business Card using Blending Different Colours Technique
Video Tutorial: Blending Different Colours Together

Part 2: Country Harvest Card using Light to Dark Technique
Video Tutorial: Light to Dark/Dark to Light 

Part 3: Beautiful Poppy Birthday Card using Smooth Colouring Technique
Video Tutorial: Smooth Colouring

Part 4: Let’s Gather Together Card using Tip to Tip Blending Technique
Video Tutorial: Tip to Tip Colouring

Part 5: So Grateful Cardinal Card using Flicking Colouring Technique
Video Tutorial: Flicking Colouring

Part 6: Let’s Celebrate You Card using Flicking of Different Colours Technique
Video Tutorial: Flicking of Different Colours Technique

You will find the items listed above in my online store.