My Beautiful Poppy Birthday Card

My Poppy Birthday Card
My Beautiful Poppy Birthday Card

For Technique Tuesday, I am sharing my smooth colouring technique for my beautiful Poppy Birthday Card using the Painted Poppies Bundle. I used both this bundle and the Poppy Moment Dies for this stunning card. They compliment each other so well! Of course, I had to use Poppy Parade Stampin’ Blends to colour my poppies! I wanted to make the colouring the main focal point, but couldn’t resist using the Subtle 3D Embossing Folder on the Whisper White card stock once I stamped the Just Jade splotches. To add a bit of subtle dimension, I used Vellum for some of the leaves and the circular accent that grounds the piece. The Basic Rhinestones were coloured with the Dark Poppy Parade Stampin’ Blend to match my card.

For part 3 of my colouring videos with Stampin’ Blends, I am demonstrating the smooth colouring technique. The other 2 parts are listed below at the end of this document. One of the most exciting things about Blends, as the name suggests, is their blending capabilities. 

Smooth Colouring Technique

  • Apply a smooth layer in small circles of the lightest colour to your image. If you have a large area to cover, work in sections to keep the ink moist. This wet ink will help with the blending.
  • Add the dark colour where the shadows will be using a flicking motion to help with the blending process and reduce the amount of ink needed for a smooth blend.
  • Use the light colour to blend along the area where the dark and the light colours meet
  • You may need to go over it a few times to get it blended how you like.
  • Blends have the ability to lay down smooth, even colour without streaks
  • Colour in small circles keeping the leading edge wet and allow the ink to blend to create a seamless look
  • Make sure you saturate the entire area so that you eliminate any light or mottled areas
  • Check the back of your paper to make sure that the ink is saturating evenly
My Poppy Birthday Card Colouring Tutorial

Supplies:

Stamps: Painted Poppies Bundle (153827)

Inks: Tuxedo Black Memento Ink Pad (132708), Just Jade Classic Stampin’ Pad (153115)

Paper: Basic Black (121045), Whisper White (100730), Poppy Parade (119793), Vellum (101856)

Accessories: Poppy Moments Dies (151594), Subtle 3D Embossing Folder (151775 ), Rhinestone Basic Jewels (144220), Poppy Parade Stampin’ Blends Combo Pack (154958), Just Jade Stampin’ Blends Combo Pack (153107), Stampin’ Blends Color Lifter (144608 ), Paper Snips (103579), Bone Folder (102300), Mini Glue Dots (103683), Stampin’ Seal (152813), Stampin’ Dimensionals (104430)

Measurements: 

  • Basic Black: 8 ½” x 5 ½”; scored at 4 ¼”
    • Scraps for scallop die
  • Whisper White: 4” x 5 ¼”
    • 1 ½” x 2 ¾” (sentiment)
    • 2 pieces: 2” x 2” (for poppies)
    • Scraps for 3 leaves
  • Poppy Parade: 2 ¼” x 1 ½”
  • Vellum: 3” x 3” (circular accent)
    • Scraps for 3 leaves
Close Up of My Beautiful Poppy Birthday Card
Close Up of My Beautiful Poppy Birthday Card

Instructions for My Poppy Birthday Card: 

  1. Fold the Basic Black card stock in half to create the card base.
  2. Stamp the poppies and leaves in Tuxedo Black Memento Ink on Whisper White
  3. Colour the poppies and leaves with the Stampin’ Blends listed above using the video for reference when colouring the poppies
  4. Die cut the poppies and leaves with the corresponding dies from the Painted Labels Dies
  5. Using the Poppy Moments Dies, die cut the poppy outline in Poppy Parade
  6. Die cut a scrap of Basic Black card stock with the scallop border dies from the Painted Labels Dies
  7. Die cut a scrap of Vellum with the small leaves with the stem from the Poppy Moments Dies
  8. Using the Painted Labels Dies, die cut the circular accent in Vellum
  9. Stamp the sentiment in Tuxedo Black Memento Ink on Whisper White and die cut it out with the appropriate Painted Labels Dies
  10. Stamp the splotch in Just Jade in the bottom half of the Whisper White piece
  11. Emboss this piece with the Subtle Embossing Folder and adhere to the card base
  12. Using glue dots, adhere the Vellum circle to the card base
  13. Adhere the Basic Black scallop border to the sentiment and attach to the card base with dimensionals
  14. Using glue dots, adhere the Basic Black poppy center to the poppy frame and adhere to the Vellum circle with glue dots.
  15. Slip one of the poppies behind the sentiment and adhere with glue dots
  16. Adhere with glue dots, the leaves to the other poppy and place on card base with dimensionals
  17. Colour the Basic Rhinestones with the Dark Poppy Parade Stampin’ Blend and add to the card

For Further Info:

Hope you like my Poppy Birthday Card!

My Colouring Notes from my presentation:
https://stampwithlaurie.com/wp-content/uploads/2020/08/Stampin-Up-Blends-2020.pdf

Part 1: Whiskey Business Card using Blending Different Colours Technique
Video Tutorial: Blending Different Colours Together

Part 2: Country Harvest Card using Light to Dark Technique
Video Tutorial: Light to Dark/Dark to Light

Part 3: Beautiful Poppy Birthday Card using Smooth Colouring Technique
Video Tutorial: Smooth Colouring

Part 4: Let’s Gather Together Card using Tip to Tip Blending Technique
Video Tutorial: Tip to Tip Colouring

Part 5So Grateful Cardinal Card using Flicking Colouring Technique
Video Tutorial: Flicking Colouring

Part 6: Let’s Celebrate You Card using Flicking of Different Colours Technique
Video Tutorial: Flicking of Different Colours Technique

You will find the items listed above in my online store.

Clubhouse Birthday Card

My Clubhouse Birthday Card
My Clubhouse Birthday Card

Thought I would share with you my Clubhouse Birthday Card. The Clubhouse Bundle is perfect to create those hard to make masculine cards, especially for that golfer in your life! The demonstrator group I belong to are doing weekly sketch challenges to keep us busy during this crazy time. I thought to switch things up, I would create a masculine card even though the sketch (see below) had a flower image. That’s one thing I love about sketches! They give you inspiration and you can interpret it however you would like. Let’s get started.

Sketch for My Clubhouse Birthday Card
Sketch for My Clubhouse Birthday Card

Supplies:

Stamps:  Clubhouse Cling Stamp Set (151583)

Inks: Night Of Navy Classic Stampin’ Pad (147110), Tuxedo Black Memento Ink Pad (132708), Crumb Cake Classic Stampin’ Pad (147116)

Paper: Crumb Cake (120953), Garden Green (102584), Whisper White (100730), Country Club Designer Series Paper (151314)

Accessories: Golf Club Dies (151580), Absolutely Argyle 3D Embossing Folder (151590), Stitched Shapes Dies (152323 ), Country Club Elements (151315), Night Of Navy Stampin’ Blends Markers Combo Pack (144040), Ivory Stampin’ Blends Marker (144606), Daffodil Delight Stampin’ Blends Markers Combo Pack (144603), Smoky Slate Stampin’ Blends Markers Combo Pack (145058), Stamping Sponges (141337), Paper Snips (103579), Bone Folder (102300), Mini Glue Dots (103683), SNAIL Adhesive (104332), Multipurpose Liquid Glue (110755), Stampin’ Dimensionals (104430)

Measurements: 

  • Crumb Cake: 8 ½” x 5 ½”; scored at 4 ¼” and scrap for golf clubs
  • Garden Green: 4” x 2 ½”
  • Whisper White: 2 ½” x 1 ½” and scrap for golf ball
  • Country Club Designer Series Paper: 2 pieces at 4 ¼” x 1 ½” and scraps for the banner, the golfer’s shirt and 3 golf balls

Instructions: 

  1. Fold the Crumb Cake card stock in half to create the card base.
  2. Emboss the Garden Green card stock with the Absolutely Argyle 3D Embossing Folder.
  3. Stamp in Night Of Navy the sentiment on the wooden banner from the Country Club Elements.
  4. Stamp the golfer in Tuxedo Black Memento Ink on the Whisper White card stock.
  5. Colour the golfer with the Blends markers.
  6. Stamp the golfer’s shirt in Memento on a scrap of the Country Club Designer Series Paper. Fussy cut it out.
  7. Next, die cut the golfer with the third largest oval in the Stitched Shapes Dies.
  8. Using the 3 golf balls die from the Golf Club Dies, carefully line up and die cut the golf balls from the DSP.
  9. Using the larger banner from the Golf Club Dies, die cut a scrap piece of DSP.
  10. Die cut the golf ball from the Golf Club Dies with the Whisper White card stock.
  11. Sponge Crumb Cake ink around the edges of the golf ball.
  12. Die cut two golf clubs from a scrap of Crumb Cake.
  13. Using Multipurpose Liquid Glue, adhere the DSP shirt to the golfer.
  14. Adhere the embossed Garden Green piece to the card base with SNAIL.
  15. Adhere the strips of DSP by staggering them to the card base with SNAIL.
  16. Next, using dimensionals, adhere the golfer.
  17. Using glue dots adhere the golf clubs to the back of the golf ball.
  18. Using Multipurpose Liquid Glue, adhere the banner to the wood element and attached this to the golf ball.
  19. Place a dimensional on the right side of the golf ball and Multipurpose Liquid Glue on the left side. Overlap this with the golfer piece.
  20. Using glue dots adhere three golf balls above the DSP.

For Further Info:

Hope you like my Clubhouse Birthday Card!

A Stampin’ Up! video on the Country Club Designer Series Paper:
https://www.youtube.com/watch?time_continue=9&v=gLcSHhVyj1M&feature=emb_logo

You will find the items listed above in my online store at: https://www.stampinup.com/ecweb/products/101024/country-club?dbwsdemoid=2103981.

Floral Happy Birthday Card

My Floral Happy Birthday Card
My Floral Happy Birthday Card

Wouldn’t you love to receive this pretty Floral Happy Birthday Card in the mail! By changing the sentiment, it would even be a perfect Mother’s Day card! I love the subtle colours of Highland Heather, Pear Pizzazz and Rococo Rose that I picked. The Layered with Kindness Stamp Set is s a Distinktive stamp set; it has a special texture that gives added depth and dimension in a single step, creating photo-realistic images. And the matching punches of Label Me Fancy and Label Me Lovely allow you to layer the sentiment! The Country Floral 3D Embossing Folder continues the floral theme to create a whole bouquet! Let’s get started!

My Floral Happy Birthday Card Upclose
My Floral Happy Birthday Card Upclose

Supplies:

Stamps:  Layered With Kindness Cling Stamp Set (151655)

Inks: Rococo Rose Classic Stampin’ Pad (150080), Pear Pizzazz Classic Stampin’ Pad (147104), Highland Heather Classic Stampin’ Pad (147103), Versamark Pad (102283)

Paper: Thick Whisper White (140272), Highland Heather (146986), Whisper White (100730), Pear Pizzazz (131201)

Accessories: Label Me Lovely Punch (151296), Label Me Fancy Punch (151297), Country Floral 3D Embossing Folder (151823), Stitched So Sweetly Dies (151690 ), White Stampin’ Emboss Powder (109132), Embossing Buddy (103083), Heat Tool (129053 ), 2019-2021 In Color Faceted Dots (149607), Stampin’ Dimensionals (104430), Bone Folder (102300), SNAIL Adhesive (104332), Multipurpose Liquid Glue (110755)

Measurements: 

  • Thick Whisper White: 8 ½” x 5 ½”; scored at 4 ¼”
  • Highland Heather: 5 ¼” x 4”
  • Whisper White: 4 ¼” x 3 ¼ “ and 2” x 1 ¼”
  • Pear Pizzazz: 2 ½” x 2 ½” 

Instructions: 

  1. Fold the Whisper White Thick card stock in half to create the card base.
  2. Stamp the leaves in opposite corners of the larger piece of Whisper White card stock in Pear Pizzazz twice before reinking.
  3.  Stamp the flower in Rococo Rose multiple times amongst the leaves
  4. Using the smaller flower, stamp it in Highland Heather to fill in the space around the leaves.
  5. Die cut this stamped piece of Whisper White with the largest scallop die from the Stitched So Sweetly Dies.
  6. Using Rococo Rose, stamp the sentiment on the smaller Whisper White card stock.
  7. Punch this stamped piece out with the Label Me Fancy Punch discarding the frame part.
  8. Rub the Embossing Buddy on the Pear Pizzazz card stock.
  9. Stamp the sentiment in Versamark and sprinkle White Embossing Power on it.
  10. Heat set the sentiment with the Heat Tool.
  11. Punch this Stamped piece out with the Label Me Lovely Punch.
  12. Emboss the Highland Heather card stock with the Country Floral 3D Embossing Folder.
  13. Adhere this embossed piece to the Thick Whisper White card base with Multipurpose Liquid Glue.
  14. Using dimensionals, adhere the floral Whisper White piece to the Highland Heather.
  15. Centre the Pear Pizzazz sentiment in the centre of the Whisper White with dimensionals.
  16. Add the Happy Birthday sentiment to the Pear Pizzazz card stock with dimensionals.
  17. Three Rococo Rose Faceted Dots add a touch of fun dimensions to the card.

For Further Info:

Hope you like my Floral Happy Birthday Card!

You will find the items listed above in my online store at:
https://www.stampinup.com/ecweb/default.aspx?dbwsdemoid=2103981

My Painted Poppies Birthday Card

My Painted Poppies Birthday Card
My Painted Poppies Birthday Card

One thing I love about going to Stampin’ Up! Events is that you get to play with new products! My Painted Poppies Birthday Card is one of the cards that we made at OnStage in November. Love the new Peaceful Poppies Suite! For this card I even coloured the Whisper White Crinkled Seam Binding Ribbon with a Dark Old Olive Blend to match my project! The Designer Series Paper is gorgeous and features handpainted blooms and watercolor washes that make beautiful backgrounds or focal points for cards, scrapbook pages, and other paper crafts. Patterns include floral prints, stripes, polka dots, and more.

Supplies:

Stamps:  Peaceful Moments Cling Stamp Set (151595), Painted Poppies Cling Stamp Set (151599)

Inks: Poppy Parade Classic Stampin’ Pad (147050), Tuxedo Black Memento Ink Pad (132708)

Paper: Poppy Parade (119793), Whisper White (100730), Peaceful Poppies Designer Series Paper (151324)

Accessories: Whisper White 1/4″ (6.4 Mm) Crinkled Seam Binding Ribbon (151326), Old Olive Dark Stampin’ Blends Marker (144573), Bone Folder (102300), Paper Snips (103579 ), SNAIL Adhesive (104332), Stampin’ Dimensionals (104430

Measurements: 

  • Poppy Parade: 8 ½” x 5 ½”; scored at 4 ¼”
  • Peaceful Poppies Designer Series Paper: 2 ¼” x 3 ¾” and 2” x 3 ½”
  • Whisper White: 1 ½” x 3”
  • Whisper White Crinkled Seam Binding Ribbon: 10”

Instructions:

  1. Fold the Poppy Parade card stock in half to create the card base
  2. Stamp in Poppy Parade randomly the larger poppy and leaf from the Painted Poppies Stamp Set on the front of the card base.
  3. Stamp the sentiment in Tuxedo Black Memento Ink on the piece of Whisper White towards the bottom leaving enough room to rip the bottom edge of the card stock.
  4. Next, adhere towards the top of the card front the larger piece of DSP with adhesive.
  5. Adhere the other piece of DSP on top of the other piece with adhesive, but at a slight angle.
  6. Using the Dark Old Olive Blend, colour the Whisper White Crinkled Seam Binding Ribbon.
  7. Once dry, wrap the ribbon around the sentiment piece twice and tie in a bow.
  8. Using dimensionals, adhere the sentiment piece to the card front.

For Further Info:

Hope you like my Painted Poppies Birthday Card!

You will find the items listed above in my online store at:
https://www.stampinup.com/ecweb/default.aspx?dbwsdemoid=2103981