Interactive Card - Stamp With Laurie

Crackin’ Holidays Panel Card

November 13, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here! I am sharing my Crackin’ Holidays Panel Card as my Design Team Inspiration Card for Conie Fong Art & Design using the New Release Christmas Nutcracker Ensemble Bundle. This purchase includes 4 Images:

Image 1: Christmas Nutcracker Ensemble, PNG format
Image 2. Nutcracker Drummer, PNG format
Image 3. Nutcracker King, PNG format
Image 4. Nutcracker Soldier, PNG format

The Details of My Crackin’ Holidays Panel Card

For my card, I wanted to create a Nutcracker Ballet themed panel card that when closed, you see just the Soldier and Drummer and then you open it to see the King. So, I used the individual nutcrackers in the stamp set and coloured them in traditional colours with my Copic markers.

Front of Card with Soldier and Drummer Nutcrackers

For the panel card base, I used a premade card blank from Hunkydory, but you could easily create one yourself. I used a pencil and traced the edges of the card base onto the music DSP and then used my Paper Snips to cut it out. The music DSP was perfect to represent the March of the Nutcrackers music from The Nutcracker Ballet. Next, I brushed Vintage Photo onto the DSP. This was two-fold…one to cover where my cutting was not perfect and the other to add a finished edge to the base.

To highlight the nutcrackers in each of their panels, I layered each with a plaid piece of DSP that matched my colouring and a Real Red mat that I die cut out with the Mini Slimline Stackables from Lawn Fawn. For the smaller panels, I used nutcracker DSP with Real Red mats and a pair of glimmery ballet slippers to match my theme.

For embellishments, I added some distressed gold die cut garlands and ribbons at the top of each nutcracker panel. I also added some red rhinestones to add some sparkle, in addition, to the Clear Wink of Stella on all the gold trim of the nutcrackers.

To keep my card closed, I created a 1 ½” belly band of DSP and Real Red card stock with an ornament sticker from my stash.

————————–

Copic Markers:

Soldier Nutcracker
Skin: E000/E00/E21/E11/E04
Hair: E18/E15/YR23/Y21
Cheeks: R21/R20
Reds: R59/R29/R27/R24
Greens: G99/YG67/YG63/YG61
Blues: B37/B14/B12
Golds: YR24/YR23/Y21
Blacks: C9/C6/C4
Sword: C4/C3/C1/YR24/YR23/Y21

King Nutcracker
Skin: E000/E00/E21/E11/E04
Hair: C9/C6/C4
Cheeks: R21/R20
Reds: R59/R29/R27/R24
Greens: G99/YG67/YG63/YG61
Blues: B37/B14/B12
Blacks: C9/C6/C4
Golds: YG24/YG23/Y21

Drummer Nutcracker
Skin: E000/E00/E21/E11/E04
Hair: E37/E35/E33
Cheeks: R21/R20
Reds: R59/R29/R27/R24
Greens: G99/YG67/YG63/YG61
Blues: B37/B14/B12
Blacks: C9/C6/C4
Golds: YR24/YR23/Y21

————————–

Card Recipe for My Crackin’ Holidays Panel Card:

Christmas Nutcracker Ensemble Bundle, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Eastern Wishes Screen Shaped Card Blanks, Hunkydory Crafts
Christmas Around the World 12” x 12” Designer Series Paper, Stampin’ Up!
This Christmas Specialty 12” x 12” Designer Series Paper, Stampin’ Up!
Sparkle Glimmer Paper, Stampin’ Up!
Distressed Gold 12” x 12” Specialty Paper, Stampin’ Up!
Large Mini Slimline Stackables Dies, Lawn Fawn
Small Mini Slimline Stackables Dies, Lawn Fawn
Christmas Classics Dies, Stampin’ Up!
Little Happiness Ballet Shoes, Joy Crafts
Vintage Photo Ink Pad, Ranger
Blending Brushes, Stampin’ Up!
Versafine Onyx Black Ink Pad, Tsukineko
Crackin’ Holiday Stamp Set, Krafton’ Kimmie Stamps
Real Red & Garden Green Ribbon Combo Pack, Stampin’ Up!
Red Rhinestone Basic Jewels, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!
Ornament Sticker, From my Stash
Paper Snips, Stampin’ Up!

Real Red Card Stock, Stampin’ Up!

Finished card size: 4-¼” x 6-1/8”

My Card in Action

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using
Christmas Nutcracker Ensemble Bundle for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

It’s Showtime Birthday Card

November 2, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here to share my It’s Showtime Birthday Card using the Showtime Stamp Set by Kindred Stamps! It was my Hubby’s birthday this past weekend and this is the fun pop-up card that I made him!

The Details of My It’s Showtime Birthday Card

My hubby and I both grew up watching the Muppets and when I saw this stamp set, I knew he would get a kick out of it, especially the grumpy old men! They were always his favourite!

For my card, I decided to create a stage on the front with the Cast & Crew wishing him a Happy Birthday and then a fun pop up of the theatre box on the inside.

But first, I coloured all the characters with my Copic markers and cut them out. Once that was done, I built my stage. Since I didn’t have curtain dies, I used the Platform Pop-Up Hillside Inserts Dies to create one. They fit together perfectly for my curtains! I added a floor to the stage with some wood grain DSP.

The text for the word bubbles was created on my computer, printed out and die cut with the Conversations Bubbles dies.

Inside of Card show Theatre Pop-up Box — Inside of Card showing Theatre Pop-up Box

For the inside of my card, I used the Platform Pop-Up and Add-On dies to create my theatre box that the grumpy old men sit in it on the show. I had to trim their legs off to make them fit. Lol! I couldn’t resist adding Animal to the inside as well since he is another favourite of my Hubby, and I can see him climbing the box with his crazy antics! Lol!

Since the card was so bulky already, the only embellishments I added were a scattering of gold sequins.

————————–

Copic Markers:

Kermie
Skin: YG17/YG13/YG03/YG01
Mouth: R27/R24/R22
Tongue: R22/C6/C4
Eyes: C3/C1/0

Close Up of the Frog — Close Up of Kermit the Frog

Fozzie Bear
Fur: R08/YR68/Y38/YR31
Mouth: R27/R24/R22
Nose: R27
Eyebrows: E37
Hat: E37/E35/E34
Tie: C3/C1/0/R22

Close Up of the Bear — Close Up of Fozzie Bear

Miss Piggy
Skin: R20/R11/R000
Hair: E25/YR24/Y26/Y21
Dress/Shoes: R85/R83/R81
Belt: C6/C4/C3
Gloves/Pearls: C3/C1/0

Close Up of Pig — Close Up of Miss Piggy

Dr. Bunsen Honeydew
Skin: YG13/YG03/YG01
Medical Coat/Shirt: C3/C1/0
Pants: E39/E37/E35
Vest: YG97/YG93
Shoes: C6/C4
Tie: R22

Close Up of Doctor — Close Up of Dr. Bunsen Honeydew

Swedish Chef
Skin: E04/E11/E21/E00/E000
Hair: E37/E35/E34
Apron: C3/C1/0
Shirt/Pants: B39/B37/B34
Tie: R27/R24/R22
Shoes: E37/E34

Close Up of Chef — Close Up of Swedish Chef

Beaker
Skin: R20/R11/R000
Hair: E18/E08/YR18/YR14
Mouth: R22
Nose: E18/E08/YR18
Medical Coat: E43/E41/E40
Shirt/Shoes: C3/C1
Tie: YG97

Close Up of Medical Lab Assistant — Close Up of Beaker

Waldorf
Skin: E04/E11/E21/E00/E000
Hair/Shirt: C3/C1
Suit: E39/E37/E35/E34
Tie: R27/R24

Statler
Skin: E04/E11/E21/E00/E000
Hair/Shirt: C3/C1/0
Suit: B39/B37/B34
Tie: B34

Animal
Fur: E18/E08/YR18/YR14
Eyebrows: C9/C6/C4
Mouth/Tongue: R29/R22/C6/C4/YR24
Nose: R27/R24/R22
Shirt: E43/E25
Jacket: R27/R24/R22/YR24
Pants: B37/B34

Close Up of two old men in theatre box with another muppet climbing the box. — Close Up of Waldorf, Statler and Animal

————————–

Card Recipe for My It’s Showtime Birthday Card:

Showtime Stamp Set, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Platform Pop-Up Dies, Lawn Fawn
Add-On Platform Pop-Up Dies, Lawn Fawn
Hillside Inserts Platform Pop-Up Dies, Lawn Fawn
Conversations Bubbles Dies, Stampin’ Up!
Wood Textures Designer Series Paper, Stampin’ Up!
Guy Greetings Stamp Set, Stampin’ Up!
Tuxedo Black Memento Ink, Stampin’ Up!
Neutrals Adhesive-Backed Sequins, Stampin’ Up!
Paper Snips, Stampin’ Up!
Basic Black and Real Red, Card Stock Stampin’ Up!

Finished card size: 5 ½” x 5 ½”

It’s Showtime Birthday Card in Action

————————–

For more of my Copic cards, please click here.

Hope you like My Showtime Birthday Card using the
Showtime Stamp Set by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

Paint It Black Card

October 19, 2023 Leave a comment

Hello Crafty Friends! It’s Laurie here! I am sharing my Paint It Black Card using Wednesday from The Girl by C.C. Designs. This fun box card is perfect for Halloween with its gothic feel!

The Details of My Card

I love the new Wednesday TV series and when I saw these stamps by C.C. Designs, I couldn’t resist getting them to colour! Since Wednesday is always in black, I pulled out my Cool Copic markers to colour her up. To make her eyes pop, I used a matt black gelly roll pen on them. Thing is on the same stamp, but it was an easy snip with my paper snips to separate him so that I could place him with his lit match facing Wednesday.

For my card, I wanted to recreate the scene where Wednesday is playing her cello on her balcony. So, I decided that a box card would be fun! I found online a digital stamp of the window that I printed at 2 7/8” from my computer and die cut with a 3” circle die. Since, my box card had multiple layers, I added the window to the back layer, Wednesday to the middle layer and Thing to the front layer to create lots of dimension.

For the balcony, I embossed black card stock with a brick embossing folder and then rubbed Firebird wax on the bricks to make them pop and give them a red tint. The top filigree was a gate die that I repurposed to just use the top part of the die cut to give my balcony a gothic feel. The banister railing was also another die that I repurposed to add to the gothic as well. For both die cuts, I rubbed Brushed Iron Wax on to make them look ancient.

Next, I white embossed the sentiment from the BFF Stamp Set and die cut it out with a retired Stampin’ Up! die. Love this fun sentiment that Gomez calls Wednesday in the series! Finally, I added some black rhinestones to add a subtle sparkle to my card.

————————–

Copic Markers

Wednesday
Skin: E04/E11/E21/E00/E000
Hair: C9/C7/C4/C3
Outfit: C9/C7/C4
Shoes: C9/C7/C4
Cello: C9/C7/C4

Close Up of the girl — Close Up of Wednesday and Thing

Thing
Skin: E04/E11/E21/E00/E000
Fire: YR18/YR14/Y38

————————–

Card Recipe for My Paint It Black Card

The Girl, C.C. Designs
The BBF, C.C. Designs
Ophelia Hall Window, Wednesday Addams, The Cuts Workshop
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Tim Holtz Mini Brickwork 3-D Textures Fades Mini Embossing Folder, Sizzix
Gate Die 6002/0578, Joy Crafts
Lace Border 6002/1289, Joy Crafts
3” Circle Basics Set Die, Memory Box
Firebird Metallique Wax, Art Alchemy
Brushed Iron Metallique Wax, Art Alchemy
Matt Black Gelly Roll Pen, Sakura
Black Rhinestone Jewels, Stampin’ Up!
Versamark Ink Pad, Stampin’ Up!
White Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
Black Dimensionals, Stampin’ Up!
Paper Snips

Finished card size: 5” x 4 ½” (Standing Up)
6” x 4 ½” (Flat)

————————–

Award for Top pick — Won Design Team Top Pick – October 2023

To view my other Copic cards, please click here.

I also made another card using The Girl from the The BFF Stamp Set.
Please click on the photo or here, to learn more about this card.

A birthday card with a girl in front of a haunted house — A Monstrous Birthday Card

Hope you like my Paint It Black Card using Wednesday from The Girl by C.C. Designs!

Thank you for stopping by!

Hugs,
Laurie

Our Steampunk Journey Card

September 28, 2023 4 Comments

My Steampunk Journey Card - an anniversary card with gears and love on it — My Steampunk Journey Card

Hello Crafty Friends! Laurie here again! I am sharing Our Steampunk Journey Card using the Stamperia Vagabond Series of paper and die cuts to create my anniversary card for my Hubby.

The Details of Our Steampunk Journey Card

My Hubby is always encouraging me to do what I love and explore mixed media more since I am still a novice. So, I decided to create a fun mixed media front with a steampunk feel for his anniversary card. He loves anything steampunk and I bought the Stamperia papers and all the bits in anticipation of making a card for him.

Angled View of Folds of the card — Angled View of Folds of the Card

For my card, I only used papers and die cuts…no stamping or colouring for me which is a rarity for me! Lol! But, when I saw the Stamperia papers, I knew that I wanted to create a 3-step fun fold card that would keep on going as my hubby opened it…almost like a mini album. I even decorated the back of it and made a custom envelope with the papers.

Fun with Mixed Media

For my mixed media, I sponged black gesso on my chipboards and then rubbed with my fingertips the Brushed Iron and Firebird waxes over the “Love” piece to help differentiate it from the other chipboard pieces. Next, I added some Gilding Flakes to give it some shimmer and brushed more wax where needed to give it a gritty feel. More gears that were rubbed with the Brushed Iron wax were adhered with glossy accents on top of the “Love” piece for dimension.

Mixed Media of gears and word love — Mixed Media

Once that was done, I added a gear frame tag behind the decorated chipboard that consisted of a snippet of paper with a small clock. The gears on this tag were lightly rubbed with the Brushed Iron wax as well. I added a few clear die cuts from Stamperia to represent my theme of a marriage being a journey, albeit a steampunk one! Lol!

Close Up of the gears and word love — Close Up of Mixed Media Focal Point

A monocle with an attached ball bead chain was glued in place with glossy accents. A scattering of red rhinestones added some sparkle and brightness to the front.

Part of Inside of Card — Inside of Card – Part 1

For my backdrop of my focal point, I decided to use a clock since it is the epitome of steampunk! I fussy cut two clocks out from the papers…one for the front and one for the back of the circle since you will see it when the card is opened. I needed a 5 ½” circle to mount these clocks and since I didn’t have a die that big, I pulled out my retired circle cutter from Stampin’ Up! It was what they used before they had dies!

Another Part of Inside of Card — Inside of Card – Part 2

Inside Our Steampunk Journey Card

For the inside of my card, I used several steampunk dies cuts and brushed the Brushed Iron wax on them to bring out the details. I even brushed it on the black edges of all the folds and card base. Of course, I used lots of die cut gears again with a stylized steampunk key, watch and wings! A few clear die cuts from Stamperia were added inside to continue my theme of a journey.

Since the back was so long, I used two different papers and pieced them together to create a continual scene of a pilot in flight on one side and flight gear on the other.

Full Back of Card with pilot and flight gear — Full Back of Card Laid Flat

————————–

Card Recipe for Our Steampunk Journey Card:

12” x 12” Paper, Sir Vagabond Aviator, Stamperia
6” x 6” Paper, Sir Vagabond Aviator, Stamperia
Sir Vagabond Aviator Collectables, Stamperia
Steampunk Greyboard Cuts and Scraps, Stamperia
Sir Vagabond Aviator Clear Die Cuts, Stamperia
Black Gesso, Deco Arts Americana
Makeup Sponges
Verdigris Gilding Flakes, Cosmic Shimmer
Art Alchemy-Metallique Wax – Brushed Iron, Prima Marketing
Art Alchemy-Metallique Wax – Firebird, Prima Marketing
Industrial Chic – Frame & Tag Dies, Sue Wilson, Creative Expressions
Industrial Chic – Mixed Essentials Dies, Sue Wilson, Creative Expressions
Garage Gear Thinlits Dies, Stampin’ Up!
Monocles, Idea-ology, Tim Holtz
6” Ball Bead Chain with Connector Clasp, Local Hardware Store
Red Rhinestone Jewels, Stampin’ Up!
Black Ribbon, From my Stash
Floral Romance Seal, Stampin’ Up!
Silicon Craft Mat, Stampin’ Up!
Glossy Accents, Ranger
Circle Cutter, Stampin’ Up!
Paper Snips, Stampin’ Up!
Liquid Glue, Stampin’ Up!

Basic Black and Very Vanilla Card Stock, Stampin’ Up!

Finished card size: 6” x 6”

Our Steampunk Journey Card in Action

A Pictorial of the Card — Different Views of the Card

————————–

To view my other mixed media piece, please click here.

To view my other steampunk cards, please click here.

Hope you like Our Steampunk Journey Card using the Stamperia Vagabond Series!

Thank you for stopping by!

Hugs,
Laurie

Grouchy Kitty Birthday Card

August 15, 2023 2 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing my Grouchy Kitty Birthday Card using the Grouchy Pets Clear Stamp Set and matching dies by CC Designs. It was my sister-in-law’s birthday recently and I thought she would find this kind of snarky card funny!

The Details of My Card

For my Grouchy Kitty Birthday Card, I knew that I wanted to use the grouchy cats from CC Designs since I thought my SIL (sister-in-law) would get a kick out of them! Plus, I found the perfect poem online that I typed out on my computer and printed off. If you watch Sheldon the TV series, you will get the reference. I knew that my SIL would get a laugh out of it!

A poem about a grouch cat — Grouchy Kitty Poem

My SIL has a brown tabby cat. So, I coloured with my Copic markers one of the cats to look like it. For variation, I made another black and the third an orange tabby. For the tabby cats, I used a Copic multi liner to create their stripes in a triangle scribble shape.

Next, I pulled out my Small Slimline with Lift the Flaps Dies by Lawn Fawn. I love this interactive die set! So fun! I thought it would be neat to have one cat on the front holding a balloon. Don’t you just love the face on this cat! Like he is so put out that he must hold a balloon! Lol!

When the flaps are open, you see the other cats and the grouchy kitty poem. I used my paper snips to cut down the cats to fit and added a party hat sticker to each of the cats. Again, the faces of those cats are so priceless especially since they must wear party hats! I can definitely see a cat making that face! Lol!

All Three Panels Open showing two cats with party hats and the grouchy kitty poem — All Three Panels Open

I added a few present stickers to dress up the poem panel. On the front of the card, I added some paw gems and red rhinestones for embellishments.

————————–

Copic Markers:

Black Cat
Fur: C7/C6/C4
Tummy: C3/C1/0
Ears: R22/R20
Eyes: G99/G94/C3/C1/0

Brown Tabby Cat
Fur: E47/E44/E43/E42/E41
Stripes: 0.3 Multi Liner Black, Copic
Ears: R22/R20
Eyes: C3/C1/0

Orange Tabby Cat
Fur: YR18/YR14/YR12/Y17
Stripes: 0.3 Multi Liner Sepia, Copic
Ears: R22/R20
Eyes: C3/C1/0

————————–

Card Recipe for My Grouchy Kitty Birthday Card:

Grouchy Pets Clear Stamp Set, CC Designs
Grouchy Pets Outline Die, CC Designs
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Biggest Wish Stamp Set, Stampin’ Up!
VersaMark Ink, Stampin’ Up!
White Embossing Powder, Stampin’ Up!
Heat Tool, Stampin’ Up!
Playful Pets Designer Series Paper, Stampin’ Up!
Small Slimline with Lift the Flaps Dies, Lawn Fawn
Stylish Shaped Dies, Stampin’ Up!
Fun Balloons Stickers, Autumn Leaves
Multi Size Presents Stickers, Jolee’s Boutique
Party Hat Stickers, Crafts, Dollarama
Paw Adhesive Gems, The Paper Studio
Red Rhinestone Jewels, Stampin’ Up!
0.3 Multi Liner Sepia, Copic
0.3 Multi Liner Black, Copic
Paper Snips, Stampin’ Up!
Computer to print sentiment

Real Red, Soft Suede and Thick Basic White Card Stock, Stampin’ Up!

Finished card size: 8 ½” x 3 ½”

————————–

To view my other Copic cards, please click here.

Hope you like my card using Grouchy Pets Clear Stamp Set by CC Designs!

Thank you for stopping by!

Hugs,
Laurie

My Sliding Santa Card

July 28, 2023 2 Comments

Hello Crafty Friends! It’s Laurie here! I am sharing My Sliding Santa Card for Christmas in July and as my Design Team Inspiration Card for Paper Nest Dolls using the Vacation Santa Set. There are 7 stamps, which include Surfer Santa, Ice-cream Santa, Santa with Reindeer Floatie, Santa & Mrs. Claus, Palm Tree and Flamingo & Gifts, that come in both rubber and digital stamps. I made a card with Ice-cream Santa from this set as well and will include a link to it at the end of this post.

The Details of My Card

For my card, I decided to create fun interactive slider card using Santa with Reindeer Floatie. I had so much fun colouring this cutie with my Copic markers! In fact, I coloured two of him and will use the second version on another card. I added some white Gelly Roll Pen to his floatie and Rudolph’s nose to give them a shine.

Next, I wanted to see the different layers of the papers behind him. So, I used two different slimline die sets. I picked a water-like paper for the slider piece as if he is going down a river twirling around like at one of those amusement parks. Lol! I kept the cut-out piece from the slider die and glued it through the hole onto the layer below it so that you couldn’t see the orange layer below. This added to my pool like feel.

I used some slider discs to create my slider, but in the past, I have also used pennies. I made sure that my dimensionals were round so that I could get him spinning around. There is a good video by Taylored Expressions on making a slider card using their discs. I followed it to create my slider part. I will add a link at the end of this post.

My Sliding Santa Card in Action

I decorated my card using some Christmas Chit Chat pieces. I popped up the sentiment ones making sure that my Santa would not get caught on them. A couple of matching glitter dots were added to add some sparkle.

————————–

Copic Markers

Skin: E15/E13/E11/E00/E000
Beard: C3/C1/C0
Reds: R29/R27/R24/R22
Greens: YG67/YG63/YG03
Reindeer: E35/E33/E31/E30/E31/E53/E51/E50/R29/R27/R24
Coconut Drink: R85/R83/R81/C3/C1/0/E33/E31/E30/E53/E51/E50

Close Up of Santa on the floatie — Close Up of Santa on reindeer Floatie

————————–

Card Recipe for My Sliding Santa Card

Vacation Santa Set, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Beach Party 12” x 12” Paper Pad, Carta Bella
Christmas Magic Chit Chat, Doodlebug Design Inc.
Small Slimline with Lift Flaps Dies, Lawn Fawn
Large Slimline with Slider Dies, Lawn Fawn
On the Right Track Discs, Taylored Expressions
Glitter Enamel Dots, Stampin’ Up!
White Gelly Roll Pen, Sakura
Pop-Dot Adhesives, Forever in Time
Granny Apple Green Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 3 ½”

Stamp Size: 3”

————————–

For More Information On My Sliding Santa Card

To view my other Paper Nest Dolls cards, please click here.

Link to Taylored Expressions Slider card: https://www.youtube.com/watch?v=PeyVQAvFKmc

Hope you like my Design Team Inspiration Card using
Vacation Santa Set by Paper Nest Dolls!

My Santa on Vacation Card

For more information on my card, please click here or on the photo.

A card with Santa on a beach eating ice cream — Santa on Vacation Card

Thank you for stopping by!

Hugs,
Laurie

Tri-Fold Shutter Card

July 21, 2023 Leave a comment

Hello Crafty Friends! Laurie here again! I am sharing my alternative Tri-Fold Shutter Card using the May 2023 Exploring In Color Paper Pumpkin Kit. I made one of these for Father’s Day (I will post it at the end) using the same kit but using a different card. It was a huge hit! So, I thought I would make one as a birthday card for a teenager who loves to camp!

The Details of My Card

For my fun-fold card, I used a full card base front and back from the Paper Pumpkin Kit. Loved that the card bases were printed with a continual scene from front to back! Therefore, with some careful measuring, this made it easy to create my card!

Since the PP card base is 5 ½” tall (same as my card base), I trimmed ¼” off top and bottom to make it fit onto my card base with mats. I didn’t mat the two centre scene strips since they were so thin already. They also have the fold from the PP card base in them, but you really don’t notice it.

Next, the stamped images were from the stamp set that came in the kit. I made the boots look like they were walking. Lol! Since the stamped pieces filled the space so nicely, I didn’t need to mat them.

Finally, the only things that I added to my card was the card base, some In Color card stock and Adhesive-Backed Solid Gems. The linen thread, binoculars and sentiment pieces were all from the kit.

Supplies:

Stamps: May 2023 Exploring In Color Paper Pumpkin Kit, Gone Fishing Stamp Set (For Father’s Day Card) (161535)

Inks: Copper Clay Spot (In Kit)

Paper: Very Vanilla 12” x 12” Cardstock (144239), Copper Clay (161721), Boho Blue (161724), Wild Wheat (161725), Pebbled Path (161722)

Accessories: Adhesive-Backed Solid Gems (161300), Rustic Metallic Adhesive-Backed Dots (For Father’s Day Card) (159082), Linen Thread (In Kit), Bone Folder (102300), Stampin’ Dimensionals (In Kit), Stampin’ Seal (152813), Mini Glue Dots (In Kit)

Measurements:

Very Vanilla:
- 12” x 5 ½” (cut/scored according to template below
Copper Clay: (3 pieces)
- 1 ¾” x 5 ¼” (2 pieces)
- 2” x 3 ½”
Boho Blue:
- 2 ¼” x 1 ¾” (2 pieces)
- 2 ¼” x 3 ¾”
Wild Wheat:
- 1 ¼” x 1 ¾” (2 pieces)
Pebbled Path (3 pieces):
- 1 ¼” x 1 ¾” (2 pieces)
Card Pieces:
- 1” x 5” (2 pieces) (long vertical pieces)
- 1 ¼” x 3 ¾” (2 pieces) (long horizontal pieces)
- 2” x 1 ½” (2 pieces)

More Information on My Tri-Fold Shutter Card

Lastly, here is my Father’s Day Card using the May Exploring In Color Paper Pumpkin Kit. Same measurements as above, but a Basic White card base, different Paper Pumpkin card from the kit and Rustic Metallic Adhesive-Backed Dots. The sentiment is from the Gone Fishing Stamp Set.

Downloadable Tri-Fold Shutter Card Template

To download a PDF of the Tri-Fold Shutter Template, please click here or on the picture.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

You’re Stellar Wobble Card

July 5, 2023 Leave a comment

A card with an Astronaut and planet on it. — You’re Stellar Wobble Card

Hello Crafty Friends! Laurie here again! I am sharing my You’re Stellar Wobble Card using the Stargazing Suite Collection by Stampin’ Up! This Collection includes the Reach for the Stars Stamp Set, Reach for the Stars Dies and Stargazing 12” x 12” Designer Series Paper.

The Details of My Card

My card was for a swap, and I decided to make a fun faux centre-step card to allow enough room for the astronaut and a planet to fit on my centre panel. I used the measurements from my faux centre-step template which I have included at the end of this post.

When I saw this Suite in the Annual Catty, I knew that I wanted to make a wobble card as well! They are so fun and interactive! I bought the Mini Action Wobble on Amazon.ca, but you could easily make your own by using a piece of bendable wire and wrap it around a pencil. Then, secure one end to your wobble piece and the other end to the card base.

Astronaut in Action

Since I made this card for a swap, I needed several planets, but only a couple fit the planet die and the rings die. I really wanted to use the ring die with silver foil paper! I thought it would add some cosmic shimmer along with the die cut stars! So, I fudged it. Tip: if you die cut the larger planets, make sure that the shadow is showing in the centre of the die. This gives it a realistic 3D look.

All Cards with Different Planets — Swap Cards with Different Planets

I decided to stamp my astronaut and sentiment in Basic Gray since there was already a lot of black to my card. Besides, it was a good alternative to colouring the astronaut since I would have used Smoky Slate to colour his shadows and left most of him white anyways. So, this did it for me!

Tip: to figure out where to place glue for the centre panel, I used my grid paper a pencil to mark the section.

The only embellishments were three Classic Matte Dots in each colour tying in my colour scheme. Of course, they had to be in a row showing my Star Trekkie side of me! Lol!

I made another card as well for a friend. This time I added the retired Shimmery Crystal Effects to the astronaut’s helmet. So fun!

Supplies:

Stamps/Bundles/Dies: Stargazing Suite Collection (161189)

Inks: Basic Gray (149165)

Paper: Basic Black (121045), Basic White (159276), Lemon Lime Twist (144245), Silver Foil 12” x 12” Specialty Pack (156457), Stargazing 12” x 12” Designer Series Paper (in Collection)

Accessories: Classic Matte Dots (158146), Multipurpose Liquid Glue (110755), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683), Grid Paper (130148), pencil, Mini Action Wobble (from Amazon.ca)

Multiple cards with astronaut and planet on then — Swap Cards

Measurements:

Basic Black: (2 pieces)
- 8 ½” x 5 ½” cut/scored according to template below
- 8 ½” x 3” cut/scored according to template below
Basic White: (4 pieces)
- Sentiment: 2 ¼” x ½”
- Astronaut: 4” x 2”
- Centre Panel: 4-1/8” x 2-5/8”
- Back Panel: 3-5/8” x 3-1/8”
Lemon Lime Twist
- Scrap
Silver Foil (2 pieces):
- 2 ½” x 1”
- Stars: Scrap
Stargazing 12” x 12” Designer Series Paper (3 pieces):
- Centre Panel: 4” x 2 ½”
- Back Panel: 3” x 5 ¼”
- Planet

More Information on My You’re Stellar Wobble Card

Downloadable Faux Centre-Step Template

To download a PDF of the Faux Centre-Step Template, please click here or on the picture.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

I Detect a Birthday Card

April 25, 2023 2 Comments

A birthday card with detectives and a dog on it. — I Detect a Birthday Card

Hello Crafty Friends! It’s Laurie here to share my I Detect a Birthday Card using the It’s a Mystery Stamp Set by Kraftin’ Kimmie Stamps!

This card was for a 13-year-old boy whose birthday is today! Every year I create an interactive card for him. Last year I created a Pop & Twist card and in the past years, I created a Never-Ending Card, a Slider card, a wobble card and so on. He always says that I make the best cards EVER! Got to love that!

So, this year, I decided to create a Double Flap Flashlight Card for him to investigate the clues to his birthday mystery! So much fun! For my card, I thought the It’s a Mystery Stamp Set and the Master Detective Paper were perfect for my theme!

The Details of My Card

I stamped the images with Jet Black StazOn Ink onto a window sheet. Tip: be careful when stamping the stamp since the ink will be slippery. The stamp may slide if you don’t keep your stamp horizontal as you press. StazOn will not smear once it dries though.

My Card in Action

I used the second largest Stitched Rectangle Die to create a window in Basic Black cardstock and glued the window sheet behind it. A circle punch was used to create an opening for finger access at the base of the window piece. To create the “hidden clues”, I glued Basic Black cardstock to the back of the window piece on three sides leaving the bottom open to create a pocket where the flashlight would go. The black stamped images disappear against the black cardstock! Tip: use really strong adhesive since this is the interactive part.

For my flashlight, I used a circle punch to punch the white flashlight part. The handle was 2 strips of ¾” x 5” Basic Black glue together to make it sturdy. This handle was sandwiched between the white circle and a Basic Black scalloped circle to create the flashlight. I added some glimmer washi tape to make it catch the eye.

The inside of the card was decorated with the Master Detective paper. Graphic 45 made it so easy with the tags! I even used some of the tags to create pull out cards for which the boy can play.

Cards of Sherlock Holmes, Suspect and Moriarty — Cards to solve the Mystery

The only stamping on the inside was the sentiment piece. The only embellishment I used was the magnifying glass charm. Perfect for my card!

Inside of card with sentiment — Inside of Second Flap

————————–

Copic Markers:

Inspector 1
Skin: E000/E00/E21/E11/E04
Browns: E35/E33/E31
Greens: G99/G94/G21
Magnifying Glass: C3/C1/0/Glossy Accents
Black Gelly Roll Pen on magnifying glass, pipe, and hair

Close Up of one of the inspectors — Close Up of Inspector 1

Dog
Fur: E35/E33/E31
Collar: B26
Black: Black Gelly Roll Pen

Close Up of Dog on card — Close Up of Dog

Inspector 2
Skin: E000/E00/E21/E11/E04
Browns: E35/E33/E31
Grays: C6/C4/C2
Shirt: C3/C1/0

Close Up of second inspector — Close Up of Inspector 2

————————–

Card Recipe for My I Detect a Birthday Card:

It’s a Mystery Stamp Set, Kraftin’ Kimmie Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Tuxedo Black Memento Ink, Stampin’ up!
Master Detective 12” x 12” Paper Pad, Graphic 45
Window Sheet, Stampin’ Up!
Jet Black StazOn Ink Pad, Stampin’ Up!
Stitched Rectangle Dies, Stampin’ Up!
Glossy Accents, Ranger
1” Circle Punch, Stampin Up!
1 ¾” Circle Punch, Stampin Up!
2-3/8” Scallop Circle Punch, Stampin Up!
Glitter Washi Tape, Stampin’ Up!
Black Gelly Roll Pen, Sakura
Tear & Tape Adhesive, Stampin’ Up!
Tombow Multipurpose Liquid Glue, Stampin’ Up!
Magnifying glass charms antique silver tone, Nicole de Bruin Charms
Basic Black, Basic White, and Soft Suede Card Stock, Stampin’ Up!

Finished card size: 5” x 6 ½”

————————–

To view my other Copic Marker cards, please click here.

Hope you like my I Detect a Birthday Card using the It’s a Mystery Stamp Set by Kraftin’ Kimmie Stamps!

Thank you for stopping by!

Hugs,
Laurie

Game on Platform Card

February 25, 2023 Leave a comment

A pop-up card with Super Mario Brothers — Game on Platform Card

Hello Crafty Friends! It’s Laurie here to share my Game on Platform Card using the Game on Limited Edition Box by Kindred Stamps!

One of my brother’s recently had a birthday and he loved playing Super Mario Brothers when he was growing up. I also bought the Lawn Fawn Platform Pop-Up Dies and the Platform Pop-Up Add-On Dies recently. So, I thought a platform card using his favourite characters would be a fun card to send him!

The Details of My Card

I coloured several characters with my Copic markers in the bright primary colours from the game. Then, I assembled the platform dies and add-on dies to create my scene. The dies come with everything you need to create a scene. I used the grass and hill dies from the platform and added the sun and clouds dies from the Add-on. Once my platform was completed, I just had to add my characters.

Side View of Platform Card with Super Mario Brothers — Side View of Platform Card

The only embellishment I used was a “game on” puffy sticker on the front.

I love how the platform folds down for mailing and fits perfectly in a 5 ½” x 5 ½” envelope!

————————–

Copic Markers:

Mario
Skin: E000/E00/E21/E11/E04
Hair: E37/E35/E33
Hat/Top: R29/R27/R24
Pants: B29/B26/B24
Shoes: E37/E35/E33
Whites: C3/C1/0

Luigi
Skin: E000/E00/E21/E11/E04
Hair: E347/E35/E33
Hat/Top: G07/YG09/G16
Pants: B29/B26/B24
Shoes: E37/E35/E33
Whites: C3/C1/0

Toad
Skin: E000/E00/E21
Hat: R29/R27/R24/C3/C1/0
Pants: C3/C1/0
Top: B95/B93/B91
Tongue/Mouth: R27/C3
Shoes: E37/E35/E33

Yoshi
Greens: G07/YG09/G16
Whites: C3/C1/0
Oranges: YR07/YR02/YR00
Reds: R29/R24
Tongue/Mouth: R27/C3

Mushrooms
Blue/Greens: BG13/BG11/BG10
Reds: R29/R24/R24
Whites: C3/C1/0

————————–

Card Recipe for My Game on Platform Card:

Game on Limited Edition Box, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Tuxedo Black Memento Ink
Game Over 12” x 12” Paper, Photo Play
Game Over 12” x 12” Paper, Photo Play
Myths & Magic Designer Series Paper, Stampin’ Up!
Platform Pop-Up Dies, Lawn Fawn
Platform Pop-Up Add-On Dies, Lawn Fawn
Family Fun Puffy Stickers, Simple Stories
Pacific Point, Real Red and Cucumber Crush Card Stock, Stampin’ Up!

Finished card size: 5 ¼” x 3-5/8”

————————–

To view my other Kindred Stamps cards, please click here.

Hope you like my Game on Platform Card the Game on Limited Edition Box by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

My Bee’s Knees Card

February 13, 2023 Leave a comment

A Valentine card with a Boy and girl bee holding hearts — My Bee’s Knees Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Bee’s Knees Card as my Design Team Inspiration Card for Conie Fong Art & Design using the super cute Bee With Heart Bundle.

This Bundle includes 5 images:

Title 1: Bee With Heart – Boy (PNG)
Title 2: Bee With Heart – Girl (PNG)
Title 3: Flower Accessory for Bee (PNG)
Title 4: For My Sweet Friend Sentiment (PNG)
Title 5: Sending Hugs Sentiment (PNG)

The Details of My Card

These bees are such a fast colour with my Copic markers and perfect for a super cute Valentine card, but they could also be used for an anniversary, a wedding, even a birthday!

I decided to use the quilt top die and the individual hexagons that you can place where you want to create a fun shaker card. The Graphic 45 paper with the honeycomb pattern, bees and flowers made it feel like you are glimpsing into a busy hive. I used several different shaker elements, especially hearts, to tie in my Valentine theme.

The Bundle comes with sentiments, but I wanted to heat emboss with white on black card stock. I love the contrast of white on black especially for my card! The stamp comes with several great bee sentiments that can be used for all occasions, but I used one appropriate for a Valentine card.

I printed the Flower Accessory several times and coloured them with my Copic markers. To add depth to the flowers, I used an Embossing Stylus Tool and rolled it around the flowers on the Stampin’ Pierce Mat. This made the edges curl up to create dimension. The only embellishment I used was a bumblebee trinket. To add sparkle, I used Clear Wink of Stella on their wings and Stickles on the hearts that they carry.

————————–

Copic Markers:

Yellows: Y38/Y35/Y32
Blacks: C8/C6/C4
Wings: BG11/BG10
Hearts: R29/R27/R24
Flowers: R85/R53/R81/Y38/Y32

————————–

Card Recipe for My Bee’s Knees Card:

Bee With Heart Bundle, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Let It Bee Papercrafting Paper, Graphic 45
Honeycomb Quilt Top Dies, Concord & 9^th
Mini Strips – Bee Mine Stamp, Taylored Expressions
Mini Strips Flag Die, Taylored Expressions
Versamark Ink, Stampin’ Up!
Basic Embossing Powders, Stampin’ Up!
Heat Tools, Stampin’ Up!
Window Sheet, Stampin’ Up!
Foam Adhesive Strips, Stampin’ Up!
Pineapple Delight Crystals, Studio Katia
Peppermint Jazz Sparkletz Embellishments, Buttons Galore & More
Black and White Hearts, Gina K. Designs
Love Hearts Shaker Elements
Embossing Stylus Tool Set, Recollections
Stampin’ Pierce Mat, Stampin’ Up!
Bumblebee Trinkets, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!
Stardust Stickles, Ranger
Basic White, Basic Black, and Bumblebee Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

To view my other Conie Fong Art & Design projects, please click here.

Hope you like my Design Team Inspiration Card using Bee With Heart Bundle for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

My Love Potion Card

February 3, 2023 Leave a comment

A Valentine Card with a girl holding a love potion — My Love Potion No. 9 Card

Hello Crafty Friends! It’s Laurie here! I am sharing My Love Potion No. 9 Card as my Design Team Inspiration Card for Paper Nest Dolls using Love Potion Avery from the Love Potion Set. This Set includes 3 stamps which are Love Potion Amara, Love Potion Avery, and the Love Potion.

The Details of My Card

For my card, I decided to create a fun faux shaker card. I have been wanting to make one for a while and thought this would a perfect card for it! My card is super easy and fast to make!

For those of you who don’t know what a faux shaker card is, I used a clear envelope over my project. I then added my shaker bits to the bag and sealed it. Easy peasy!

I love the Valentine Doodlebug paper that I used for the backdrop of my card. The sentiment piece was also from the Doodlebug paper pad, and I just framed it with my colour scheme.

Since I added sequins and hearts as my shaker pieces, I decided to go simple with the other embellishments. I added layered die cut hearts to one corner of the sentiment with a heart gem on top.

The Love Potion Set comes with the Love Potion by itself. So, I coloured it like the one Avery is holding and added it to another corner of the sentiment.

The finishing touch was Glossy Accents to her glasses and beaker and Stickles to the hearts in the potions.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: E49/E47/E44/E43/E42
Reds: R29/R27/R24
Pinks: R81/R83/R85
Blues: B000/B00

Close Up of My Love Potion No. 9 Card — Close Up of Love Potion Avery

————————–

Card Recipe for My Love Potion No. 9 Card:

Love Potion Set, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Love Bugs 6” x 6” Paper Pad, Doodlebug Design Inc.
Detailed Hearts Die, Stampin’ Up!
Two of Hearts Dies, Cheery Lynn Designs
Clear Medium Envelopes, Stampin’ Up!
Love Affair Sparkletz Embellishments, Buttons Galore & More
Peppermint Jazz Sparkletz Embellishments, Buttons Galore & More
Rouge Sequins, Craft Medley
Marshmallow Premium Sequins, 28 Lilac Lane
Valentine Day Stickers, Recollections
Glossy Accents, Ranger
Star Dust Stickles, Ranger
White Gelly Roll Pen, Sakura
Basic White, Real Red, and Polished Pink Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team card for Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

Birthday…Happy Birthday Card

November 1, 2022 1 Comment

A file folder card — Birthday…Happy Birthday Card

Hello Crafty Friends! It’s Laurie here to share my Birthday…Happy Birthday Card using Secret Agent by Kindred Stamps! My Hubby is a big fan of the James Bond movies and when I saw this stamp set, I knew it would be hit for his birthday card!

The Kindred Stamps Design Team had several inspirational cards that inspired me to create my own version of a file folder with the Magic Iris. I knew that I wanted to use both elements on my card.

The Details of My Card

I had a lot of fun creating my file folder and it had to be a certain size to fit the Magic Iris. So, it is a little wider than a regular A2 card base since the folder tab sticks out. The File Folder Edgelit Dies by Stampin’ Up! are retired, but I have made a file folder with my Envelope Punch Board in the past as well. There is also a file folder in the Specimens Edgelit Dies, but I needed a larger one to fit the iris.

For the front of the folder, I decided to make it look like it’s been through the wars with blood running down the front (just like the opening of the movies! Lol!), blood splatter, mysterious footprints, and a few spy paraphernalia items! I even had the blood run onto the sentiment piece. The “Confidential” and “Top Secret” stamps come with the set and were perfect for my theme! To make it even more rough, I blended some Vintage Photo Ink on the edges of the folder and the sentiment.

Inside My Card

Amanda Stevens, a Design Team Member for Kindred Stamps, created a file folder PDF that you can download for both birthday and Father’s Day. Here is the link to her YouTube channel that lists the files. I used the birthday mission part for the inside of my card. Love that you can customize it to suit your needs! I added My Hubby’s birthday date and his “also known as” (aka) handle “Sweetie” to the file. Lol! The piece of washi tape was his secret agent’s name that had been “redacted”! The stamp set even comes with a martini glass and I couldn’t resist using it! Again, I distressed the brief with ink and add some blood splatters before gluing it at the top and adding some metallic dots like the brief was clipped to the folder.

For the other side, I decided to use the Magic Iris to mimic the opening of the movies when Bond enters. I embossed in black the Spiral Dye Stamp Set onto the black cardstock from which I die cut the front of the Iris. The part that wasn’t used for the iris, I glued down to continue the spiral on the page. I had die cut the “Filed” tab and had planned to add it to the front of the folder, but in the end, I placed it under the Iris to give the black a bit of colour.

————————–

Copic Markers:

Skin: E04/E11/E21/E00/E000
Hair: YR31/E37/E35/E33
Suit: C9/C7/C4
Shoes: C7/C6/C4
Tie/Gun: C3/C1
Shirt: C1/0

————————–

Card Recipe for My Birthday…Happy Birthday Card:

Secret Agent, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Galvanized Metallic Sheet, Stampin’ Up!
Magic Iris Dies, Lawn Fawn
File Folder Edgelit Dies, Stampin’ Up!
Specimen Thinlits Dies, Sizzix
Spiral Dye Stamp Set, Stampin’ Up!
Gorgeous Grunge Stamp Set, Stampin’ Up!
Ghoulish Grunge Stamp Set, Stampin’ Up!
Daring Adventure Stamp Set, Stampin’ Up!
It’s a Mystery!, Kraftin’ Kimmie Stamps
Rustic Metallic Adhesive Dots, Stampin’ Up!
Magnifying glass charms antique silver tone, Nicole de Bruin Charms
Washi Tape, Stampin’ Up!
Real Red Classic Ink Pad, Stampin’ Up!
Early Espresso Classic Ink Pad, Stampin’ Up!
VersaFine, Onyx Black, Tsukineko
Tim Holtz Vintage Photo Distress Ink Pad, Ranger
Blending Brushes, Stampin’ Up!
Very Vanilla, Basic Black, Basic Gray
and Real Red, Card Stock Stampin’ Up!

Finished card size: 4.5” x 5.5”

Birthday…Happy Birthday Card in Action

————————–

For more of my Kindred Stamps cards, please click here.

Hope you like my Birthday…Happy Birthday Card using the
Secret Agent by Kindred Stamps!

My Pop & Twist Halloween Card

October 4, 2022 Leave a comment

Halloween Card with a Signpost — My Pop & Twist Halloween Card

Hello Crafty Friends! It’s Laurie here! I am sharing My Pop & Twist Halloween Card as my Design Team Inspiration Card for Paper Nest Dolls. I was honoured to have been asked to present my colouring and a project this past weekend for the Paper Nest Dolls’ Not So Spooky Magical Weekend! So, I created a tag for the event, but I had so much fun that I created a card using the stamps from the retreat and based it on my tag with a twist!

The Details of My Card

For my card, I decided to create a Pop & Twist card. I love how when you open the card, the stamps on the inside fold out and pop up!

My Card in Action

The front of the card was based on the tag that I presented with a few tweaks to fit the card size.

Halloween Tag — My Tag from the Paper Nest Dolls’ Not So Spooky Magical Weekend

The inside was where all the magic happened as you open the card! When I saw these cute critters, I knew I wanted to create a twist and pop card!

I used very little decorations on the inside since I wanted the card to fold as flat as possible, but I couldn’t resist some glittery bats and Halloween words.

————————–

Copic Markers:

Spooky Signpost

Pumpkins: E15/YR18/YR15/YR14/YR12
Pumpkin Eyes: YR18/YR14/Y15
Wood Post/Pumpkin Stems: E29/E25/E21
Orange Sign: YR18/YR15/YR14/YR12
Yellow Sign: Y38/Y17/Y15
Red Sign: R29/R27/R24/R22
Gray Sign/Spider: C5/C3/C1
Grass: G99/G94/G21

Girl Ghost

Sheet: B0000/B000/0
Nose/Mouth: C7/C5/C3
Bow: R29/R27/R24/R22/C5/C3/0

Dog

Fur: E39/E37/E35/E33/E31
Scarf: C7/C5/C3/C1
Collar: B99/B95/B93
Pumpkin: E15/YR18/YR15/YR14/YR12
Pumpkin Eyes: YR18/YR14/Y15

Boy Ghost

Sheet: B0000/B000/0
Nose/Mouth: C7/C5/C3

Cat

Fur: C7/C5/C3/C1/R20
Hat: B97/B95/B93
Scarf: B0000/B000/0
Pumpkin: E15/YR18/YR15/YR14/YR12

————————–

Card Recipe for My Pop & Twist Halloween Card:

Not So Spooky Magical Weekend Stamps, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Boo Crew, Simple Stories
Black Glimmer Paper, Stampin’ Up!
Brother Scan & Cut
Creatables Border with Pumpkins, Marianne Design
Spooky Bat Punch, Stampin’ Up!
Precision Die – Halloween Reverse-cut Words, Frantic Stamper
Black Stampin’ Dimensionals, Stampin’ Up!
Cheese Cloth, My Kitchen
Black Sharpie
Basic Black and Pumpkin Pie Card Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

Measurements:

Basic Black:
- Card Base: 4 ¼” x 11” scored a 5 ½”
- Panel Strip: 10” x 3 ½” scored on long side at 2 ½”, 5” & 7 ½”
- Pop Out Mechanism: 8” x 3 ½” scored on short side at 1 ¾”
  - Mark long side at 2 ¼” & 5 ¾” (both sides) and score diagonally
Pumpkin Pie:
- Front Card Mat: 5-3/8” x 4-1/8”
- Panel Mats: (4) 3-3/8” x 2-3/8”
Designer Paper:
- Front Card: 5 ¼” x 4”
- Inside Panels: (4) 3 ¼”x 2 ¼”
Basic White (For Inside Card): 5 3/8” x 4 1/8”

Stamp Sizes:

Spooky Signpost: 4 ½” Tall
Girl Ghost: 2 ½” Tall
Dog: 2 ½” Tall
Boy Ghost: 2 ½” Tall
Cat: 2 ¾” Tall

————————–

Downloadable Pop & Twist Card Template

To download a PDF of the Pop & Twist Card Template, please click here or on the picture.

To view my other Paper Nest Dolls cards, please click here.

For more of my cards, please join my Facebook Group.

Hope you like my Design Team card for Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

Congrats Grad Wiper Card

June 13, 2022 Leave a comment

A Wiper Card for a Graduate — Congrats Grad! Wiper Card

Hello Crafty Friends! It’s Laurie here to share my Congrats Grad Wiper Card. This fun interactive card is perfect way to celebrate a special grad on his/her special day!

The Details of My Card

This card is super easy to make since I used a Wiper Card Kit by Photo Play. All the guess work for how to make a wiper card was done for me. I just had to decorate my card.

The Celebrate! Paper Pad by Simple Stories was perfect with such sentiments as “Hip Hip Hooray” and “Yay, yay, yay” and “Way to go” on it. It’s supposed to be for birthdays, but I thought all those sentiments suited a grad!

Close Up of Year on Front of Card — Close Up of Year in Broadway Lights

Once I added my paper, it was time to decorate my card. I thought it would be neat to have the year on the front in Crushed Curry like it was lite up on Broadway! To decorate the Broadway sign, I used several stickers that matched my grad theme. But the fun part is when you pull the card open, the “Congrats Grad” sentiment with a sparkly Grad cap pops up! Just like when the grads throw their caps!

————————–

Card Recipe for Congrats Grad Wiper Card:

Wiper Card Kit, Photo Play
Celebrate! 6” x 8” Paper Pad, Simple Stories
Blue Ribbon Stamp Set, Stampin’ Up!
Tuxedo Black Memento Ink, Stampin’ Up!
1 ¼” Circle Punch, Stampin’ Up!
1-3/8” Circle Punch, Stampin’ Up!
Broadway Lights Dies, Stampin’ Up!
Playful Alphabets Dies, Stampin’ Up!
Hats Off Cardstock Stickers, Doodlebug Designs Inc.
Graduation Shape Sprinkles, Doodlebug Designs Inc.
Grad Caps and Diploma Repeats, Jolee’s Boutique, EK Success
Starry Sky, Crushed Curry and Basic White Card Stock Stampin’ Up!

Finished card size: 4.25” x 5.5”

Congrats Grad Wiper Card in Action

————————–

Hope you like My Congrats Grad Wiper Card using
the Wiper Card Kit by Photo Play!

For more of my interactive cards, please click here.

Thank you for stopping by!

Hugs,
Laurie