Boo and Scary On Halloween Card

Halloween Card with Trick-or-Treaters on it
Boo and Scary On Halloween Card

Hello Crafty Friends! Laurie here again! I am sharing my Boo and Scary On Halloween Card using the Scary Cute Bundle which includes the Scary Cute Stamp Set and the Scary Silhouettes Dies. I love making Halloween cards and had a lot of fun with this bundle! In fact, I made 2 cards using it with slight variations. I will share the other one next week as we lead up to Halloween!

The Details of My Card

For my card, I thought the Grove Dies die cut in Basic Black would create a perfect spooky scene for my little tricker-or-treaters! So, I pulled out my Blending Brushes and Masking Paper to create the eerie night sky. I used the 1 3/8” inch circle die (second smallest) from the Layering Circles Dies to create my moon. Once that was in place, I blended Tuxedo Black on the edges of the Basic White piece, followed by Night of Navy and then Crushed Curry around the moon. When I removed the mask, I lightly brushed Crush Curry over the moon to give it a yellow glow.

My trick-or-treaters were stamped in Versamark, and heat embossed in black. I wanted to get a good solid image and thought this would work better than just stamping. Tip: use the die cut grove to help position where you would like you stamp to go.

Since the die cut grove took up most of the front, I made the Gingham Cottage DSP 1/8” larger all around to allow it to be seen and gave the card some colour.

There was room at the bottom to place the Pumpkin Pie Glitter Washi Tape. It ties in the DSP and the sentiment which was embossed in black as well. A few sequins were added to add some interest.

Supplies for My Boo and Scary On Halloween Card:

Stamps/Bundles/Dies: Scary Cute Bundle (159852), Grove Dies (157844), Layering Circles Dies (151770)

Inks: Tuxedo Black Memento Ink Pad (132708), VersaMark Ink (102283), Night of Navy Classic Stampin’ Pad (147110), Crushed Curry Classic Stampin’ Pad (147087)

Paper: Basic Black (121045), Pumpkin Pie (105117), Basic White (159276), Gingham Cottage Designer Series Paper (159651)

Accessories: Blending Brushes (153611), Stampin’ Up! Masking Paper (155480), Basics Embossing Powder (155554), Heat Tool (129053), Embossing Additions Tool Kit (159971), Adhesive-Backed Seasonal Sequins (159964), Glitter Washi Tape (159973), Bone Folder (102300), Black Stampin’ Dimensionals (150893), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of Tricker-or-Treaters on Halloween Card
Close Up of Tricker-or-Treaters

Measurements: 

  • Basic Black: 
    • 5 ½” x 8 ½” scored a 4 ¼”
    • 5 ¼” x 4”
    • Scraps for Bats
  • Basic White:
    • 5-1/8” x 3-7/8”
  • Pumpkin Pie:
    • Scrap (sentiment)
  • Gingham Cottage Designer Series Paper: 5-3/8” x 4-1/8”

More Information on My Boo and Scary On Halloween Card:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Mini Slimline Rose Card

A birthday card with a rose on it
Mini Slimline Rose Card

Hello Crafty Friends! Laurie here again! I was honoured to be asked to present my colouring with Stampin’ Blends at a Playdate during World Card Making Day for fellow Stampin’ Up! demonstrators. I am sharing my Mini Slimline Rose Card from the WCMD using products from the Abigail Rose Suite Collection by Stampin’ Up!

The Details of My Card

For my card, I decided to use the Cottage Rose Stamp Set since the artist has indicated where the shadows are with their line art. I thought it would be a good image for beginners. It also has two different areas that I could demonstrate the techniques of light-to-dark on the petals and dark-to-light on the leaves. I have included links to some videos at the end of this post that cover these techniques and more.

The Split Card Textures Dies were top of my list to buy when I saw them in the catty. I have seen a lot of cards made with them using the regular A2 (4 ¼” x 5 ½”) card base, but I thought a mini slimline card would be a fun alternative!

Mini slimline cards can come is different sizes to match your design/products. For instance, a 3” x 6” mini slimline is perfect for 6” x 6” paper packs. They also come in 3 ½” x 6” or 3 ½” x 6 ½”. They fit in No. 8 envelope (3-5/8” x 6 ½”) which you can pick up at any dollar store. For my card I choose 3 ½” x 6” since this size fitted the Split Card Textures Die well.

I love how the Split Card Textures Die allows the beautiful Abigail Rose Designer Series Paper to show through on one half of the card while allowing the rose to fit perfectly in the other corner! Some Petal Pink die cut flowers extend the focal point into the card. The Natural Finish Ribbon adds a nice backdrop for the sentiment. And a scattering of gems, one on the flower and two in the top right corner, tie in the colour scheme.

Supplies:

Stamps/Bundles/Dies: Abigail Rose Suite Collection (159052), Cottage Rose Bundle (159048) (Included in Collection), Split Card Textures Dies (159162), Stylish Shapes Dies (159183)

Inks: Tuxedo Black Memento Ink Pad (132708)

Paper: Very Vanilla Thick (144237), Petal Pink (146985), Old Olive (100702), Very Vanilla (101650), Abigail Rose Designer Series Paper (159037) (Included in Collection)

Accessories: Petal Pink Stampin’ Blends Combo Pack (154893), Old Olive Stampin’ Blends Combo Pack (154892), Stampin’ Blends Color Lifter (144608), Elegant Faceted Gems (152464), Natural Finish Ribbon (159051) (Included the Collection), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements: 

  • Very Vanilla Thick: 
    • 7” x 6” scored at 3 ½” on 7” side
  • Petal Pink:
    • 3-3/8” x 6-7/8”
    • Scrap for flower die
  • Old Olive:
    • 3 ¼” x 5 ¾”
  • Very Vanilla:
    • 3” x 3”
    • Scrap for sentiment
  • Abigail Rose Designer Series Paper:
    • 3 ¼” x 5 ¾”
Close Up Colouring of Rose
Close Up Colouring of Rose

More Information on My Mini Slimline Rose Card:

How to Use Stampin’ Blends
Stampin-Up-Blends-2020.pdf

Part 1Whiskey Business Card using Blending Different Colours Technique
Video Tutorial: Blending Different Colours Together

Part 2Country Harvest Card using Light to Dark Technique
Video Tutorial: Light to Dark/Dark to Light Colouring

Part 3Beautiful Poppy Birthday Card using Smooth Colouring Technique
Video Tutorial: Smooth Colouring

Part 4Let’s Gather Together Card using Tip to Tip Blending Technique
Video Tutorial: Tip to Tip Colouring

Part 5So Grateful Cardinal Card using Flicking Colouring Technique
Video Tutorial: Flicking Colouring

Part 6Let’s Celebrate You Card using Flicking of Different Colours Technique
Video Tutorial: Flicking of Different Colours Technique

No-Lines Technique CardsMy Cardinal Anniversary Card and My Cardinal Card

How to Create a Scene: https://youtu.be/6w4fkxgA9rg

For more of my Stampin’ Blends cards, please click here.

For more of my Stampin’ Up! cards, please click here.

For more of my cards, please join my Facebook Group or my Instagram.

You will find the items listed above in my online store.

Furry & Bright Christmas Card

Christmas card with a dog on it
Furry & Bright Christmas Card

Hello Crafty Friends! Laurie here again! I am sharing my Furry & Bright Christmas Card using the Christmas Scottie Bundle which includes the Christmas Scottie Stamp Set and the Scottie Dog Punch by Stampin’ Up! Since today is National Dog Day, I thought it would be fun to post this cute card!

The Details of My Card

For my card, I pulled my colour scheme from the Sweetest Christmas DSP in Real Red, Garden Green and Pool Party.

I knew I wanted my tartan Scottie in red. So, I stamped the tartan in Real Red and punched him and the bow out. Punches make it so easy!

I love the iridescent foil of the Wonderful Snowflakes! I’m so glad that they carried over from last year! Tip: Don’t throw away any leftover sheets once you have used all the snowflakes. I used a small die to cut the snowflakes that I used on my card. This way they match the larger Wonderful Snowflake behind the dog.

Die Cut Snowflakes

For the Pool Party Stitched Rectangle, I stamped the snowflakes that come in the stamp set in Pool Party for a tone-on-tone look. The sentiment was stamped in Garden Green on a Basic White Stitched rectangle leaving enough room for the punched bow.

For embellishments, I used a bow of Garden Green on the Scottie dog, Red Rhinestones on the snowflakes and a scattering of sequins.

Supplies:

Stamps/Bundles/Dies: Christmas Scottie Bundle (159744), Stitched Rectangles Dies (151820), Frosted Flurry Dies (159811)

Inks: Garden Green Classic Stampin’ Pad (147089), Real Red Classic Stampin’ Pad (147084), Pool Party Classic Stampin’ Pad (147107)

Paper: Real Red (102482), Basic White (159229) (159276), Pool Party (122924), Sweetest Christmas Designer Series Paper (159559)

Accessories: Wonderful Snowflakes (156340), Real Red & Garden Green 3/8″ Ribbon Combo Pack (159577), Adhesive-Backed Seasonal Sequins (159964), Red Rhinestone Basic Jewels (146924), Bone Folder (102300), Multipurpose Liquid Glue (110755) Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of Scottie Dog
Close Up of Scottie Dog

Measurements: 

  • Real Red: 
    • 5 ½” x 8 ½” scored a 4 ¼”
  • Pool Party:
    • 4 ¾” x 3 3/8”
  • Basic White:
    • 2 ¼” x 2 ½”
    • 7/8” x 2 7/8” (sentiment)
  • Sweetest Christmas Designer Series Paper: 5 ¼” x 4”

More Information on My Furry & Bright Christmas Card:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Hues of Happiness Birthday Card

Two cards with flowers on them.
Hues of Happiness Birthday Card

Hello Crafty Friends! Laurie here again! I am sharing my Hues of Happiness Birthday Card using the Hues of Happiness Suite Collection by Stampin’ Up!

The Details of My Card

This card was for a swap using products from the new Annual Catty. I love the bright and happy colours of the Hues of Happiness DSP! I also love that the dies die cut the flowers from the DSP!

Video of Die Cutting Flowers from the DSP

For my card, I thought a fun split panel card would work with the spiral notebook die as the panel joining the other 2 panels. I can see this spiral die working for so many cards, especially school cards! The two flowers and leaves were die cut from the DSP and matched the DSP colours on the panels.

One of the cards with pink and purple flowers on it
Version One of the Card

Since there are so many flowers that I could die cut, I decided to create different colour cards in the same layout. These two cards are only some of the colour combinations that I used.

A card with Blue and yellow flowers on it.
Second Version of the Card

Tip: to adhere the two card panels, I lined up the bottom panel with the bottom of the card base. Then, I added glue only to the top and bottom of the Basic White piece, careful not to add it too close to the centre. I made sure to leave enough room on the bottom panel to add my ribbon.

The sentiment was stamped onto ½” scrap and then snipped the edges on the angle. The Fresh Freesia was a 5/8” scrap and trimmed to match the Basic White piece.

The ribbon was wrapped around the bottom panel and tied in a bow. A scattering of matching Glossy Dots that come in the Suite added some shimmer.

Close Up of Version One Card
Close Up of Version One Card

Supplies:

Stamps/Bundles/Dies: Hues of Happiness Suite Collection (158828)

Inks: Granny Apple Green (147095)

Paper: Fresh Freesia (155613), Basic White (159229)

Accessories: Whisper White Crinkled Seam Binding Ribbon (151326), Glossy Dots Assortment (included in Suite), Bone Folder (102300), Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683), Paper Snips Scissors (103579)

Close Up of Version Two Card
Close Up of Version Two Card

Measurements: 

  • Fresh Freesia: 
    • 4 ¼” x 9 ½” scored a 5 ½”, fold and trim one side at 2”. Taking the separate piece, trim 2” off keeping this for the bottom panel.
    • Scrap for sentiment
  • Basic White:
    • 5 ¼” x 4” (inside of card)
    • 3 ½” x 2 ¾”
    • Scrap for sentiment
  • Hues of Happiness DSP:
    • 4” x 1 ¾” (2 pieces)
    • 2 die cut flowers and leaves

More Information on My Hues of Happiness Birthday Card:

Get to know the Hues of Happiness Suite with a burst of colorful florals! Check out this suite to use on your next paper-crafting projects and spread happiness. To find out more about this beautiful Suite, checkout this Stampin’ Up! video: https://www.youtube.com/watch?v=N9ac4l3EOPs

For more of my Stampin’ Up! cards, please click here.

You will find the other items listed above in my online store.

Hello Ladybug Card

Card with a ladybug and daisies on it.
Hello Ladybug Card

Hello Crafty Friends! Laurie here again! I am sharing my Hello Ladybug Card using the Hello Ladybug Stamp Set and matching Ladybug Builder Punch.

The Details of My Card

This card was for a swap, but the Annual Catty was retiring. We couldn’t use any retiring product on the card. So, my solution was lots of punches and embellishments that I knew would carry over!

For my card, I decided to use the Picture This Dies again since it reminded me of the dots on the ladybug’s wings. These dies are so versatile, and I have used them for several cards! I used the circles die for this card and thought it would be neat having the daisies popping out of the holes!

Before adhering with dimensionals the die cut Real Red piece to the Basic Black mat, I wrapped white Baker’s twine around one of the holes and tied it in a bow.

After lots of punching and layering 2 sets of petals on top of each other followed by the flower centre from the Poppy Moments Dies, I had 3 sets of flowers for the holes.

Next came the ladybug. But first, I heat embossed in black the spots before I punch the wings out of Real Red cardstock. Then I punched out the body in Basic Black and assembled the ladybug.

Since the stamp set is photopolymer and I could line up my stamp easily, I die cut the smallest circle out of the Circles Die and then stamped the hello in black. Tip: only use the part of the die you want, not the whole thing to save paper. Another tip is use Multipurpose Liquid Glue to allow you time to slide the sentiment piece in place.

A scattering of black Classic Dots and Red Rhinestones tied in my ladybug theme.

Supplies:

Stamps/Bundles/Dies: Hello Ladybug Stamp Set (157693), Picture This Dies (155559), Poppy Moments Dies (151594)

Inks: Tuxedo Black Memento Ink Pad (132708), VersaMark ink (102283)

Paper: Basic White Thick (159229), Basic Black (121045), Basic White (159229) (159276), Real Red (102482), Crushed Curry (131199)

Accessories: Ladybug Builder Punch (157698), Medium Daisy Punch (149517), Baker’s Twine Essentials Pack (155475), Red Rhinestone Basic Jewels (146924), Classic Matte Dots (158146), Basics Embossing Powder (155554), Heat Tool (129053), Bone Folder (102300), Multipurpose Liquid Glue (110755Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of Card
Close Up of Card

Measurements: 

  • Basic White Thick: 
    • 5 ½” x 8 ½” scored a 4 ¼”
  • Basic Black:
    • 5 ¼” x 4”
    • Scrap for Ladybug body
  • Real Red:
    • 5” x 3 ¾”
    • Scrap for wings
  • Basic White:
    • 1 ¾” strip, enough to punch 6 flowers
    • Hello: 1” x 1”
  • Crushed Curry
    • Scrap for flower centers x 3

More Information on My Hello Ladybug Card:

For more of my Stampin’ Up! cards, please click here.

You will find the other items listed above in my online store.

You’re Flippin’ Awesome Card

Card with BBQ Tools on it
You’re Flippin’ Awesome Card

Hello Crafty Friends! Laurie here again! Father’s Day is just a few weeks away and I thought I would share with you my You’re Flippin’ Awesome Card using the new He’s The Man Suite Collection by Stampin’ Up! This suite is perfect for car lovers, grilling enthusiasts, camping buffs, and more! My Father-in-law loves to BBQ and I though this suite would make a perfect Father’s Day card for him! 

The Details of My Card

This card is a fast and easy card to make! No stamping involved on the front, but I did stamp the inside with “Wishing You a Happy Father’s Day” using the He’s All That Stamp Set that comes in the Collection.

The He’s The Man Designer Series Paper comes with 2 die cut sheets and I used one of the die cuts for my sentiment. Easy-peasy! To give it more of a focal point, I added a piece of DSP and die cut it out using the He’s All That Dies. I turned it so that it flanks the sentiment on either side. I love the “framed” look that the die gives the die cut piece. Gave it that little extra detail!

The Rustic Metallic Adhesive-Backed Dots were a perfect accompaniment to my manly card! I placed one on either side of the sentiment and one above it to the left. Tip: you always want odd numbers since they are pleasing to the eye.

The final thing I added to my focal point was some looped Linen Thread behind everything. How manly is that thread!

For the DSP, I made it smaller than usual since I wanted the Brick & Mortar 3D Embossing Folder to show up more. I went with a Cajun Craze bricked piece since it matched my DSP and what is more appropriate than orange bricks!

All this was place on a Sahara Sand card base.

Supplies:

Stamps/Bundles/Dies: He’s The Man Suite Collection (159083)

Inks: Tuxedo Black Memento Ink Pad (132708) For sentiment on inside card

Paper: Sahara Sand (121043), Cajun Craze (119684), Basic White (for inside card) (159276), He’s the Man 12″ x 12″ Specialty Designer Series Paper (included in Collection)

Accessories: Brick & Mortar 3D Embossing Folder (149643), Rustic Metallic Adhesive-Backed Dots (included in Collection), Linen Thread (104199), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of Focal Point on card
Close Up of My Card

Measurements: 

  • Sahara Sand: (2 pieces)
    • 5 ½” x 8 ½” scored a 4 ¼”
    • 3 ¼”x 4 ½”
  • Cajun Craze”
    • 5 ¼” x 4”
  • Basic White: (inside of card)
    • 5 ¼” x 4”
  • He’s the Man Specialty Designer Series Paper: (2 pieces)
    • 3-1/8” x 4-3/8”
    • 2-3/8” x 1-5/8”

More Information on My You’re Flippin’ Awesome Card :

For more of my Stampin’ Up! cards, please click here.

Stampin’ Up! video that shows off the fun designs of the He’s the Man Suite: https://www.youtube.com/watch?v=UW1QMUO3s8E

You will find the other items listed above in my online store.

A Cup of Thanks Card

A Card with Tea Cups on it
A Cup of Thanks Card

Hello Crafty Friends! Laurie here again! I am sharing A Cup of Thanks Card using the Cup of Tea Bundle by Stampin’ Up! I loved the idea of stacking the teacups in different colours!

Details of My Card

For my card, I wanted to highlight the new 2022-24 In Colors and what better way than with the Tea Boutique Designer Series Paper that incorporates all the new colors in its pretty designs! I also used the In Color 2022–2024 Designer Series Paper for two of my teacups. Tip: Since the DSP is double-sided, I turned the middle teacup to face the opposite way. For the bottom teacup, I love the combination of Parakeet Party and Starry Sky together. So, I used the stackable die cuts to create my teacup. To highlight my teacups, I used a stitched scallop rectangle in Basic White.

I’m so happy that Stampin’ Up! has released new stitched circle/square dies and I couldn’t rest using one of the circles for my Starry Sky sentiment! Don’t you just love the Fun Flowers Resin Shapes and they come in Parakeet Party as one of the colours!

I thought placing the Tea Boutique 6″ x 6″ Designer Series Paper on an angle behind the focal point was a fun idea. The Stitched Greenery Die with its tone-on-tone created a subtle background that doesn’t distract from the focal point, but still adds interest.

I added a stamped die cut lemon wedge and a Sweet Sorbet Glimmer heart to continue my caring thank you theme.

Close Up of the tea cups on card
Close Up of Teacups on My Card

Supplies:

Stamps/Bundles/Dies: Cup of Tea Bundle (158667), Scalloped Contours Dies (155560), Stylish Shapes Dies (159183), Stitched Greenery Die (155451)

Inks: Starry Sky Classic Stampin’ Pad (159212), Crushed Curry Classic Stampin’ Pad (147087)

Paper: Basic White Thick Cardstock (159229), Basic White (159276), Orchid Oasis (159267), Parakeet Party (159259), Starry Sky (159263), 2022–2024 In Color 6″ x 6″ Glimmer Paper (159246), In Color 2022–2024 6″ x 6″ Designer Series Paper (159253), Tea Boutique 6″ x 6″ Designer Series Paper (158659)

Accessories: Fun Flowers Resin Shapes (159123), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements: 

  • Basic White Thick Cardstock:
    • 5 ½” x 8 ½” scored a 4 ¼”
  • Orchid Oasis: 5 ¼” x 4”
    • 1 5/8” x 1 5/8”
  • Basic White:
    • 3 ¾” x 2 ½”
    • Scraps for Lemon
  • Parakeet Party: 2 ¼” x 1 ½”
  • Starry Sky: 2 ¼” x 1 ½”
  • Sweet Sorbet Glimmer Paper:
    • Scrap
  • Tea Boutique Designer Series Paper
    • 5” x 2”

More Information on A Cup of Thanks Card:

For more of my Stampin’ Up! cards, please click here.

More information on the 2022-24 In Colors and the Tea Boutique 6″ x 6″ Designer Series Paper: https://youtu.be/3nqVmRjyy1o

Behind the Scenes (Facebook Live): In Colors with Sara Douglas and Holly Anderson: https://fb.watch/dd4_58YdPA/

You will find the other items listed above in my online store.

My Happy Mother’s Day Card

A Mother's Day Card with tulips in rain boots
My Happy Mother’s Day Card

Hello Crafty Friends! Laurie here again! I am sharing My Happy Mother’s Day Card using the Flowering Rain Boots Bundle by Stampin’ Up! 

The Details of My Card

For my card, I thought the Flowering Fields Designer Series Paper and the Flowering Rain Boots Bundle would be a perfect match! And I couldn’t resist using the tulip border die that comes in the Flowering Tulips Bundle!

I pulled my colour scheme of Highland Heather, Fresh Freesia and Evening Evergreen from the DSP. I love that the coordinating dies cut out the stamped pieces! By adding a piece of vellum under the boots, a focal point was created, but still allowed the die cut tulip border to show through. The sentiment was heat embossed with white on Highland Heather and then die cut with one of the All Dressed Up Dies. A scattering of the sweet Brass Butterflies finished the card off nicely.

Supplies:

Stamps/Bundles/Dies: Flowering Rain Boots Bundle (157691), Flowering Tulips Bundle (157678), All Dressed Up Dies (151665), Stitched Rectangles Dies (151820)

Inks: Highland Heather Classic Stampin’ Pad (147103), Evening Evergreen Classic Stampin’ Pad (155576), Fresh Freesia Classic Stampin’ Pad (155611), VersaMark Ink (102283)

Paper: Highland Heather (146986), Basic White (159276), Vellum (101856), Flowering Fields Designer Series Paper (157670)

Accessories: Basics Embossing Powder (155554), Brushed Brass Butterflies (158136), Heat Tool (129053), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of Rain Boots
Close Up of Rain Boots

Measurements: 

  • Highland Heather: (2 pieces)
    • 5 ½” x 8 ½” scored a 4 ¼”
    • 2 ½” x ½” (sentiment)
  • Basic White:
    • 5 ¼” x 4”
    • Scraps for Boots, tulips, and leaves
  • Vellum:
    • 4” x 2-5/8”
  • Flowering Fields Designer Series Paper
    • 3” x 3-7/8”

More Information on My Happy Mother’s Day Card:

For more of my Stampin’ Up! cards, please click here.

You will find the other items listed above in my online store.

A Toast for Your Birthday!

A card with a banana in glasses saying Celebrate! Go Bananas!
A Toast for Your Birthday!

Hello Crafty Friends! Laurie here again! I am sharing A Toast for Your Birthday! using the Lots of Pun Paper Pumpkin Past Kit. I had so much fun playing with this Paper Pumpkin Kit! I made some alternative cards (see at end of post for photos) when it was first released in January, but I had some leftover bits and decided to make a fun fold card. The only things I added was some card stock, adhesive and a toast sentiment! Everything else is from the kit.

Video of Pop & Twist Card in Action

This card is for a 12-year-old boy whose birthday is today! Every year I create an interactive card for him. Last year I created a card with the Give a Whirl Dies and in the past years, I created a Never-Ending Card, a Slider card, a wobble card and so on. He always says that I make the best cards EVER! Got to love that!

Details of My Pop & Twist Card

For my card, I decided to create a Pop & Twist card. I love how when you open the card, the images on the inside fold out and pop up!

The front of the card is one of the designs from the kit. I just cut it to fit a portrait card. I added a couple of stamped party hats from the stamp set that is included in the kit. A mat of Granny Apple Green was added behind the focal point.

Close Up of Banana on card
Close Up of Card Front

The inside is where I got creative! There are four panels and I thought that incorporating each of the die cuts (eggs, cherries, banana, and toast) that came with the kit, would work well!

Pop-Up Inside Card
Pop-Up Inside Card

First Panel

For the first panel, I used an egg theme. I love the pun “have an egg-cellent day” and couldn’t resist using “egg-cited for you” too! Just too fun! I used one of the card bases that I cut down with a Granny Apple green mat to fit my panel.

First Panel with Eggs on it
First Panel of Pop-Up Inside of Card

Second Panel

The next panel had the theme of cherries. So, I used the inside of one of the envelopes for the background pattern. I thought the red dots went perfectly with those sweet cherries! This is one of the things I love about the kits! The envelopes are printed both on the outside and the inside. So, once you cut them open, you can reverse the coordinating patterns to suit your design.

Second Panel on Pop Out Inside Card
Second Panel on Pop-Up Inside Card

Third Panel

For the third panel the theme was the banana. Again, I used the inside of an envelope for the background. The speech bubbles are so fun!

Third Panel on Pop-Up Inside Card
Third Panel on Pop-Up Inside Card

Fourth Panel

For the last panel, the theme was the toast. I didn’t have an appropriate sentiment. So, I printed one off on my computer to suit the birthday theme. I used the inside of an envelope once again for my background piece. Aren’t the glasses on the toast fun!

Fourth Panel on Pop-Up Inside Card
Fourth Panel on Pop-Up Inside Card

I added a scattering of the Enamel stickers that came with the kits on all the panels.

Product Details of the Lots of Pun Paper Pumpkin Past Kit

Make cards to “loaf” with the Lots of Pun Paper Pumpkin Past Kit! Restock on cute ‘n’ colorful die-cut snacks and one-of-a-kind patterns and designs. Keep the laughs rolling and those knees slapping with everything you need to make fun ‘n’ fresh cards all year long. Don’t miss out on this egg-cellent opportunity to craft with the Lots of Pun Paper Pumpkin Kit!

Kit includes:

9 printed card bases: 3 each of 3 designs
9 printed envelopes
Precut paper pieces
Precut vellum pieces
Enamel stickers
Twine
Adhesive

Completed card size: 4-1/4″ x 5-1/2″

Product colors: Crumb Cake, Daffodil Delight, Early Espresso, Granny Apple Green,
Pool Party, Poppy Parade

Supplies:

Stamps/Bundles/Dies: Lots of Pun Paper Pumpkin Past Kit (159304)

Inks: Early Espresso Spot (From Kit)

Paper: Pool Party (122924), Granny Apple Green (146990), Printer Paper for toast sentiment

Accessories: Paper Snips Scissors (103579), Bone Folder (102300), Dimensionals (from kit), Stampin’ Seal (152813), Mini Glue Dots (from kit)

Measurements: 

  • Pool Party:
    • Card Base: 4 ¼” x 11” scored a 5 ½”
    • Panel Strip: 10” x 3 ½” scored on long side at 2 ½”, 5” & 7 ½” 
    • Pop Out Mechanism: 8” x 3 ½” scored on short side at 1 ¾”
      • Mark long side at 2 ¼” & 5 ¾” (both sides) and score diagonally
  • Granny Apple Green:
    • 5 ¼” x 4”
    • Panel Mats: (4) 3-3/8” x 2-3/8” 
  • Inside Panels (Envelopes & Card Front): (4) 3 ¼”x 2 ¼” 
  • Daffodil Delight (Outside of Envelope for Inside Card Mat): 5 ¼” x 4”
  • Basic White (For Inside Card): 5” x 3 ¾”

My Other Alternative Cards

My Alternative Cards
My Alternative Cards Using Lots of Pun Paper Pumpkin Past Kit

The Cards from the Kit

Cards From the Lots of Pun Paper Pumpkin Past Kit
Cards From the Lots of Pun Paper Pumpkin Past Kit

For More Information

For more of my Stampin’ Up! cards, please click here.

To view my Paper Pumpkin Alternatives for other kits, please click here.

To order the Lots of Pun Paper Pumpkin Past kit, please click here.

2022-24 In Color Bookmarks

Stampin' Up! 2022-24 In Color Bookmark
Stampin’ Up! 2022-24 In Color Bookmark

Every year I am asked to create a Stampin’ Up! In Color bookmark file. So, I am sharing my 2022-24 In Color Bookmarks using my Stampin’ Up! 2022-24 In Color Bookmark file that I created for this purpose. When you download the PDF files print them with the fit to page setting in the Adobe Acrobat on Basic White. All files are at the end of this post including a German and French version, as well as the files for the 2021-2023 In Colors from last year.

Inks and Cardstock Bookmark

For this bookmark, I kept it simple with just ink and cardstock. First, I stamped one of the leaves from the Hand-Penned Petals Stamp Set and then I used a die cut flower from the Penned Flower Dies.

Inks and Cardstock Bookmark
Inks and Cardstock Bookmark

2022-2024 In Color Stampin’ Write Bookmark

For my next bookmark, I stamped in Memento Ink the cluster of flowers from the Honeybee Home Stamp Set and coloured them in with the Stampin’ Write Markers. Next, I stamped the leaf from Uniquely Artistic Stamp Set. Finally, I die cut the heart with the Teacup Dies.

2022-24 In Color Stampin' Write Markers Bookmark
2022-24 In Color Stampin’ Write Markers Bookmark

Tassel Bookmark

For my next bookmark, I thought it would be fun to create a tassel with the 2022-2024 In Color Baker’s Twine. I added 2022-2024 In Color Matte Decorative Dots to the corresponding colours.

Tassel Bookmark
Tassel Bookmark

Glimmer Bookmark

For this bookmark, I wanted the gorgeous 2022-2024 In Color Glimmer Paper to be front and centre. A simple, but wow bookmark!

Glimmer Bookmark
Glimmer Bookmark

Easy Card Stock Bookmarks

For my last set of bookmarks, I cut a ½” x 11” strip of card stock for each colour. I glue them directly to the print out before cropping the bookmarks down. I them cut them apart creating 5 bookmarks. Fast and easy!

Easy Card Stock Bookmarks
Easy Card Stock Bookmarks

Supplies:

Stamps: Hand-Penned Petals (155070), Honeybee Home Bundle (157952), Uniquely Artistic (158935)

Dies: Brilliant Wings Dies (155523), Penned Flowers Dies (155557), Teacup Dies (160186)

Inks: Sweet Sorbet Classic Stampin’ Pad (159216), Parakeet Party Classic Stampin’ Pad (159208), Tahitian Tide Classic Stampin’ Pad (159210), Starry Sky Classic Stampin’ Pad (159212), Orchid Oasis Classic Stampin’ Pad (159214), Memento Ink (132708)

Paper: Basic White (159276), Sweet Sorbet (159268), Parakeet Party (159259), Tahitian Tide (159261), Starry Sky (159263), Orchid Oasis (159267), 2022/2024 In Color Glimmer Paper (159246)

Accessories: 22-2024 In Color Matte Decorative Dots (159186), 2022-24 In Color Baker’s Twine (159195), In Color Stampin’ Write Markers (159219), Baker’s Twine Essentials Pack (155475)

For Further Information on My 2022-24 In Color Bookmarks:

2022-2024 In Color Bookmark File

English Version
German Version
French Version

2021-2023 In Color Bookmark File

For my post with further details on how I decorated my 2021-2023 Bookmarks, please click here.

English Version
German Version
French Version

My 2021-2023 In Color Bookmarks
My 2021-2023 In Color Bookmarks

For more of my Stampin’ Up!  cards and projects, please click here.

You will find the items listed above in my online store.

My Easter Blessings Card

Easter Card with Daffodils
My Easter Blessings Card

Hello Crafty Friends! Laurie here again! I am sharing My Easter Blessings Card using the Daffodil Daydream Bundle by Stampin’ Up! This bundle is perfect for those last-minute Easter cards that you need to make! 

Details of My Card

I love our yellow and white daffodils that sprout up each year in our garden! So, I decided to go with this colour scheme for my card!

Photo of daffodils
Daffodils in Our Garden

For my card, I wanted to create a soft look by using Soft Suede Ink to stamp my flowers. To go with this soft look, I used my Blender pens to pick up Old Olive and Bumblebee inks to colour my flowers. Guess what I used for my white petals? I used the White Stampin’ Chalk Marker! Perfect way to add that white!

Daffodil stamp being coloured
Colouring of Daffodils with Blender Pen

I stamped the dots in Crumb Cake around my flowers and added the border stamp in Old Olive ink at the base of my card. I carefully positioned the leaves from the Greenery Embossing Folder so that you could see the embossed leaves on either side of the centre piece. The Pansy Petals Designer Series Paper was the perfect accompaniment to my colouring as well as the gingham ribbon bringing out the Bumblebee colour. The sentiment used the Tailor Made Tags Dies. All this card needed was a Bumblebee Trinket flitting around the flowers!

Supplies:

Stamps/Bundles/Dies: Daffodil Daydream Bundle (157795), Stitched Rectangles Dies (151820), Scalloped Contours Dies (155560), Tailor Made Tags Dies (155563)

Inks: Soft Suede Classic Stampin’ Pad (147115), Old Olive Classic Stampin’ Pad (147090), Crumb Cake Classic Stampin’ Pad (147116), Bumblebee Classic Stampin’ Pad (153116)

Paper: Basic White Thick (159229), Soft Suede (115318), Basic White (159276), Old Olive (100702), Crumb Cake (120953), Pansy Petals Designer Series Paper (155807)

Accessories: Greenery Embossing Folders (152716), Bumblebee Gingham Ribbon (153658), Bumblebee Trinkets (155568), Blender Pens (102845), White Stampin’ Chalk Marker (132133), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Closer Up of Coloured Daffodils
Closer Up of Coloured Daffodils

Measurements: 

  • Basic White Thick: 
    • 5 ½” x 8 ½” scored a 4 ¼”
  • Soft Suede: (2 pieces)
    • 4” x 5 ¼”
    • Scrap for tag
  • Pansy Petals Designer Series Paper:
    • 3-7/8” x 5 1/8”
  • Old Olive:
    • 3-7/8” x 3”
  • Basic White: (2 pieces)     
    • 4 ½” x 3-1/8”
    • 2 ¼” x 7/8” (Tag)
  • Crumb Cake:
    • 4” x 2-5/8”

More Information on My Easter Blessings Card:

For more of my Stampin’ Up! cards, please click here.

For the Daffodil Daydream Bundle, please click here.

You will find the other items listed above in my online store.

Beyond the Horizon Alternative Cards

Alternative Cards using the March 2022 Paper Pumpkin
Beyond the Horizon Alternative Cards

Hello Crafty Friends! Laurie here again! I am sharing my Beyond the Horizon Alternative Cards using the March 2022 Beyond the Horizon Paper Pumpkin. I loved this kit! It was perfect for all those masculine cards that you need to make. And I loved that it coordinated with the New Horizons Suite Collection!

I loved this Kit so much, that I created several alternative cards! I have gone into detail for my Mini Slimline Tri-Fold Window. At the end of this post, I have photos of all the other alternative cards with brief descriptions.

Details of My Mini Slimline Tri-Fold Window Card

For my first card, I decided to create a mini slimline Tri-Fold Window Card by combining the Paper Pumpkin Kit and the New Horizons Suite Collection. I thought it would be neat to see the beautiful water coloured scene peeking out of the windows between the mountain die cuts that came with the kit!

How to Cut the Card Base

The Misty Moonlight card base is 6” x 10.5” and scored at 3.5” and 7” along the long side to create 3 panels. I used the 2 largest retired Stitched Squares to create my windows for the scene. The largest Square on the outside panel and the next size down on the inside panel.

The Front Panel

Front of Tri-Fold Card

I cut apart 2 envelopes to use for my background pieces in Old Olive and Bumblebee. The Old Olive piece was on the front panel and the Bumblebee was on the right inside panel.

Tip: since the envelopes are thinner than card stock, you can glue them down and cut both the panel and the envelope at the same time.

The envelopes are printed on both sides. So, I was able to flip over leftover pieces where I needed another design such as the cross hatching on the front panel and the Misty Moonlight dotted piece. 

I used a small piece of the In Good Taste DSP for my fence to give it a wooden look. Don’t you just love the Pebbles Enamel Shapes! I couldn’t resist using them on three of my panels!

Close Up of Scene Through The Windows

The Right Inside Panel

I thought that the mountain dies that came in the Kit would be perfect to layer on the bottom of the Bumblebee window. Almost like you are looking through mountains at the scene.

Right Inside Panel

For this panel, I stamped the sentiment in Misty Moonlight onto a die cut Crumb Cake wood piece. Then I and layered it in front of a scrap of the dotted Misty Moonlight envelope.

Mountain Die Cuts with Scene

The Inside Panels

For the inside panels, I used leftover pieces of the envelopes under the windows and layered the leftover stitched squares on top.

For the left panel, I created a scene using the die cut trees from the Collection and the circle from the kit. Don’t you think the circle looks like a sun! I even used the trimmed top of the water-coloured piece for my sky behind the stitched square. I don’t throw anything out just in case I can use it.

Inside With All Panels Open

For the inside panel on the right, I used the sentiment from the floral stamp set that was the gift in the kit. I added some grasses and those pebbles again.

For the center piece, I added a Basic White mat to frame the water-coloured piece allowing an area to write.

Supplies:

Stamps/Bundles/Dies: New Horizons Suite Collection (157782)

Inks: Crumb Cake Classic Stampin’ Pad (147116), Misty Moonlight Spot (From Kit)

Paper: Misty Moonlight (153081), Basic White (159276), Old Olive (100702), In Good Taste Designer Series Paper (152494), New Horizons 6″ x 6″ Designer Series Paper (157768)

Accessories: 1/8″ Cotton Ribbon Combo Pack Paper (158140), Pebbles Enamel Shapes (158141), Retired Stitched Rectangles, Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

My Other Alternative Cards

Second Alternative Card

Second Alternative Card

This one of my alternative cards using the March Paper Pumpkin that I made for my Father-in-law’s birthday! It is based on the mini slimline design that they show on the back of the instruction sheet, but, of course, with a few tweaks from me.

I decided to use In Good Taste DSP for my fence to give it a wood texture. Since the card was for my FIL, I decided to use Old Olive card stock for the Time to Celebrate sentiment with the Lovely Labels Pick a Punch. A simple knot suited my FIL’s taste more than a bow. I used my Stampin’ Blends in Dark Old Olive and Dark Misty Moonlight to colour some rhinestones to match the New Horizons DSP.

Third Alternative Card

Third Alternative Card

I based this alternative on a mini slimline card, but I used the remainder of the New Horizon Designer Series Paper from the previous card. Since the DSP didn’t fill the background, I added a leftover piece of envelope behind the white embossed piece. I decided to use the Shaded Spruce die cut mountains that matched the jagged piece from the kit to create a base for my sentiment. For embellishments, I used the ribbon and the rhinestones from the Kit.

Fourth Alternative Card

Fourth Alternative Card

For this alternative, I decide to make a full A2 card using Misty Moonlight for the card base. I framed the scene with a Basic White frame, but if you were carefully with your trimming, you could use the card front with no frame. Then I add the wooden fence with die cut grass in front to balance the die cut mountains, circle and sentiment.

Fifth Alternative Card

Fifth Alternative Card

For my last alternative, I decided to cut apart one of the card fronts and added them to an Old Olive card base. I layered the sentiment on some leftover pieces from the Kit. I then added Misty Moonlight ribbon and rhinestones for my embellishments.

The Cards from the Kit

The Cards That the Kit Makes

More Information on my Beyond the Horizon Alternative Cards:

For more of my Stampin’ Up! cards, please click here.

To view my Paper Pumpkin Alternatives for other kits, please click here.

Happy St. Patrick’s Day Card

Happy St. Patrick’s Day Card
Happy St. Patrick’s Day Card

Hello Crafty Friends! Happy St. Patrick’s Day! Laurie here again! I am sharing my Happy St. Patrick’s Day Card using the Word Wishes Dies and the Give It A Whirl Dies by Stampin’ Up! 

The Details of My Card

For my card, I decided to use several dies to create a card to celebrate St. Patrick’s Day. My starting point was the beautiful Expressions in Ink Specialty Designer Series Paper. The piece of DSP I used had these beautiful swirls in Shaded Spruce and Pear Pizzazz with gold foiling. Perfect colours for St. Patrick’s Day! I decided to use the Picture This Dies so that the DSP can peek through. A layering of the sentiment in matching gold foil are staggered down the front of the card. Since, I didn’t have shamrock dies, I used the stitched hearts from the Give it a Whirl Dies to create them by placing them side by side. A scattering of Gilding Gems and Shaded Spruce Rhinestones add some sparkle to the card!

Supplies:

Stamps/Bundles/Dies: Word Wishes Dies (149629), Picture This Dies (155559), Give It a Whirl Dies (154336)

Paper: Pear Pizzazz (131201), Shaded Spruce (146981), Expressions in Ink Specialty Designer Series Paper (155464), Gold Foil Sheets (132622)

Accessories: Gilded Gems (152478), Holiday Rhinestone Basic Jewels (150457), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of Card with shamrocks on it
Close Up of Card

Measurements: 

  • Pear Pizzazz:
    • 5 ½” x 8 ½” scored a 4 ¼”
    • Hearts: Scraps
  • Shaded Spruce: 5 ¼” x 4”
  • Expressions in Ink Specialty Designer Series Paper: 5 1/8” x 3 7/8”
  • Gold Foil Sheets:
    • Happy: 2” x 1-1/8”
    • St. Patrick’s: 3-1/8” x 1-1/16”
    • Day: 1-3/16” x 15/16
    • Hearts: (4 pieces) 1” x 1-1/8”

More Information on my Happy St. Patrick’s Day Card:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Heartfelt Sunflower Wishes Card

A card with a Sunflower on it
Heartfelt Sunflower Wishes Card

Hello Crafty Friends! Laurie here again! I am sharing my Heartfelt Sunflower Wishes Card using the Celebrate Sunflowers Bundle by Stampin’ Up! This bundle is currently on sale for the March 2022 Savings Are in Bloom Sale. Check it out in my online store: https://www.stampinup.ca/products/celebrate-sunflowers-bundle-(english)?demoid=2103981.

The Details of My Card

For my card, I wanted to show my support for the Ukraine people. My heart bleeds for them and anyone who are affected by this war! So, I decided to create a sunflower card since it is their national flower. I also decided to use Bumblebee and Pacific Point as my card stock choices to reflect the colours of the Ukrainian flag. 

To highlight the sunflowers, I stamped in Pacific Point the sky stamp from the Oceanfront Stamp Set a couple of times on the Basic White card stock. I love how it peeks out from the top die cut sunflower! Once that was done, I layered my pieces. The sentiment was heat embossed with white embossing powder and punched out with the Lovely Labels Pick a Punch. A scattering of epoxy shapes represents the “tears of the people” in my mind.

I have created several cards with this bundle in the past. I will include links to the cards at the bottom of this post. There is even a quick video on YouTube explaining the advanced colouring technique I used on the sunflower.

Colouring Video of Sunflower
Colouring Video of Sunflower

Supplies:

Stamps/Bundles/Dies: Celebrate Sunflowers Bundle (154065), Oceanfront Stamp Set (157862), Lovely You Stamp Set (152525)

Inks: Tuxedo Black Memento Ink Pad (132708), VersaMark Ink (102283), Pacific Point Classic Stampin’ Pad (147098)

Paper: Pacific Point (111350), Bumblebee (153077), Basic White (159276), Old Olive (100702)

Accessories: Lovely Labels Pick a Punch (152883), Silver & Clear Epoxy Essentials (155567), Basics Embossing Powder (155554), Mango Melody Stampin’ Blends Combo Pack, Calypso Coral Stampin’ Blends Combo Pack (154881), Soft Suede Stampin’ Blends Combo Pack (154906), Stampin’ Blends Color Lifter (144608), Heat Tool (129053), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close Up of the Coloured Sunflower on the card
Close Up of Coloured Sunflower on Card

Measurements: 

  • Pacific Point: (2 pieces)
    • 5 ½” x 8 ½” scored a 4 ¼”
    • Scrap (sentiment)
  • Bumblebee: (2 pieces)
    • 5 1/8” x 3 7/8”
    • 3 5/16” x 3 ¼” (sunflower)
  • Old Olive: (3 pieces)
    • Scraps (leaves – 3 pieces)
  • Basic White: (2 pieces)     
    • 3 ¾” x 5”
    • 3 5/16” x 3 ¼” (sunflower)

More Information on my Heartfelt Sunflower Wishes Card:

For more of my Stampin’ Up! cards, please click here.

For the other items on sale, please click here.

For the Celebrate Sunflowers Bundle, please click here.

You will find the items listed above in my online store.

Let’s Celebrate You Card

Link to post: https://stampwithlaurie.com/lets-celebrate-you-card/

Video Tutorial: Flicking of Different Colours Technique

Let's Celebrate You Card
Let’s Celebrate You Card

My Congratulations Card

Link to post: https://stampwithlaurie.com/my-congratulations-card/

My Sunflower Congratulation Card
My Sunflower Congratulation Card

I’m sharing my card at the following challenges:

Color Hues-Special Double Challenge: Blue and Yellow
The Flower Challenge #66 Use Scraps

Flowering Fields Birthday Wishes Card

A Card with a Windmill on it
Flowering Fields Birthday Wishes Card

Hello Crafty Friends! Laurie here again! I am sharing my Flowering Fields Birthday Wishes Card using the Flowering Fields Stamp Set and the Windmill Fields Dies by Stampin’ Up!

The Details of My Card

For my card, I thought it would be fun to create a Centre-Step Card, so it looks like the windmill is popping out of the tulip fields. Of course, if you have a windmill, wouldn’t it be fun to make it interactive! So, I added one of the round brads through the blades and into the windmill base.

Tip – to keep the brad from showing from behind the windmill on the card, folded down the arms at angle.

Position of Brads on Back of Windmill
Position of Brads on Back of Windmill

The windmill was popped up with dimensionals to allow the back of the brad to have room. 

I love the beautiful Flowering Fields DSP and used it for the grass/sky piece behind the windmill and the tulip fields! I pulled the colours from the DSP for my sentiment and for the ribbon. A couple of the sweet butterflies balanced out the ribbon on the sentiment.

Supplies:

Stamps/Bundles/Dies: Flowering Tulips Stamp Set (157672), Windmill Fields Dies (157683)

Inks: Highland Heather Classic Stampin’ Pad (147103)

Paper: Pear Pizzazz (131201), Basic White (159276), Crumb Cake (120953), Soft Suede (115318), Flowering Fields 12″ x 12″ Designer Series Paper (157670)

Accessories: Brushed Brass Butterflies (158136), Fresh Freesia Open Weave Ribbon (155615), Round & Square Brads (155570), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Close of Up the Windmill
Close of Up the Windmill

Measurements: 

  • Pear Pizzazz: 11” x 4 ¼” (see template)
  • Soft Suede: 2 ½” x 1 7/8”
  • Crumb Cake: 2 ½” x 1 7/8”
  • Basic White: 
    • 4” x 3” (Windmill Blades)
    • 4” x 7/8” (Sentiment)
    • Scraps (Clouds)
  • Flowering Fields Designer Series Paper:
    • 2 pieces: 4 ¼” x ¾”
    • 2” x 4 ½”
Side View of Centre-Step card
Side View of Centre-Step Card

More Information on my Flowering Fields Birthday Wishes Card:

For more of my Stampin’ Up! cards, please click here.

To download a PDF of the Centre-Step Template, please click here or on the picture.

Centre-Step Card Template
Centre-Step Card Template

For a Stampin’ Up! video on the Flowering Fields Suite, please click here.

You will find the items listed above in my online store.