My Santorini Window Card

My Welcoming Window Card
My Santorini Window Card

Today I am sharing my Santorini Window Card using the Welcoming Window Bundle by Stampin’ Up! I love that you can make different cards depending on which sentiment you use. This one is a birthday card, but I also made a Mother’s Day card for my mom too.

When I saw this bundle, I immediately thought of creating a window that shows the inside of the card. I went with bright colours that were inspired by a photo from our Greece trip to Santorini with the bright pink bougainvillea flowers against a white building. 

Santorini
Pink Bougainvillea Flowers in Santorini

I stamped directly onto the In Good Taste Designer Series Paper that carried over to the new Annual Catalogue. The white stucco sheet of DSP was perfect for my card. The shutters and window frame just had to be in Pacific Point since that colour reminds me of Santorini! To create my window, I used a piece of wind sheet between the window panes. I even used the part of the DSP that I cut of the window on the inside of my card. Then you would not see the glue that I used to adhere the Pacific Point frame on the front.

Inside of my Birthday Card
Inside of my Birthday Card

For the inside, I stamped my images centred on the page so that I can be seen through the window.

Inside of My Card
Inside of My Mother’s Day Card

Supplies:

Stamps/Bundles/Dies: Welcoming Window Bundle (159529)

Inks: Melon Mambo Classic Stampin’ Pad (147051), Pacific Point Classic Stampin’ Pad (147098), Pear Pizzazz Classic Stampin’ Pad (147104)

Paper: Melon Mambo (115320), Pacific Point (111350), Pear Pizzazz (131201), Basic White (159276), In Good Taste Designer Series Paper (152494)

Accessories: Window Sheets (142314), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Multipurpose Liquid Glue (110755)

Close Up of My Welcoming Window Card
Close Up of My Welcoming Window Card

Measurements: 

  • Melon Mambo: 5 ½” x 8 ½” scored at 4 ¼”
  • In Good Taste Designer Series Paper: 4” x 5 ¼”
  • Basic White: 4” x 5 ¼” (inside of card)
    • 1 1/8” x 1 ½” (for flowers)
    • Scraps (for hinges)
  • Pacific Point: 1 5/8” x 2 3/8” (window)
    • 1 9/16” x 2 3/8” (shutters)
  • Pear Pizzazz: 5/8” and 2 ¼”
  • Window Sheets: 2” x 3”

For Further Info:

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Stack of Sweet Wishes Card

My Design Team Card for Copic for Alle
My Stack of Sweet Wishes Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Stack of Sweet Wishes Card as my Guest Design Team Card for Copic for ALLE. I was so excited to be asked to be on their GDT again for the month of May. Their Color Challenge for May is using E (Earth Tone) Copic markers. I use Es in so much of my colouring. They really are a staple for me!

For my card, I pulled out Swiss Pixie Cupcake Birgitta by C.C. Designs Rubber Stamps. A friend, Nathalie, asked me to show her some colouring techniques and I thought this image would be a good one for us to colour together.

I showed her skin blending using E Copic Markers (E000/00/21/11/04/R20). Here is a collage of the skin colouring steps:

Skin Colouring with Copic Markers
Skin Colouring with Copic Markers

Next we worked on her hair using E Copic Markers (E18/E15/E13/E11). This is the collage for the step to colour the hair:

Hair Colouring with Copic Markers
Hair Colouring with Copic Markers

For my card, I created a mini slimline card for my sweet Birgitta! Since she is sitting, I placed her on a cake pedestal. I thought it would be a fun way to show her off. I use Galvanized Metallic paper for the pedestal. The flag banners were cut from the DSP so that they would match the other elements. A scattering of sequins adds some birthday festiveness to the card!

————————–

Copic Markers:

Skin: E000/00/21/11/04/R20
Hair: E18/E15/E13/E11
Wings: BG10/0/ Clear Wink of Stella
Dress: BG15/BG13/BG11/BG10
Orange: Y359/Y38/E15/E18
Shoes/Cupcake Wrappers: E35/E33/E31/E30
Cherry: E24/E27/E29/Glossy Accents

Close up of My Stack of My Design Team Card
Close up of My Stack of Sweet Wishes Card

————————–

Card Recipe for My Stack of Sweet Wishes Card:

Swiss Pixie Cupcake Birgitta, C.C. Designs Rubber Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Cupcake and Carousels Design Series Paper Stack, Stampin’ Up!
Flag Banner Dies, From my Stash
Stitched So Sweetly Dies Stampin’ Up!
Hello Cupcake Stamp Set, Stampin’ Up!
Call Me Cupcakes Framelits, Stampin’ Up!
Artistry Blooms Adhesive-Backed Sequins, Stampin’ Up!
Galvanized Metallic Paper, Stampin’ Up!
Glossy Accents, Ranger
Clear Wink of Stella
Calypso Coral, Peekaboo Peach and Whisper White Card Stock, Stampin’ Up!

Finished card size: 3.5” x 6”

————————–

To view my other Copic Marker cards, please click here.

Hope you like my Guest Design Team Card for Copic for ALLE!

If you wish to join in their Challenge, here is a link to it:
https://www.facebook.com/media/set/?set=oa.737302593747392&type=3

Thank you for stopping by!

Hugs,
Laurie

Happy Birthday Card

Birthday Card
My Happy Birthday Card

Hello Crafty Friends! It’s Laurie here with my Happy Birthday Card using the stamp called ‘Birthday Mouse’ Digital Stamp by Rachelle Anne Miller Creative Studios. Everyone needs birthday card and this one is perfect for a little boy!

I decided to try my hand at making a Clean and Simple Card and let the image take centre stage for my card. I used my Copic markers to colour the stamp in oranges, blues, greens and yellows that I pulled from the Doodlebug Paper Pad. A great colour scheme for a little boy! I have been wanting to use the Stitched Whimsy Dies for a while and thought they would add a touch of whimsy to my card. The sentiment comes with the stamp, but I decided that I wanted to pop it up and added a bit of colour behind it with a piece of die cut paper from the paper pad. A scattering of sequins, Clear Wink of Stella on the star and dots and White Gelly Roll pen dots on the balloons finish my card off.

————————–

Copic Markers:

Mouse: E30/E31/E33/E35/R20
Cake: E30/E31/E33/E35
Cake Icing: B04/B02/B01/B00/YG25/YR04
Greens: YG11/YG23/YG25
Yellows: Y11/Y13/Y15
Pinks: RV55/RV02/RV00
Yellows
: Y00/Y15
Oranges: YR01/YR02/YR04
Plate: C5/C3/C1

Close Up of My Card
Close Up of My Design Team Card

————————–

Card Recipe for My Happy Birthday Card:

‘Birthday Mouse’ Digital Stamp, Rachelle Anne Miller Creative
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Party Time 6” x 6” Paper Pad, Doodlebug Design Inc.
Stitched with Whimsy Dies, Stampin’ Up!
Stitched Rectangle Dies, Stampin’ Up!
Project Life Cards and Labels Framelits Dies, Stampin’ Up!
Artistry Bloom Adhesive-Backed Sequins, Stampin’ Up!
Basic Adhesive-Backed Sequins, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!
White Gelly Roll Pen
Blueberry Bushel Card Stock, Stampin’ Up!

Finished card size: 4.25” x 5.5”

————————–

To view my other Rachelle Anne Miller Creative Studios cards, please click here.

Hope you like my Design Team Card using ‘Birthday Mouse’ Digital Stamp!
Thank you for stopping by!

Hugs,
Laurie

My Super Birthday Cards

My Super Birthday Cards
My Super Birthday Cards

Hello Crafty Friends! Yesterday was a little boy’s birthday and a few weeks ago was a big boy’s birthday. The big boy collects comics especially Superman and the little boy sent me a card with a Superman stamp on the envelope. So, I pulled out my Save The Day Grab and Go Box by Stamp Anniething to make My Super Birthday Cards.

The Details of My Cards

I love that this Grab and Go Box has everything you need to make your card including paper, adhesive, card bases and more! I stamped my super heroes twice and used my Copic Markers to colour them. Then I die cut them out using the matching die included in the box.

My Super Birthday Card - Version 1
My Super Birthday Card – Version 1

My cards were quick ones to make since I mainly used the Save the Day paper sheets and the Comic Mat Die that come with the box. For one card, I pulled out the Background Scene Stencil and did some inking directly onto the white panel that was cut out from the Comic Mat Die. Next, I stamped the sentiment in black and just placed it back into the empty slot on the mat. The other panels were filled with different papers. I love the “Suddenly” just like in the old comics! I stamped the Whoosh!, coloured them with my Copic markers and then added Glossy Accents to make them pop. A few sequins add to the sparkle of the card.

My Super Birthday Card - Version 2
My Super Birthday Card – Version 2

For my other card, I decided to use the “POW” from the paper since the big birthday boy would get a kick out of it from the old TV shows that we use to watch.

One final piece was that I put my super heroes onto Action Wobbles. How fun is that! The recipient can have them wobble on the card! Check it out!

Video of Wobble in Action
Video of Wobble in Action

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: C9/C7/C5/C3
Blues: B18/B26/B24
Reds: R39/R37/R35
Yellows: Y32/Y38

Close Up of My Card
Close Up of My Card

————————–

Card Recipe for My Super Birthday Cards:

Save The Day Grab and Go Box, Stamp Anniething
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
#1 Stamp, Save The Day Grab and Go Box, Stamp Anniething
#7 Stamp, Save The Day Grab and Go Box, Stamp Anniething
#8 Stamp, Save The Day Grab and Go Box, Stamp Anniething
Metal Die Outlines, Save The Day Grab and Go Box, Stamp Anniething
6” x 6” Paper Sheets, Save The Day Grab and Go Box, Stamp Anniething
Comic Mat Die, Save The Day Grab and Go Box, Stamp Anniething
Background Scene Stencil, Save The Day Grab and Go Box, Stamp Anniething
Tuxedo Black Memento Ink Pad, Stampin’ Up!
Pacific Point, Stampin’ Up!
Blending Brushed, Stampin’ Up!
Action Wobbles, My Stash
Metallic Sequin Assortments, Stampin’ Up!
Glossy Accents, Ranger
Thick Whisper White Card Stock, Stampin’ Up!

Finished card size: 5.5” x 5.5”

————————–

To view my Copic cards, please click here.

Hope you like My Super Birthday Cards using the
Save The Day Grab and Go Box from Stamp Anniething!

Thank you for stopping by!

Hugs,
Laurie

Soar Confidently Birthday Card

Birthday Card
Soar Confidently Birthday Card

Today is I am sharing my Soar Confidently Birthday Card that I made for my father-in-law’s birthday that was yesterday using the Soar Confidently Stamp Set. My father-in-law loves planes, and I knew that a card with the plane from this set would be perfect for him! I just happened to decide to use all the images, as well as the plane.

The Details of My Card

Since the images look vintage, I decided to create an old world feel to my card. So, once I stamped my images on Very Vanilla card stock, I used my Blender Pen to “colour” the stamped images in certain areas where the line art was the strongest. I then fussy cut the stamped images out with my Paper Snips. To give my card more of a vintage feel I sponged ink along the edges. I usually don’t mix Very Vanilla and Basic White but thought the vintage look I was going for allowed it to work.

I decided to use the World of Good Designer Series Paper since it is perfect for a masculine card! Specifically, the one with the compasses on the Misty Moonlight background which reminded me of a blue sky. This paper is retiring and is currently on sale!

For my card, I wanted all the different flying machines to be in the air. So, I need some clouds which is where the Mountain Air Bundle came into effect. I stamped them in Misty Moonlight, but stamped off twice before stamping them on the Basic White card stock to give them a soft fluffy look.

I stamped the sentiment in a Stitched Rectangle, add a couple of banners with one in copper foil to match the copper stars from the Star Designer Elements.

Supplies:

Stamps/Bundles/Dies: Soar Confidently Stamp Set (154531), Mountain Air Bundle (153820), Stitched Rectangles Dies (151820), Tasteful Labels Dies (152886)

Inks: Misty Moonlight Classic Stampin’ Pad (153118), Early Espresso Classic Stampin’ Pad (147114)

Paper: Early Espresso (119686), Very Vanilla (101650), Basic White (159276), World of Good Designer Series Paper (152491), Copper Foil Sheets (142020)

Accessories: Star Designer Elements (150430), Blender Pens (102845), Stamping Sponges (141337), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Glue Dots (103683)

Close Up of my Card
Close Up of My Soar Confidently Birthday Card

Measurements: 

  • Early Espresso: 5 ½” x 8 ½” scored at 4 ¼”
    • ½” x 2 3/16” (banner)
  • World of Good Designer Series Paper: 5 ¼” x 4”
  • Basic White: 5 ¼” x 4” (inside piece)
    • 3 pieces: 1 7/8” x 5/8” (for clouds)
    • 1” x 2 3/8” (sentiment)
  • Very Vanilla: 3 ½” x 4 ½”
  • Copper Foil Sheets: ½” x 2 3/16” (banner)

For Further Info:

Hope you like my Soaring Confidently Birthday Card.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Fine Art Birthday Card

My Fine Art Birthday Card
My Fine Art Birthday Card

Today is I am sharing my Fine Art Birthday Card using the Fine Art Floral Suite Collection by Stampin’ Up! I love this collection with the lovely flowers and textures on a modern take on classic impasto paintings. Rich textures, lovely florals, gold leafing, and more all work together for a fine art experience that is sure to yield beautiful and elegant results.

The Art Gallery Photopolymer Stamp Set is so pretty with lots of lovely sentiments for all kinds of cards! And you can’t go wrong with the matching Floral Gallery Dies.

How to Use Gilded Leafing Embellishment

When I saw the Gilded Leafing Embellishment in the new mini, I was so excited! It was on the top of my list to buy. I have used similar products and just loved them. So, I knew I would love the Stampin’ Up! version.

For my card, I took the VersaMark Ink Pad and rubbed it on opposite corners of the DSP and the Mossy Meadow card stock (which was embossed first with the Painted Texture 3D Embossing Folder). I then sprinkled Heat & Stick Powder to the ink and set it with my heat tool. It will melt like embossing powder but leaves a sticky residue behind to which you can adhere the Gold Gilding. I then burnished with my fingers the Gold Gilding removing the excess.

Imagine an artist, delicately painting individual canvases in a classic impasto style. It’s beautiful, isn’t it? That’s exactly what this paper is! A Stampin’ Up! artist hand-paint canvases with beautiful florals and textures in classic Stampin’ Up! colors. They then took those canvases, photographed them, and made them into this unique designer series paper. Your heart will grow wild when you get this paper in your hands. The pack includes florals, patterns, colour variance, and all the touches of professional paintings.

To finish my card, I added a strip of the gorgeous Golden Garden Designer Specialty Acetate behind the Fine Art Ribbon and the sentiment. A scattering of Gold Glitter Enamel Dots tie in the golden theme.

Supplies:

Stamps/Bundles/Dies: Art Gallery Bundle (156227)

Inks: Bumblebee Classic Stampin’ Pad (153116), Mossy Meadow Classic Stampin’ Pad (147111), VersaMark Ink Pad (102283

Paper: Bumblebee (153077), Mossy Meadow (133676), Basic White (159276), Golden Garden Designer Specialty Acetate (154557), Fine Art Floral Designer Series Paper (154558)

Accessories: Painted Texture 3D Embossing Folder (154317), 3/8″ Fine Art Ribbon (154561), Heat & Stick Powder (156110), Gilded Leafing Embellishment (154560), Gold Glitter Enamel Dots (152155), Heat Tool (129053 ), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Glue Dots (103683)

Close Up of My Fine Art Birthday Card
Close Up of My Fine Art Birthday Card

Measurements: 

  • Bumblebee: 5 ½” x 8 ½” scored at 4 ¼”
  • Mossy Meadow: 3 ¼” x 4 ½”
  • Basic White: ½” x 2 ¾”
  • Fine Art Floral Designer Series Paper: 3” x 4 ¼”
  • Golden Garden Designer Specialty Acetate: 1” and 3 ¾”
  • Fine Art Ribbon: 3 ½”

For Further Info:

Hope you like my Fine Art Birthday Card.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Level Up Birthday Card

My Level Up Birthday Card
My Level Up Birthday Card

Hello Crafty Friends! It’s Laurie here sharing my Level Up Birthday Card for the Design Team of Paper Nest Dolls using Build Your Own Nest (Gamers). It comes with 3 digital images including a gamer boy, a gamer girl and a game console/games. 

This set of digital stamps is perfect to create your own “room” using the Build Your Own Nest (Family Room). For my card, I decided that I wanted to highlight these cute gamers and their game box and games. So, I created a slim line card just for them.

I coloured them with my Copic markers in bright primary colours to match the paper that I picked. The Saved the Day paper has comic book noises like splat, boom, bam, etc. which I thought was perfect noises for video games, especially if they are playing super heroes! The game controller dies from My Favorite Things definitely had to be added to my card. I added glossy accents to the buttons on my controller to give them dimension. I had such a hard time choosing the sentiment for my card but decided on Level Up (Happy Birthday). Such a great sentiment for my card!

————————–

Copic Markers:

Girl Gamer
Skin: E000/00/21/11/04/R20
Hair: E29/E27/E25/E23/E21
Shirt: R39/R37/R35/R32
Leggings: YG03/YG63/YG67/G99
Ear Phones: C9/C7/C6/C5/R39/R37/R35
Mic: C1/C3/C5
Game Controller: C9/C7/C6/C5/B24/B26/YG03/YG67/Y15/Y38
Games: B18/B26/B24/R37/R35/R32

Girl Gamer

Boy Gamer
Skin: E000/00/21/11/04/R20
Hair: E57/E43/E55/E53/E50
Shirt: B18/B26/B24
Shorts: R39/R37/R35/R32
Ear Phones: C9/C7/C6/C5/B18/B26/B24
Mic: C1/C3/C5
Game Controller: C9/C7/C6/C5/B24/B26/YG03/YG67/Y15/Y38
Game Box: C9/C7/C6/C5/C4/C3/C1

Boy Gamer

————————–

Card Recipe for Level Up Birthday Card:

Build Your Own Nest (Gamers), Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Saved the Day Paper Pad, Stamp Anniething
Level Up Stamp Set, My Favorite Things
Game Controller Die-namics, My Favorite Things
Large Slimline with Sliders Dies, Lawn Fawn
Stitched Rectangle Dies, Stampin’ Up!
Onyx Black, VersaFine Instant Dry Pigment Ink, Tsukineko 
Glossy Accents
Pacific Point, Basic Black, Real Red, Granny Apple Green
and Daffodil Delight Card Stock, Stampin’ Up!

Finished card size: 3.5” x 8.5”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Level Up Birthday Card using Build Your Own Nest (Gamers) by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

My Sweet Birthday Card

My Sweet Birthday Card
My Sweet Birthday Card

Today is I am sharing My Sweet Birthday Card that I made for a swap using the Sweet Strawberry Bundle and the Sale-a-Bration Berry Bliss Bundle. There is only a few more day left of the Jan-Feb 2021 Sale-a-Bration and you can get the Berry Bliss Bundle for free with a qualifying $120 order.

I love how these two bundles coordinate with their berry sweet theme! The Berry Delightful Designer Series Paper is so pretty with its fresh and juicy paper designs. Both stamp sets are Distinktive and consist of two-step stamping to give you texture and dimension to your images.

Who doesn’t love a coordinating punch and what is better than the Strawberry Builder Punch! I even punched out a coordinating Granny Apple Green stem to top my strawberry.

I wanted to create a country theme by using the Pinewood Planks 3D Embossing Folder and the Denim Ribbon. The Stitched Oval also adds to my theme. The plaid DSP reminded me of a table cloth that has been laid on the ground to enjoy your picnic of berries. A couple of Red Rhinestones are the finishing touch and add a bit of sparkle to the card.

I had so much fun with my card that I ended up making 3 versions all with different sentiments.

Three Variations of my Card
Three Variations of my Card

Supplies:

Stamps/Bundles/Dies: Sweet Strawberry Bundle (156214), Berry Blessings Bundle (157613)

Inks: Crumb Cake Classic Stampin’ Pad (147116), Poppy Parade Classic Stampin’ Pad (147050), Pacific Point Classic Stampin’ Pad (147098), Granny Apple Green Classic Stampin’ Pad (147095)

Paper: Poppy Parade (119793), Crumb Cake (120953), Basic White (159276), Granny Apple Green (146990), Berry Delightful Designer Series Paper (157613)

Accessories: Pinewood Planks 3D Embossing Folder (152320), 3/8″ Denim Ribbon (149590), Stitched Shapes Dies (152323), Red Rhinestone Basic Jewels (146924), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Glue Dots (103683)

Close Up of One of My Cards
Close Up of One of My Cards

Measurements: 

  • Poppy Parade: 5 ½” x 8 ½” scored at 4 ¼”
  • Crumb Cake: 5 ¼” x 4”
  • Basic White: 5 ¼” x 1 ½”
  • Granny Apple Green: 5 ¼” x 1 5/8” and scrap
  • Berry Delightful Designer Series Paper: 5 ¼” x 2 5/16”
  • Denim Ribbon: 2 pieces at 6” and 4”

For Further Info:

Hope you like My Sweet Birthday Card.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

My Birthday Cutie Card

My Birthday Cutie Card
My Birthday Cutie Card

Hello Crafty Friends! It’s Laurie here with My Birthday Cutie Card. This is the second card that I have created using the new released clear stamps by My Favorite Things who have teamed up with Rachelle Anne Miller Creative Studios! This card is using Birthday Cutie. There are also matching RAM Birthday Cutie Die-namics! Love that you can now stamp and die cut your favourite RAM stamps!

————————–

Copic Markers:

Skin: E000/00/21/11/04/R20
Hair: E30/E31/E33/E35/E37
Dress: RV11/RV32/RV34/E04/White Gelly Roll Pen
Balloon: RV11/RV32/RV34/White Gelly Roll Pen/Glossy Accents
Sweater/Leggings: YG039/YG639/YG67
Grass: G039/YG639/YG67/G99
Cat Blankie: W3/W1/W0/R20

Close Up of My Birthday Cutie Card
Close Up of My Card

————————–

Card Recipe for My Birthday Cutie Card:

Birthday Cutie, My Favorite Things, Rachelle Anne Miller Creative
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Tuxedo Black Ink Pad, Memento
Birthday Memories Designer Series Paper, Stampin’ Up!
Cloud Stencil, C.C. Designs
Flat Bottom Clouds Die-namics, My Favorite Things
Stitched Rectangle Dies, Stampin’ Up!
Balloon Bouquet Punch, Stampin’ Up!
Resin Hearts Embellishments, Stampin’ Up!
Crushed Curry Baker’s Twine, Stampin’ Up!
Soft Sky Classic Stampin’ Pad, Stampin’ Up!
Blender Brushes, Picket Fence
White Gelly Roll Pen, Sakura
Glossy Accents, Ranger
Daffodil Delight, Granny Apple Green and
Primrose Petals Card Stock, Stampin’ Up!

Finished card size: 5.5” x 4.25”

————————–

To view my other card that I made using the You’re My Jam Clear Stamp from My Favourite Things and Rachelle Anne Miller Creative Studios, please click here.

Hope you like my Card!
Thank you for stopping by!

Hugs,
Laurie

Time to Celebrate Card

Time to Celebrate Card

Hello Crafty Friends! It’s Laurie here with my Time to Celebrate Card. This card is special since it’s the start of something wonderful! Rachelle Anne Miller Creative Studios and My Favorite Things are teaming up to bring clear stamps and dies to you! How exciting! My card is using the stamp set called You’re My Jam. I think it is awesome that you can now get dies to cut out your favourite Rachelle Anne Miller stamps! And I love the sentiments that come with it: “Grab the cymbals, It’s time to celebrate”, “We rock”, “You’re my jam”, “I can’t wait to get the band back together” and “ Thank you for playing my part when I couldn’t”. There are so many uses for this stamp set!

————————–

Copic Markers:

Teddy: E35/E33/E31/E30/R20
Drum: B24/B26/B18/R35/R37/R39
Bird: Y11/Y15/Y19/YR04
Bunny: C5/C4/C3/C1/R20/E25/E23
Turtle: YG17/YG23/G29/R20
Hat: R39/R35/RB18/B24
Squirrel: E21/E23/E25/E29/R20
Hedgehog: E21/E11/R20/E29/E25/E23
Flag: R39/R35/RB18/B2

Close Up of Card Using You’re My Jam

————————–

Card Recipe for My Time to Celebrate Card:

You’re My Jam, My Favorite Things, Rachelle Anne Miller Creative
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
In Good Taste Designer Series Paper, Stampin’ Up!
Picket Fence Die-namics, My Favorite Things
Lawn Fawn Spring Showers Dies
Musical Notes Die
Freezin’ Friends Dies, Stampin’ Up!
Krafty Scenery Stencil, Kraftin’ Kimmie Stamps
Balmy Blue Classic Stampin’ Pad, Stampin’ Up!
Blender Brushes, Picket Fence
Clear Star Gelly Roll Pen
Real Red, Pacific Point, Granny Apple Green, Daffodil Delight and Basic Black Card Stock, Stampin’ Up!

Finished card size: 5.75” x 5.75”

————————–

To view my other Rachelle Anne Miller Creative Studios cards, please click here.

Hope you like my Time To Celebrate Card using You’re My Jam!
Thank you for stopping by!

Hugs,
Laurie

Toss A Coin Birthday Card

My Toss A Coin Card
My Birthday Card

Hello Crafty Friends! It’s Laurie here to share my Toss A Coin Birthday Card! Today is a good friend’s birthday and I thought the bard from the Monster Hunter Stamp Set by Kindred Stamps would be perfect for him! He is the best bard role player ever! Plus loves the Witcher TV show!

I coloured the whole Monster gang with my Copic markers for a colouring challenge a while ago. But I knew that I wanted to give Jonathan the bard guy for his birthday. I love the sentiment “Toss a coin for your birthday”! The Enchanted Forest Graphic 45 Paper gave my card the fantasy feel that I was looking for, and of course, you have to have music paper and notes for a bard!

Now, I just need to get the other characters onto a card as well!

————————–

Copic Markers:

Bard (Jaskier)
Skin: E000/E000/E00
Hair: E30/E31/E33/E35/E37
Outfit: W3/W1/W0
Lute/Boots: E31/E35/E37
Coin: Y17/Y19/Y28

Close up of My Toss A Coin Card
Close up of My Birthday Card

Mercenary (Geralt of Rivia)
Skin: E000/E000/E00
Hair: C2/C1/0
Outfit: C9/C7/C5/C4/C3
Eyes: E04/RV34/RV32/Y00

Witch (Yennefer)
Skin: E000/E000/E00/RV34
Hair/Outfit: C9/C7/C5/C4

The Gang from The Monster Hunter Stamp Set
The Gang from The Monster Hunter Stamp Set

Girl (Ciri)
Skin: E000/E000/E00
Hair: E99/YR24/YR23
Boots/Gloves/Dress: E37/E35/E31
Cloak: B12/B14/B16/B18

————————–

Card Recipe for My Toss A Coin Birthday Card:

Monster Hunter Stamp Set, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Tuxedo Black Memento Ink
Enchanted Forest 8” x 8” Paper Pack, Graphic 45
Vintage Essentials 12” x 12” Paper Stack, DCWV Inc.
Layering Circle Dies, Stampin’ Up!
Project Life Cards and Labels Framelits Dies, Stampin’ Up!
Music Notes Die
Cherry Cobbler and Whisper White Card Stock, Stampin’ Up!

Finished card size: 4.25” x 5.5”

————————–

To view my other Copic cards, please click here.

Hope you like my Toss A Coin Birthday Card using the Monster Hunter Stamp Set by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

Happy Birthday to Me!

Happy Birthday to Me! Card
Happy Birthday to Me! Card

Today is my birthday! So I thought I would share my Happy Birthday to Me Card celebrating me and my friend, Sheina, who’s birthday is today as well! Happy Birthday Sheina!

I recently attended a Virtual Stampin’ Up! Christmas Party that was put on by our team leader. The party was delayed until January since Covid was affecting delivery schedules. For this party, we were we given a package of products including a Pool Party card base, Basic Black Card Stock, Basic White Card Stock, a piece of True Love Designer Series Paper, a Square Vellum Doily and Pool Party Sheer Ribbon to create a mystery card. We could use these supplies anyway we liked to create something to share with the group. We could also add any additional supplies to the card that we wished.

Package of Products
Package of Products

My Additional Supplies

So, I added the Dainty Diamonds 3D Embossing Folder, Pool Party Ink, VersaMark Ink, White Embossing Powder, Basic Black Card Stock and Rhinestone Basic Jewels to create my final card.

I love the very elegant black/white True Love DSP with the floral motif on one side and geometrics on the other. There are so many ways to add colour to it. You could colour it with the Stampin’ Blends, the Stampin’ Write Markers, sponges or daubers. I chose to add Pool Party Ink using the new Blending Brushes.

I then trimmed it into 3 equal pieces and added it to the Basic Black mat. Once the sentiment was heat set on the Basic Black card stock, I added a trimmed down edge of the Square Doily so that it peeks out. I tied the pretty Pool Party Shimmer Ribbon around my focal point and popped it up with dimensionals. I added a scattering of Rhinestone Basic Jewels to add some shimmer.

Supplies:

Stamps/Bundles/Dies: Itty Bitty Greetings Stamp Set (151331

Inks: VersaMark Ink (102283), Pool Party Classic Stampin’ Pad (147107)

Paper: Pool Party (122924), Basic White (159276), Basic Black (121045), True Love Designer Series Paper (154281)

Accessories: Dainty Diamonds 3D Embossing Folder (152702), Blending Brushes (153611), Pool Party 3/8” Sheer Ribbon(152462), White Stampin’ Emboss Powder (109132), Heat Tool (129053), Square Vellum Doilies (152484), Rhinestone Basic Jewels (144220), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Glue Dots (103683)

Close Up of Happy Birthday to Me! Card
Close Up of Happy Birthday to Me! Card

Measurements: 

  • Pool Party: 5 ½” x 8 ½” scored at 4 ¼”
  • Basic Black: 3 pieces
    •  5 1/8” x 3 7/8”
    • 2 7/8” x 4”
    • 3” x ½”
  • Basic White: 3 ¾” x 5”
  • True Love Designer Series Paper: 1 piece 3 ¾” x 2 ¾” then trimmed into 3 pieces at 1 ¼” x 2 ¾”

For Further Info:

Hope you like my Happy Birthday to Me! Card.

If you would like see more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store

Our Friendship is Tweet

Our Friendship is Tweet Card
Our Friendship is Tweet Card

It’s Laurie here with Our Friendship is Tweet Card for Rachelle Anne Miller Creative Studios using her cute ‘Tweet Friendship’ Christmas Digital Stamp. I have been a big fan of Rachelle Anne Miller’s for a long time. In fact, I used my rubber stamp that was in my stash to create my card, but you can get the digital version in her store.

I love this sweet little girl with her tweet friends! I though she made a perfect card for a winter birthday and I have a lot of them coming up in January and February. So I have plans for her!

For my card, I coloured her with my favourite BG and YG colour combinations of Copic markers. I then created a frame by laying down the die that I used to cut her out and sponged Pool Party Ink with my new Blending Brush from Stampin’ Up! When I lifted the die up, I was left with a white frame to set off my image. I love the Frostyville Wreath in the Sparkle Glimmer Paper, but it was too small for my image. So, I cut it apart and draped it along the frame. To balance the “wreath” of snowflakes, I placed another larger snowflake opposite them. I thought that the Metallic Mesh Ribbon looked like cracked ice creating a subtle texture to the card. A scattering of Adhesive-backed Snowflakes added to the Winter Wonderland theme of my card.

————————–

Copic Markers:

Skin: E000/E00 /E11/E13/R20
Hair: E99/YR24/YR23
Coat/Tights: BG73/BG/75/BG78/YG93/YG95/E57
Birds: E55/BG11/BG13

Close Up of My Design Team Card
Close Up of My Design Team Card For Rachelle Anne Miller Creative Studios

————————–

Card Recipe for Our Friendship is Tweet Card:

Rachelle Anne Miller Creative Studios, ‘Tweet Friendship’ Christmas Digital Stamp
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Timbergrove 6” x 6” Paper Pad, Fancy Pants Designs
Adhesive CORK Paper, Karen Foster Designs
Snow Day Collection, Bo Bunny
Sparkle Glimmer Paper, Stampin’ Up!
Standard Circle Dies, Sizzix
Classic Scallop Dies, Sizzix 
Frostyville Wreath, Memory Box
Seasonal Layer Dies, Stampin’ Up!
Adhesive-Backed Snowflakes, Stampin’ Up!
Rhinestone Basic Jewels, Stampin’ Up!
Metallic Mesh Ribbon, Stampin’ Up!
Stardust Stickles
Clear Star Gelly Roll Pen
Blending Brushes, Stampin’ Up!
Pool Party and Old Olive Card Stock

Finished card size: 6” x 6”

————————–

To view my other Rachelle Anne Miller Creative Studios cards, please click here.

Hope you like Our Friendship is Tweet Card with ‘Tweet Friendship’ Christmas Digital Stamp by Rachelle Anne Miller Creative Studios!
Thank you for stopping by!

Hugs,
Laurie

Have A Spooktacular Birthday Card

My Have a Spooktacular Birthday Card
My Have a Spooktacular Birthday Card

Hello Crafty Friends! It’s Laurie here with my Have a Spooktacular Birthday Card. Today is my Hubby’s birthday! He’s been hinting at a Scooby Doo card since I made one for my brother back in May (I have posted it at the end) or a Halloween card. So, I made him both! I coloured with my Copic markers the Teen Detectives from Kindred Stamps for the 30 Day Coloring Challenge in June in anticipation of this card. My card is a slimline card since they are all the rage right now.

Instructions for
Have a Spooktacular Birthday Card

I had a ton of fun creating the spooky graveyard scene with lots of sponging and masking! The moon and the ground were masked while sponging Rich Razzleberry around the moon, Night of Navy for the sky and Memento at the edges of the sky. Next, I sponged the ground in Old Olive. Since it is a lighter colour then Night of Navy, I didn’t have to bother masking the sky. I added some hills by using the same masks and lightly sponging some black ink on different angles. Once I removed the masks, I stamped the grave stones and bats in black ink.

My Have a Spooktacular Birthday Card
My Have a Spooktacular Birthday Card with Shaggy and Scooby Running Away

I added a slider mechanism for Shaggy and Scooby since they are always running away from the scary monsters in the series! LOL! And in this case, it is the cute ghosts that are immerging from the graveyard! The Large Slimline with Sliders Dies comes with sliders, but I found that they were too long for what I wanted. So, I created my own using the retired Classic Label Punch by Stampin’ Up! I punched one and a half times overlapping in the area I wanted the slider to be. I used some pennies and dimensionals to create my sliders.

A die cut spooky fence, tree and spider with Shimmery Crystal Effects to make it glitter add to the Spooktacular scene!

————————–

Copic Markers:

Fred
Skin: E000/E00/E21/E11/E04
Hair: YR24/Y35/Y13/Y11/Y00
Scarf: YR09/YR16/Y17
Shoes: E50/E53/E55
Pants/ shirt collar: B18, B26, B24, B12, B41 
Sweater: C0/C1/0

Velma
Skin: E000/E00/E21/E11/E04/R20
Hair: E57/E37/E08/E15/YR27
Skirt: E37/E08/E15
Shirt: E57/E15/YR27
Magnifier: W4/0

Close Up of Fred and Velma

Shaggy
Skin: E50/E51/E53
Hair: E57/E25/E99/YR27/YR24
Shirt: G07/YG09/YG06
Pants: E37/E08,/E15
Shoes: W8/W6/W4

Daphne
Skin: E50/E51/E53/R20
Lips: RV34
Hair: E08/YR18/YR07/YR04/Y17
Scarf: G07/YG09/YG05
Dress/Shoes/Headband: BV04/BV00/BV02
Stripes/Tights: V12/V01/RV00

Scooby
Fur: E27/E25/E23/W9
Collar: BG45/BG01
Tongue/Ears: RV34/RV32
Nose: W9/W7/W5/0

Close Up of Shaggy, Scooby and Daphne
Close Up of Shaggy, Scooby and Daphne

————————–

Card Recipe for
Have a Spooktacular Birthday Card:

Teen Detectives, Kindred Stamps
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Large Slimline with Sliders, Lawn Fawn
Spooky Fence Die-Namics, My Favorite Things
Halloween Scene Edgelits, Stampin’ Up!
Wicked Dies, Stampin’ Up!
Cauldron Framelits Dies, Stampin’ Up!
Caldron Bubble Stamp Set
Spooky Village Stamp Set, Lawn Fawn
Graveyard Gate Stamp Set, Stampin’ Up!
Classic Label Punch, Stampin’ Up!
Glossy Accents
Shimmery Crystal Effects, Stampin’ Up!
VersaMark Ink
Shimmery White Stampin’ Emboss Powder, Stampin’ Up!
Rich Razzleberry Classic Stampin’ Pad, Stampin’ Up!
Night of Navy Classic Stampin’ Pad, Stampin’ Up!
Tuxedo Black Memento Ink Pad, Stampin’ Up!
Old Olive Classic Stampin’ Pad, Stampin’ Up!
Stampin Sponges, Stampin’ Up!
Basic Black, Night of Navy, and Whisper White Card Stock
2 Pennies for slider
Finished card size: 8.5” x 3.5”

————————–

My other Teen Detectives Card that I made for my brother. I used the same colours of the characters for both cards.

————————–

You tried to hide your birthday & you would have gotten away with it if it wasn’t for those pesky kids!.

To view my other Copic cards, please click here.

Hope you like my Have a Spooktacular Birthday Card using Teen Detectives by Kindred Stamps!

Thank you for stopping by!

Hugs,
Laurie

My Roll With It Shaker Card

My Roll With It Shaker Card
My Roll With It Shaker Card

Tomorrow is my Hubby’s birthday! So, today I am sharing with you my Roll With It Shaker Card that I plan to give to him. I thought a shaker card would be so fun! It is using two stamp sets, Whiskey Business and Game On, that are perfect for him! We love to play games and have game time with our friends and family on a regular basis! Now he can shake the card and his dice will always come up 6 and 5! LOL! I even coloured the dice with the Real Red and Just Jade Stampin’ Blends to match the ones that he uses. In addition to gaming, he loves his single malt scotch and is always trying different types.

Details of My Roll With It Shaker Card

For my card, I wanted to create a masculine feel. So, the In Good Taste Designer Series Paper with Early Espresso card stock was perfect for it! I use the two largest Stitched Nested Labels to create my window frame. I stamped the checkerboard in Memento Black off twice before I randomly stamped it a third time on my Whisper White background piece. Once I did this, I created my shaker part with Foam Adhesive Strips, a piece of Window Sheet, a pinch of Woven Threads Sequins and my “dice”.

For the dice and the scotch, I stamped them on Whisper White with Memento Black. I then used my Stampin’ Blends to colour them. The dice were Real Red Dark/Light and Just Jade Dark/Light with Cinnamon Cider Dark/Light for the ground. The Scotch was Cinnamon Cider Dark/Light and Mango Melody Dark with Balmy Blue Light and Color Lifter for the glass. Once these were coloured, I fussy cut them out.

The sentiment stamped in Memento Black from Game On with a splash of Real Red behind it was perfect for my card! The finishing touch was decorating the inside by combining the two stamp sets again to create my sentiment.

Inside of Close Up of Dice from My Roll With It Shaker Card
Inside of Close Up of Dice from My Roll With It Shaker Card

My Roll With It Shaker Card in Action

My Roll With It Shaker Card in Action
My Roll With It Shaker Card in Action

Here is a video that I presented to some fellow demonstrators that shows how to colour with Stampin’ Blends the decanter from the Whiskey Business Stamp Set.

My Whiskey Business Colouring Tutorial
My Whiskey Business Colouring Tutorial

Supplies:

Stamps: Whiskey Business Stamp Set (152550), Game On Stamp Set (152646)

Dies: Stitched Nested Labels Dies (149638)

Inks:Tuxedo Black Memento Ink Pad (132708)

Paper: Real Red (102482), Early Espresso (119686), Whisper White (100730), Window Sheets (142314), In Good Taste Designer Series Paper(152494)

Accessories: Woven Threads Sequin Assortment(149498), Cinnamon Cider Stampin’ Blends Combo Pack (153105), Mango Melody Stampin’ Blends Combo Pack (154888), Balmy Blue Stampin’ Blends Combo Pack (148544), Stampin’ Blends Color Lifter (144608), Paper Snips (103579), Bone Folder (102300), Stampin’ Seal (152813), Stampin’ Dimensionals (104430), Foam Adhesive Strips (141825), Mini Glue Dots (103683)

Measurements: 

  • Early Espresso: 2 pieces of each
    • 8 ½” x 5 ½”; scored at 4 ¼”
    • 5” x 2 5/8” (shaker frame)
  • Whisper White: 4 pieces of each
    • 5” x 3” (background piece)
    • Scraps (dice, decanter, glass)
    • 3” x ½” (sentiment)
    • 4 ¾” x 4” (Inside of card)
  • Real Red: 2 pieces of each:
    • 5” x 4 ¼” (Inside of card)
    • Scrap
  • Window Sheet: 5” x 3”
  • In Good Taste Designer Series Paper: 5” x 4 ¼”

For Further Info:

Hope you like my Roll With it Shaker Card!

For another Whiskey Business Card, check out this link.

You will find the items listed above in my online store.